Hi Matheus, Thanks again for the prompt response. I did an online search of "gem5 highmem" in hope of finding how to set highmem. However, I wasn't able to find a helpful source. I am wondering if you could help point me to how to set it?
Thanks! Stevo On Mon, Oct 13, 2014 at 12:44 PM, Matheus Alcântara Souza < [email protected]> wrote: > I've done a quick research about that. It seems you need to use the > HIGHMEM option. Not sure if it works... > > Atenciosamente, > Matheus Alcântara Souza > (Via iPhone) > > Em 13/10/2014, às 14:29, Stevenson Jian <[email protected]> > escreveu: > > Hi Matheus, > > Thanks for the prompt response. > > I already tried recompiling the console binary. It resulted in new errors. > See the second half of the original post. > > I saw on the website you linked that there are many possible kernel > versions. Which kernel do you recommend that I recompile? > > Thanks! > Stevo > > On Mon, Oct 13, 2014 at 10:42 AM, Matheus Alcântara Souza < > [email protected]> wrote: > >> Hello Stevo, >> >> Yes, a different vmlinux. Unfortunately, I never build a new kernel to >> gem5. Some information here: >> http://www.m5sim.org/Compiling_a_Linux_Kernel >> >> Other option is to recompile the console binary. Take a look at this >> thread: https://www.mail-archive.com/[email protected]/msg03280.html >> >> Best >> Matheus >> >> 2014-10-13 12:30 GMT-03:00 Stevenson Jian <[email protected]>: >> >> Hi Matheus, >>> >>> Thanks for the prompt response. I am not certain what you mean by >>> kernel. Do you mean use a different vmlinux? I tried both vmlinux and >>> vmlinux_2.6.27-gcc_4.3.4. I also tried recompiling >>> system/alpha/palcode/ and putting the resultant binary in >>> m5_system_2.0b3/binaries. None of them made any difference. >>> >>> Thanks! >>> Stevo >>> >>> On Mon, Oct 13, 2014 at 10:25 AM, Matheus Alcântara Souza < >>> [email protected]> wrote: >>> >>>> I guess it is a kernel problem. Can you check out this? Or try to use >>>> another kernel? >>>> >>>> Atenciosamente, >>>> Matheus Alcântara Souza >>>> (Via iPhone) >>>> >>>> Em 13/10/2014, às 12:22, Stevenson Jian via gem5-users < >>>> [email protected]> escreveu: >>>> >>>> Hi all, >>>> >>>> I am trying to run PARSEC in Gem5 under full system mode. The >>>> benchmarks run correctly when I set the simulated physical memory size to >>>> <=2GB. However, I want to simulate a physical memory with 4GB. When I set >>>> "return '4000MB'" in line 49 of configs/common/Benchmarks.py to set the >>>> simulated physical memory size to 4GB and run PARSEC again (using command >>>> "build/ALPHA/gem5.fast configs/example/fs.py -n 2 >>>> --script=../parsecRunscripts/blackscholes_2c_simlarge_ckpts.rcS"), I get >>>> the following error: >>>> **********simout****************** >>>> ... >>>> panic: M5 panic instruction called at pc = 0xfffffc000031add0. >>>> @ cycle 470482786500 >>>> [execute:build/ALPHA/arch/alpha/generated/atomic_simple_cpu_exec.cc, >>>> line 11210] >>>> Memory Usage: 4273680 KBytes >>>> Program aborted at cycle 470482786500 >>>> Aborted >>>> **********system.terminal********* >>>> ... >>>> setup: forcing memory size to 33554432K (from -98304K).^M >>>> freeing pages 1103:4194304^M >>>> reserving pages 1103:1167^M >>>> SMP: 2 CPUs probed -- cpu_present_map = 3^M >>>> Built 1 zonelists in Zone order, mobility grouping on. Total pages: >>>> 4165632^M >>>> Kernel command line: root=/dev/hda1 console=ttyS0^M >>>> PID hash table entries: 4096 (order: 12, 32768 bytes)^M >>>> Using epoch = 1900^M >>>> Console: colour dummy device 80x25^M >>>> console [ttyS0] enabled^M >>>> Dentry cache hash table entries: 4194304 (order: 12, 33554432 bytes)^M >>>> Inode-cache hash table entries: 2097152 (order: 11, 16777216 bytes)^M >>>> Memory: 33265208k/33554432k available (3757k kernel code, 285456k >>>> reserved, 261k data, 208k init)^M >>>> Unable to handle kernel paging request at virtual address >>>> 0000000000000000^M >>>> CPU 0 swapper(0): Oops 1^M >>>> pc = [<fffffc00003a12dc>] ra = [<fffffc00003a11bc>] ps = 0007 Not >>>> tainted^M >>>> pc is at cache_alloc_refill+0x1ec/0x780^M >>>> ra is at cache_alloc_refill+0xcc/0x780^M >>>> v0 = 0000000000000001 t0 = 0000000000000000 t1 = 0000000000000000^M >>>> t2 = 0000000000000000 t3 = 0000000000000001 t4 = 0000000000000000^M >>>> t5 = 0000000000000000 t6 = fffffc07ff000000 t7 = fffffc0000814000^M >>>> s0 = fffffc000080c2a8 s1 = ffffffffffffffff s2 = fffffc0000822710^M >>>> s3 = fffffc000080c408 s4 = fffffc07ff000030 s5 = 0000000000000000^M >>>> s6 = fffffc000080c448^M >>>> a0 = fffffc000080c448 a1 = 0000000000000009 a2 = 0000000000000001^M >>>> a3 = 0000000000000002 a4 = 0000000000000000 a5 = 0000000000000044^M >>>> t8 = ffffffffffffffff t9 = 0000000000200200 t10= 00000000ffffffff^M >>>> t11= fffffc000080c418 pv = fffffc00006bb0f0 at = fffffc000080c428^M >>>> gp = fffffc000085bf40 sp = fffffc0000817d38^M >>>> Trace:^M >>>> [<fffffc00003a10b8>] kmem_cache_alloc+0xb8/0xf0^M >>>> [<fffffc00003a3334>] kmem_cache_create+0x1f4/0x550^M >>>> [<fffffc000031001c>] __start+0x1c/0x20^M >>>> ^M >>>> Code: 4821f621 402207a1 e43fffe4 a4470000 a4670008 47f6040a >>>> <b4430000> b4620008 ^M >>>> Kernel panic - not syncing: Attempted to kill the idle task!^M >>>> >>>> **************************************** >>>> >>>> To solve the above issue, I looked up former posts and got the idea to >>>> recompile system/alpha/console/console.c. I recompiled console.c using the >>>> cross compile tool on the Gem5 website ( >>>> http://www.m5sim.org/dist/current/alpha_crosstool.tar.bz2). Then I put >>>> the compiled console binary in the m5_system_2.0b3 folder. However, now I >>>> am getting a different error message: >>>> >>>> **********************simout*********** >>>> info: Entering event queue @ 0. Starting simulation... >>>> info: Launching CPU 1 @ 686481000 >>>> panic: M5 panic instruction called at pc = 0x8e41. >>>> @ cycle 697785500 >>>> [execute:build/ALPHA/arch/alpha/generated/atomic_simple_cpu_exec.cc, >>>> line 11210] >>>> Memory Usage: 4268400 KBytes >>>> Program aborted at cycle 697785500 >>>> Aborted >>>> >>>> **********************system.terminal***** >>>> ^MGot Configuration 623 >>>> ^Mmemsize FA000000 pages 7D000 >>>> ^MFirst free page after ROM 0xFFFFFC0000018000 >>>> ^MHWRPB 0xFFFFFC0000018000 l1pt 0xFFFFFC0000046000 l2pt >>>> 0xFFFFFC0000048000 l3pt_rpb 0xFFFFFC000004A000 l3pt_kernel >>>> 0xFFFFFC000004E000 l2reserv 0xFFFFFC000004C000 >>>> ^Mkstart = 0xFFFFFC0000310000, kend = 0xFFFFFC0000899860, kentry = >>>> 0xFFFFFC0000310000, numCPUs = 0x2 >>>> ^MCPU Clock at 2000 MHz IntrClockFrequency=1024 >>>> ^MBooting with 2 processor(s) >>>> ^MKSP: 0x20043FE8 PTBR 0x23 >>>> ^MKSP: 0x20043FE8 PTBR 0x23 >>>> ^MConsole Callback at 0x0, fixup at 0x0, crb offset: 0x790 >>>> ^MMemory cluster 0 [0 - 392] >>>> ^MMemory cluster 1 [392 - 511608] >>>> ^MInitalizing mdt_bitmap addr 0xFFFFFC0000038000 mem_pages 7D000 >>>> ^MConsoleDispatch at virt 100008D8 phys 188D8 val FFFFFC00000100A8 >>>> ^MBootstraping CPU 1 with sp=0xFFFFFC000007C000 >>>> ^Munix_boot_mem ends at FFFFFC000007E000 >>>> ^Mk_argc = 0 >>>> ^Mjumping to kernel at 0xFFFFFC0000310000, (PCBB 0xFFFFFC0000018180 pfn >>>> 1101) >>>> >>>> ************************************************ >>>> >>>> I then ran GDB on gem5.debug to try to locate the source of the second >>>> error. Here is the gdb output: >>>> >>>> **********GDB************* >>>> info: kernel located at: >>>> /home/xunjian1/scratch/m5_system_2.0b3/binaries/vmlinux_2.6.27-gcc_4.3.4 >>>> Listening for system connection on port 3456 >>>> 0: system.tsunami.io.rtc: Real-time clock set to Thu Jan 1 >>>> 00:00:00 2009 >>>> warn: CoherentBus system.membus has no snooping ports attached! >>>> 0: system.remote_gdb.listener: listening for remote gdb #0 on port 7000 >>>> 0: system.remote_gdb.listener: listening for remote gdb #1 on port 7001 >>>> **** REAL SIMULATION **** >>>> 9223372036854775807 >>>> info: Entering event queue @ 0. Starting simulation... >>>> info: Launching CPU 1 @ 686481000 >>>> panic: M5 panic instruction called at pc = 0x8e41. >>>> @ cycle 697785500 >>>> [execute:build/ALPHA/arch/alpha/generated/atomic_simple_cpu_exec.cc, >>>> line 11210] >>>> Memory Usage: 4276644 KBytes >>>> >>>> Program received signal SIGABRT, Aborted. >>>> 0x00007ffff64f3635 in raise () from /lib64/libc.so.6 >>>> Missing separate debuginfos, use: debuginfo-install >>>> glibc-2.12-1.132.el6_5.4.x86_64 keyutils-libs-1.4-4.el6.x86_64 >>>> krb5-libs-1.10.3-15.el6_5.1.x86_64 libcom_err-1.41.12-18.el6_5.1.x86_64 >>>> libgcc-4.4.7-4.el6.x86_64 libselinux-2.0.94-5.3.el6_4.1.x86_64 >>>> libstdc++-4.4.7-4.el6.x86_64 openssl-1.0.1e-16.el6_5.14.x86_64 >>>> python-libs-2.6.6-52.el6.x86_64 zlib-1.2.3-29.el6.x86_64 >>>> (gdb) bt >>>> #0 0x00007ffff64f3635 in raise () from /lib64/libc.so.6 >>>> #1 0x00007ffff64f4e15 in abort () from /lib64/libc.so.6 >>>> #2 0x00000000005925cb in __exit_message (prefix=0x11426f7 "panic", >>>> code=-1, func=0x1142d80 "execute", >>>> file=0x1142780 >>>> "build/ALPHA/arch/alpha/generated/atomic_simple_cpu_exec.cc", line=11210, >>>> fmt=0x11429b0 "M5 panic instruction called at pc = %#x.", a01=..., >>>> a02=..., a03=..., a04=..., a05=..., a06=..., a07=..., a08=..., a09=..., >>>> a10=..., a11=..., a12=..., a13=..., a14=..., a15=..., a16=...) at >>>> build/ALPHA/base/misc.cc:84 >>>> #3 0x00000000004ba2f5 in AlphaISAInst::M5panic::execute >>>> (this=0x357e940, xc=0x7ffef5fe4010, traceData=0x0) >>>> at build/ALPHA/arch/alpha/generated/atomic_simple_cpu_exec.cc:11210 >>>> #4 0x0000000000850820 in AtomicSimpleCPU::tick (this=0x7ffef5fe4010) >>>> at build/ALPHA/cpu/simple/atomic.cc:525 >>>> #5 0x000000000084c544 in AtomicSimpleCPU::TickEvent::process >>>> (this=0x7ffef60e4280) at build/ALPHA/cpu/simple/atomic.cc:72 >>>> #6 0x0000000000ccd576 in EventQueue::serviceOne (this=0x1992b70) at >>>> build/ALPHA/sim/eventq.cc:204 >>>> #7 0x0000000000d186dc in simulate (num_cycles=9223372036854775807) at >>>> build/ALPHA/sim/simulate.cc:73 >>>> #8 0x0000000000c7ad88 in _wrap_simulate__SWIG_0 (args=0x28ba7d0) at >>>> build/ALPHA/python/swig/event_wrap.cc:4491 >>>> >>>> ******************************* >>>> >>>> I am lost at what I should do next. Please help. Thanks! >>>> >>>> Stevo >>>> >>>> _______________________________________________ >>>> gem5-users mailing list >>>> [email protected] >>>> http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users >>>> >>>> >>> >> >> >> -- >> >> -- >> Atenciosamente, >> Matheus Alcântara Souza >> > >
_______________________________________________ gem5-users mailing list [email protected] http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users
