On Tue, 2009-03-31 at 14:46 +0100, richard.b...@blueyonder.co.uk wrote: > Sorry > I must be getting a bit thick in my old age, are you saying that in the > second quandrant, ie where the first quadrant is between 0 degrees and > 90 degs, and the second quadrant is between 90 degs and 180 degs, that y
Coordinates do not depend direct on quadrant. x increases to the right. y increases to the bottom. 0,0 is top left for pcb boards. footprint/elements may have 0/0 at different positions, center or at a pin. Have you seen the verbose http://www.brorson.com/gEDA/land_patterns_20070818.pdf and my short description http://www.ssalewski.de/PcbFootprintRef.txt To your capacitor footprints: They are rectangular, so its very easy to make them with my sfg script, I will make it this evening. If you have Ruby installed you may do it yourself. I was already going to make them, but I have seen a minimal difference in your dimensions and dimensions on datasheet -- have you measured it instead of using dimensions from datasheet? I will check this in more detail this evening, the rest takes only a few minutes. I think a working cap is on my page, WIMA. Pitch is right, shape may be wrong by one mm, this is no big problem. Seems that displaying the shape graphical does not work correctly at gedasymbols currently. Best regards Stefan Salewski _______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user