just goes to show i should read all of the messages in a thread before responding to a thread On Oct 2, 2008, at 3:59 PM, Peter Clifton wrote:
> On Thu, 2008-10-02 at 14:48 -0700, Kingston Co. wrote: > >> Also, you can fix this by editing your *.pcb file manually and adding >> the "clearline" flag to all your lines. >>> >> >> (And you had every trace selected at the time you ran the command?) >> >> Yes on both Computers! >> >> Both Systems do the same thing. > > I just had a 'doh' moment. There are two very similar behaviours which > you might be seeing. > > The one we've been directing you to correct, is where tracks on the > board are set to join with the polygon. Pins on elements should still > clear the polygon. > > The second, is where the polygon blindly joins with everything, > including pins. Try mousing over the polygon and hitting "s", see if > that clears the behaviour? > > If not, send one of the devs. (DJ/Dan/Ben/myself) a copy of the board > file by private email, and we'll have a poke at whats going on. You > don't need to send the whole design, just enuogh so we can see an > example of the symptom (you could make a copy and delete off most of > the > actual layout if that is priveledged.). > > Best wishes, > > -- > Peter Clifton > > Electrical Engineering Division, > Engineering Department, > University of Cambridge, > 9, JJ Thomson Avenue, > Cambridge > CB3 0FA > > Tel: +44 (0)7729 980173 - (No signal in the lab!) > > > > _______________________________________________ > geda-user mailing list > geda-user@moria.seul.org > http://www.seul.org/cgi-bin/mailman/listinfo/geda-user _______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user