Download the latest spNet (0.9.1) here:
[1]http://spnet.code-fusion.net/ Completely ignore the FAQ/Documentation on the site it is out of date. Download the symbols on the download page too and replace your current gschem symbols with the new ones you downloaded (very important). You also need to set up your ~/.spnetlibs to point to your symbols/schematics directory, you can look at the documentation there as that part of it is accurate. You can also download my latch schematic for an example. Sorry the documentation and explanation is so sketchy as this isnt a official release and don't plan on making an official release until the documentation is up to date. If you have any questions go ahead and post them on this list and i'll be glad to help. Also report any bugs. -Anthony On Mon, Jun 22, 2009 at 1:50 AM, A.Burinskiy <[2]alexb...@gmail.com> wrote: Hi, I'm using gnetlist -g spice-sdb ... 1. Netlister doesn't exctract subcircuits as a subcircuits, but correct refdes instead. It puts, for example MX1/M23 instead of .subckt ... M23 .ends X1 .... 2. netlister also doesn't correct Resistors. It is supposed that refdes will be corrected as RX1/R3, but gnetlist produces X1/R3 3. ngspice doesn't recognise MX1/M23 .... - it get confused with model name and treat it as a node. MX1_M23 fixes the problem, but keeping subckt sounds more reasonable against flattening netlist. Is any way to correct gnet_spice-sdb to get list subckt as a subckt? I try CVS version and 1.5.2 with the same bad results. Thanks, Alex. _______________________________________________ geda-user mailing list [3]geda-u...@moria.seul.org [4]http://www.seul.org/cgi-bin/mailman/listinfo/geda-user References 1. http://spnet.code-fusion.net/ 2. mailto:alexb...@gmail.com 3. mailto:geda-user@moria.seul.org 4. http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
_______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user