Holy miniature footprints Batman!!!
I'm trying to solder a 10 pin MSOP chip to a home made circuit board. The pitch of this chip is just 0.5 mm. We tried using the slightests of dabs of solder across the pins and then used a heat gun the melt the solder but now I have a chip soldered down with two five pin solder blobs on each side. My next step is to use solder wick to try and wick up the excess but I wanted to see if there is a better way of doing this first. Thanks
_______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
