thanks for the history . Is there a new tutorial with gnucap use, somewhere ?
Ludovic On Fri, Aug 8, 2008 at 9:04 AM, Ludovic SMADJA <[EMAIL PROTECTED]>wrote: > Hi, everyone > > In order to create and simulate a quite complex schema, I've first tried to > follow the tutorial (http://www.brorson.com/gEDA/SPICE/intro.html) to > create a simple subckt with gschem and simulate it. > > The subschema is a simple filter with 1 resistor and 1 capacitor. I've > integrated the schema in an upper one with one voltage source and a charge > resistor. > > When I generate the netlist, gnetlist doesn't complains about anything but > the generated netlist is incorrect, the subckt is created but with the full > schema, not only the subschema : > > here's my files and the command I used. Could you indicate what's I've do > wrong, I've tried all the past day to generate a correct netlist and I can't > see what's the problem ? > > Regards, > > Ludovic SMADJA > > Commands : > > gnetlist -g spice-sdb -o filtre.cir filtre.sch > > gnetlist -g spice-sdb -o testFiltre.cir testFiltre.sch > > ************************************************** > [EMAIL PROTECTED] test]$ cat filtre.sch > v 20071231 1 > C 40000 40000 0 0 0 title-B.sym > C 46600 46300 1 0 0 resistor-2.sym > { > T 47000 46650 5 10 0 0 0 0 1 > device=RESISTOR > T 46800 46600 5 10 1 1 0 0 1 > refdes=R1 > T 46600 46300 5 10 1 0 0 0 1 > value=100k > } > C 48100 45300 1 90 0 capacitor-1.sym > { > T 47400 45500 5 10 0 0 90 0 1 > device=CAPACITOR > T 47600 45500 5 10 1 1 90 0 1 > refdes=C1 > T 47200 45500 5 10 0 0 90 0 1 > symversion=0.1 > T 48100 45300 5 10 1 0 0 0 1 > value=1Uf > } > C 44100 47600 1 0 0 spice-subcircuit-LL-1.sym > { > T 44200 47900 5 10 0 1 0 0 1 > device=spice-subcircuit-LL > T 44200 48000 5 10 1 1 0 0 1 > refdes=A1 > T 44200 47700 5 10 1 1 0 0 1 > model-name=filtre_model > T 44100 47600 5 10 1 0 0 0 1 > value=filtre_model > } > C 46100 46700 1 180 0 spice-subcircuit-IO-1.sym > { > T 45200 46300 5 10 0 1 180 0 1 > device=spice-IO > T 45250 46450 5 10 1 1 180 0 1 > refdes=P1 > T 46100 46700 5 10 1 0 0 0 1 > pinseq=1 > T 46100 46700 5 10 1 0 0 0 1 > pinlabel=IN > T 46100 46700 5 10 1 0 0 0 1 > value=IN > } > N 45900 46400 46600 46400 4 > N 47900 46400 47900 46200 4 > N 47500 46400 48600 46400 4 > N 47900 45300 47900 44900 4 > N 45900 44900 48700 44900 4 > C 46100 45200 1 180 0 spice-subcircuit-IO-1.sym > { > T 45200 44800 5 10 0 1 180 0 1 > device=spice-IO > T 45250 44950 5 10 1 1 180 0 1 > refdes=P2 > T 46100 45200 5 10 1 0 0 0 1 > pinseq=2 > T 46100 45200 5 10 1 0 0 0 1 > pinlabel=GND1 > T 46100 45200 5 10 1 0 0 0 1 > value=GND1 > } > C 48400 46100 1 0 0 spice-subcircuit-IO-1.sym > { > T 49300 46500 5 10 0 1 0 0 1 > device=spice-IO > T 49250 46350 5 10 1 1 0 0 1 > refdes=P3 > T 48400 46100 5 10 1 0 0 0 1 > pinseq=3 > T 48400 46100 5 10 1 0 0 0 1 > pinlabel=OUT > T 48400 46100 5 10 1 0 0 0 1 > value=OUT > } > C 48500 44600 1 0 0 spice-subcircuit-IO-1.sym > { > T 49400 45000 5 10 0 1 0 0 1 > device=spice-IO > T 49350 44850 5 10 1 1 0 0 1 > refdes=P4 > T 48500 44600 5 10 1 0 0 0 1 > pinseq=4 > T 48500 44600 5 10 1 0 0 0 1 > pinlabel=GND2 > T 48500 44600 5 10 1 0 0 0 1 > value=GND2 > } > > **************************************************** > [EMAIL PROTECTED] test]$ cat filtre.sym > v 20071231 1 > B 300 300 2800 1200 3 0 0 0 -1 -1 0 -1 -1 -1 -1 -1 > T 3100 1600 9 10 0 0 0 0 1 > device=filtre_model > T 1700 400 9 10 1 1 0 3 1 > refdes=X? > T 1700 800 9 10 1 1 0 3 1 > Filtre > P 0 1100 300 1100 1 0 0 > { > T 350 1100 9 10 1 1 0 1 1 > pinlabel=P1 > T 200 1150 5 8 1 1 0 6 1 > pinnumber=1 > T 200 1150 5 8 0 1 0 6 1 > pinseq=1 > T 0 1100 5 10 1 0 0 0 1 > refdes=IN > } > P 0 700 300 700 1 0 0 > { > T 350 700 9 10 1 1 0 1 1 > pinlabel=P2 > T 200 750 5 8 1 1 0 6 1 > pinnumber=2 > T 200 750 5 8 0 1 0 6 1 > pinseq=2 > T 100 700 5 10 1 0 0 0 1 > refdes=GND1 > } > P 3400 1100 3100 1100 1 0 0 > { > T 3050 1100 9 10 1 1 0 7 1 > pinlabel=P3 > T 3200 1150 5 8 1 1 0 0 1 > pinnumber=3 > T 3200 1150 5 8 0 1 0 0 1 > pinseq=3 > T 3400 1100 5 10 1 0 0 0 1 > refdes=OUT > } > P 3400 700 3100 700 1 0 0 > { > T 3050 700 9 10 1 1 0 7 1 > pinlabel=P4 > T 3200 750 5 8 1 1 0 0 1 > pinnumber=4 > T 3200 750 5 8 0 1 0 0 1 > pinseq=4 > T 3400 700 5 10 1 0 0 0 1 > refdes=GND2 > } > T 1700 400 8 10 0 1 0 0 1 > source=filtre.sch > > > ********************************************** > [EMAIL PROTECTED] test]$ cat testFiltre.sch > v 20071231 1 > C 40000 40000 0 0 0 title-B.sym > C 47100 46700 1 0 0 filtre.sym > { > T 50200 48300 5 10 0 0 0 0 1 > device=filtre_model > T 48800 47100 5 10 1 1 0 3 1 > refdes=X1 > T 48100 46500 5 10 1 0 0 0 1 > file=filtre.cir > T 47100 46700 5 10 1 0 0 0 1 > model-name=filtre_model > } > C 51900 47100 1 90 0 resistor-2.sym > { > T 51550 47500 5 10 0 0 90 0 1 > device=RESISTOR > T 51600 47300 5 10 1 1 90 0 1 > refdes=RTest > } > C 46200 47200 1 90 0 voltage-1.sym > { > T 45700 47300 5 10 0 0 90 0 1 > device=VOLTAGE_SOURCE > T 45700 47500 5 10 1 1 90 0 1 > refdes=V1 > } > N 46000 48100 47100 48100 4 > N 47100 48100 47100 47800 4 > N 46000 47200 47100 47200 4 > N 47100 47200 47100 47400 4 > N 50500 47800 50500 48400 4 > N 50500 48400 51800 48400 4 > { > T 50500 48400 5 10 1 0 0 0 1 > netname=test > } > N 51800 48400 51800 48000 4 > N 50500 47400 50500 46800 4 > N 50500 46800 51800 46800 4 > { > T 50500 46800 5 10 1 0 0 0 1 > netname=test2 > } > N 51800 46800 51800 47100 4 > > *********************************************************** > [EMAIL PROTECTED] test]$ cat testFiltre.cir > ******************************* > * Begin .SUBCKT model * > * spice-sdb ver 4.28.2007 * > ******************************* > .SUBCKT filtre_model > *============== Begin SPICE netlist of main design ============ > V1 2 1 unknown > X1/C1 2 test 1Uf > RTest test2 test > X1/R1 1 test 100k > .ends filtre_model > ******************************* > > > -- > Ludovic SMADJA > > > > _______________________________________________ > geda-user mailing list > geda-user@moria.seul.org > http://www.seul.org/cgi-bin/mailman/listinfo/geda-user > > -- Ludovic SMADJA
_______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
