> No, you have to select a bunch of individual signals (they need not > be the full set of the original bus, or even all related) and then > "Combine Up" (or Combine Down).
Yup, I figured that out quickly enough. I just thought automatic un-expand would be an obvious thing, but it didn't work when I tried it. I.e. the fact that it wasn't a toggle was surprising. What my logic analyzer does... well, download it if you have windows or wine: http://www.pctestinstruments.com/downloads.htm (it runs in demo mode if you don't have the hardware). Anyway... if you have a bus (they call them "groups") and expand it, it expands like a tree view - it shows the bus line *and* the component wires under it: http://www.delorie.com/pcb/tmp/logicport-bus.png Here, the "RAMP DATA" bus is expanded into Counter5 through Counter10, but you can see both the wire signals and the numerical combined value in the display. _______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user