It looks like it is partially working. Your net list has S2/R2-1 which is one hierarchical level down from SW1-2.
Is the U?-? the symbol that has the lower level schematic? Steve Meier On Tue, 2007-07-17 at 17:04 +0100, Peter Baxendale wrote: > Been experimenting with hierarchical design with gschem. When I generate > the netlist using gsch2pcb I get a U?-? on every net that goes to one > of the io objects. > > As per the wiki (I think), I've used an in-1.sym in the sub schematics > where they get input from the top level schematic, and an out-1.sym for > outputs to the top level. In each case, I've set the io symbol's refdes > to the same as the pinlabel attribute of the corresponding pin of the > top level symbol. The generated netlist picks up all the things it > should do from the sub pages, eg: > unnamed_net5 S2/R2-1 S2/U1-1 SW1-2 U?-? > > I'd much appreciate it if someone could tell me where I'm going wrong. > _______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user