Hi Matheus,

Thanks for the prompt response. I am not certain what you mean by kernel.
Do you mean use a different vmlinux? I tried both vmlinux and
vmlinux_2.6.27-gcc_4.3.4.
I also tried recompiling system/alpha/palcode/ and putting the resultant
binary in m5_system_2.0b3/binaries. None of them made any difference.

Thanks!
Stevo

On Mon, Oct 13, 2014 at 10:25 AM, Matheus Alcântara Souza <
[email protected]> wrote:

> I guess it is a kernel problem. Can you check out this? Or try to use
> another kernel?
>
> Atenciosamente,
> Matheus Alcântara Souza
> (Via iPhone)
>
> Em 13/10/2014, às 12:22, Stevenson Jian via gem5-users <
> [email protected]> escreveu:
>
> Hi all,
>
> I am trying to run PARSEC in Gem5 under full system mode. The benchmarks
> run correctly when I set the simulated physical memory size to <=2GB.
> However, I want to simulate a physical memory with 4GB.  When I set "return
> '4000MB'" in line 49 of configs/common/Benchmarks.py to set the simulated
> physical memory size to 4GB and run PARSEC again (using command
> "build/ALPHA/gem5.fast configs/example/fs.py -n 2
> --script=../parsecRunscripts/blackscholes_2c_simlarge_ckpts.rcS"), I get
> the following error:
> **********simout******************
> ...
> panic: M5 panic instruction called at pc = 0xfffffc000031add0.
>  @ cycle 470482786500
> [execute:build/ALPHA/arch/alpha/generated/atomic_simple_cpu_exec.cc, line
> 11210]
> Memory Usage: 4273680 KBytes
> Program aborted at cycle 470482786500
> Aborted
> **********system.terminal*********
> ...
> setup: forcing memory size to 33554432K (from -98304K).^M
> freeing pages 1103:4194304^M
> reserving pages 1103:1167^M
> SMP: 2 CPUs probed -- cpu_present_map = 3^M
> Built 1 zonelists in Zone order, mobility grouping on.  Total pages:
> 4165632^M
> Kernel command line: root=/dev/hda1 console=ttyS0^M
> PID hash table entries: 4096 (order: 12, 32768 bytes)^M
> Using epoch = 1900^M
> Console: colour dummy device 80x25^M
> console [ttyS0] enabled^M
> Dentry cache hash table entries: 4194304 (order: 12, 33554432 bytes)^M
> Inode-cache hash table entries: 2097152 (order: 11, 16777216 bytes)^M
> Memory: 33265208k/33554432k available (3757k kernel code, 285456k
> reserved, 261k data, 208k init)^M
> Unable to handle kernel paging request at virtual address
> 0000000000000000^M
> CPU 0 swapper(0): Oops 1^M
> pc = [<fffffc00003a12dc>]  ra = [<fffffc00003a11bc>]  ps = 0007    Not
> tainted^M
> pc is at cache_alloc_refill+0x1ec/0x780^M
> ra is at cache_alloc_refill+0xcc/0x780^M
> v0 = 0000000000000001  t0 = 0000000000000000  t1 = 0000000000000000^M
> t2 = 0000000000000000  t3 = 0000000000000001  t4 = 0000000000000000^M
> t5 = 0000000000000000  t6 = fffffc07ff000000  t7 = fffffc0000814000^M
> s0 = fffffc000080c2a8  s1 = ffffffffffffffff  s2 = fffffc0000822710^M
> s3 = fffffc000080c408  s4 = fffffc07ff000030  s5 = 0000000000000000^M
> s6 = fffffc000080c448^M
> a0 = fffffc000080c448  a1 = 0000000000000009  a2 = 0000000000000001^M
> a3 = 0000000000000002  a4 = 0000000000000000  a5 = 0000000000000044^M
> t8 = ffffffffffffffff  t9 = 0000000000200200  t10= 00000000ffffffff^M
> t11= fffffc000080c418  pv = fffffc00006bb0f0  at = fffffc000080c428^M
> gp = fffffc000085bf40  sp = fffffc0000817d38^M
> Trace:^M
> [<fffffc00003a10b8>] kmem_cache_alloc+0xb8/0xf0^M
> [<fffffc00003a3334>] kmem_cache_create+0x1f4/0x550^M
> [<fffffc000031001c>] __start+0x1c/0x20^M
> ^M
> Code: 4821f621  402207a1  e43fffe4  a4470000  a4670008  47f6040a
> <b4430000> b4620008 ^M
> Kernel panic - not syncing: Attempted to kill the idle task!^M
>
> ****************************************
>
> To solve the above issue, I looked up former posts  and got the idea to
> recompile system/alpha/console/console.c. I recompiled console.c using the
> cross compile tool on the Gem5 website (
> http://www.m5sim.org/dist/current/alpha_crosstool.tar.bz2). Then I put
> the compiled console binary in the m5_system_2.0b3 folder. However, now I
> am getting a different error message:
>
> **********************simout***********
> info: Entering event queue @ 0.  Starting simulation...
> info: Launching CPU 1 @ 686481000
> panic: M5 panic instruction called at pc = 0x8e41.
>  @ cycle 697785500
> [execute:build/ALPHA/arch/alpha/generated/atomic_simple_cpu_exec.cc, line
> 11210]
> Memory Usage: 4268400 KBytes
> Program aborted at cycle 697785500
> Aborted
>
> **********************system.terminal*****
> ^MGot Configuration 623
> ^Mmemsize FA000000 pages 7D000
> ^MFirst free page after ROM 0xFFFFFC0000018000
> ^MHWRPB 0xFFFFFC0000018000 l1pt 0xFFFFFC0000046000 l2pt 0xFFFFFC0000048000
> l3pt_rpb 0xFFFFFC000004A000 l3pt_kernel 0xFFFFFC000004E000 l2reserv
> 0xFFFFFC000004C000
> ^Mkstart = 0xFFFFFC0000310000, kend = 0xFFFFFC0000899860, kentry =
> 0xFFFFFC0000310000, numCPUs = 0x2
> ^MCPU Clock at 2000 MHz IntrClockFrequency=1024
> ^MBooting with 2 processor(s)
> ^MKSP: 0x20043FE8 PTBR 0x23
> ^MKSP: 0x20043FE8 PTBR 0x23
> ^MConsole Callback at 0x0, fixup at 0x0, crb offset: 0x790
> ^MMemory cluster 0 [0 - 392]
> ^MMemory cluster 1 [392 - 511608]
> ^MInitalizing mdt_bitmap addr 0xFFFFFC0000038000 mem_pages 7D000
> ^MConsoleDispatch at virt 100008D8 phys 188D8 val FFFFFC00000100A8
> ^MBootstraping CPU 1 with sp=0xFFFFFC000007C000
> ^Munix_boot_mem ends at FFFFFC000007E000
> ^Mk_argc = 0
> ^Mjumping to kernel at 0xFFFFFC0000310000, (PCBB 0xFFFFFC0000018180 pfn
> 1101)
>
> ************************************************
>
> I then ran GDB on gem5.debug to try to locate the source of the second
> error. Here is the gdb output:
>
> **********GDB*************
> info: kernel located at:
> /home/xunjian1/scratch/m5_system_2.0b3/binaries/vmlinux_2.6.27-gcc_4.3.4
> Listening for system connection on port 3456
>       0: system.tsunami.io.rtc: Real-time clock set to Thu Jan  1 00:00:00
> 2009
> warn: CoherentBus system.membus has no snooping ports attached!
> 0: system.remote_gdb.listener: listening for remote gdb #0 on port 7000
> 0: system.remote_gdb.listener: listening for remote gdb #1 on port 7001
> **** REAL SIMULATION ****
> 9223372036854775807
> info: Entering event queue @ 0.  Starting simulation...
> info: Launching CPU 1 @ 686481000
> panic: M5 panic instruction called at pc = 0x8e41.
>  @ cycle 697785500
> [execute:build/ALPHA/arch/alpha/generated/atomic_simple_cpu_exec.cc, line
> 11210]
> Memory Usage: 4276644 KBytes
>
> Program received signal SIGABRT, Aborted.
> 0x00007ffff64f3635 in raise () from /lib64/libc.so.6
> Missing separate debuginfos, use: debuginfo-install
> glibc-2.12-1.132.el6_5.4.x86_64 keyutils-libs-1.4-4.el6.x86_64
> krb5-libs-1.10.3-15.el6_5.1.x86_64 libcom_err-1.41.12-18.el6_5.1.x86_64
> libgcc-4.4.7-4.el6.x86_64 libselinux-2.0.94-5.3.el6_4.1.x86_64
> libstdc++-4.4.7-4.el6.x86_64 openssl-1.0.1e-16.el6_5.14.x86_64
> python-libs-2.6.6-52.el6.x86_64 zlib-1.2.3-29.el6.x86_64
> (gdb) bt
> #0  0x00007ffff64f3635 in raise () from /lib64/libc.so.6
> #1  0x00007ffff64f4e15 in abort () from /lib64/libc.so.6
> #2  0x00000000005925cb in __exit_message (prefix=0x11426f7 "panic",
> code=-1, func=0x1142d80 "execute",
>     file=0x1142780
> "build/ALPHA/arch/alpha/generated/atomic_simple_cpu_exec.cc", line=11210,
>     fmt=0x11429b0 "M5 panic instruction called at pc = %#x.", a01=...,
> a02=..., a03=..., a04=..., a05=..., a06=..., a07=..., a08=..., a09=...,
>     a10=..., a11=..., a12=..., a13=..., a14=..., a15=..., a16=...) at
> build/ALPHA/base/misc.cc:84
> #3  0x00000000004ba2f5 in AlphaISAInst::M5panic::execute (this=0x357e940,
> xc=0x7ffef5fe4010, traceData=0x0)
>     at build/ALPHA/arch/alpha/generated/atomic_simple_cpu_exec.cc:11210
> #4  0x0000000000850820 in AtomicSimpleCPU::tick (this=0x7ffef5fe4010) at
> build/ALPHA/cpu/simple/atomic.cc:525
> #5  0x000000000084c544 in AtomicSimpleCPU::TickEvent::process
> (this=0x7ffef60e4280) at build/ALPHA/cpu/simple/atomic.cc:72
> #6  0x0000000000ccd576 in EventQueue::serviceOne (this=0x1992b70) at
> build/ALPHA/sim/eventq.cc:204
> #7  0x0000000000d186dc in simulate (num_cycles=9223372036854775807) at
> build/ALPHA/sim/simulate.cc:73
> #8  0x0000000000c7ad88 in _wrap_simulate__SWIG_0 (args=0x28ba7d0) at
> build/ALPHA/python/swig/event_wrap.cc:4491
>
> *******************************
>
> I am lost at what I should do next. Please help. Thanks!
>
> Stevo
>
> _______________________________________________
> gem5-users mailing list
> [email protected]
> http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users
>
>
_______________________________________________
gem5-users mailing list
[email protected]
http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users

Reply via email to