Thanks very much! The first two are almost exactly what I had posted, so thats resolved. In the case of the third, (https://bugs.launchpad.net/geda/+bug/698570), I was curious to see what gnetlist was doing, so I ran it on the schematics with the options -g geda (Netlist format = geda) and -v (verbose mode).
In the resulting file, i see the lines: START renamed-nets DVDD_FPGA -> Vcco2 END renamed-nets Which definitely means that gnetlist understands and interprets correctly the fact that the two nets are shorted and drops one name. Just that this doesn't seem to be happening correctly for multiple renamings. ~Abhijit 2011/4/5 Krzysztof Kościuszkiewicz <k.kosciuszkiew...@gmail.com> > > 2011/4/5 Abhijit Kshirsagar <abhijit...@gmail.com>: > > > I have multi-page schematics with a number of off-page connectors > > (realised using the symbols input-1.sym and input-2.sym) as described > > in the howto: > > [1]http://www.geda.seul.org/wiki/geda:na_howto#what_is_the_net_attribut > > e_used_for > > I noticed that if multiple net attributes happen to be present on the > > same net in the schematic, then the netlist seems to treat them as > > completely different nets and /ignores/ any interconnections. > > I suspect your case is covered by one of the bugs below: > https://bugs.launchpad.net/geda/+bug/698395 > https://bugs.launchpad.net/geda/+bug/698524 > https://bugs.launchpad.net/geda/+bug/698570 > > Two of them were recently fixed in the git HEAD, so you can try to use > development version of gnetlist to check. > The remaining bug is harder to fix. > -- > Krzysztof Kościuszkiewicz > "Simplicity is the ultimate sophistication" -- Leonardo da Vinci > > > _______________________________________________ > geda-user mailing list > geda-user@moria.seul.org > http://www.seul.org/cgi-bin/mailman/listinfo/geda-user _______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
