DJ Delorie wrote: > Just got a box of panels from Advanced Circuits. Five panels, ten > boards per panel (two each powermeter, usb-gpio pod, and three pod > modules - ten sets of boards total). Joy! > > Unfortunately, I have no way of separating them into individual boards > yet. Sadness! > > But I do have a 60 degree v-scoring bit for my router table. Joy! > > Last time I used it, the pcbs were too flexible for the big hole the > table had around the bit. Sadness! > > I was thinking of taking an old 7" table saw blade and re-grinding it > to a 60 degree point. I can make a zero-clearance insert for it, to > ensure correct cuts. Joy! > > However, I don't have any of the parts for the boards yet. Sadness! > > But now I get to go through the BOMs, figure out the best parts to > use, put together a digikey order, come up with some hobby money, and > wait for it all to arrive. Joy! No, wait... sadness? Crap. > Don't forget the perforations, or routed grooves next time :-)
There should be a DRC check to prevent that kind of slip. Steve _______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user