Hello,
I tried to run full system simulation for arm64 architecture. I used the
latest gem5 simulator and downloaded prebuilt full system image from gem5
website. The command line I used is:
$ ../gem5/build/ARM/gem5.opt ../gem5/configs/example/fs.py
--machine-type=VExpress_EMM64 --kernel=vmlinux-3.14-aarch64-vexpress-emm64
--disk-image=linaro-minimal-armv8.img --dtb-filename=rtsm_ve-aemv8a.dtb
...
Global frequency set at 1000000000000 ticks per second
info: kernel located at:
/home/wmeng/workspace/livesp/m5_images/binaries/vmlinux-3.14-aarch64-vexpress-emm64
warn: Highest ARM exception-level set to AArch32 but bootloader is for
AArch64. Assuming you wanted these to match.
Listening for system connection on port 5900
Listening for system connection on port 3456
0: system.cpu.isa: ISA system set to: 0x4a0e540 0x4a0e540
0: system.remote_gdb.listener: listening for remote gdb #0 on port 7001
info: Using bootloader at address 0x10
info: Using kernel entry physical address at 0x80080040
info: Loading DTB file:
/home/wmeng/workspace/livesp/m5_images/binaries/rtsm_ve-aemv8a.dtb at
address 0x88000000
**** REAL SIMULATION ****
warn: Existing EnergyCtrl, but no enabled DVFSHandler found.
info: Entering event queue @ 0. Starting simulation...
warn: SCReg: Writing 0 to dcc0:site0:pos0:fn7:dev0
4101426500: system.terminal: attach terminal 0
warn: Tried to read RealView I/O at offset 0x60 that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
10133760032500: system.cpu.break_event: break event panic triggered
10133760033000: system.cpu.break_event: break event panic triggered
10133760033500: system.cpu.break_event: break event panic triggered
10133760034000: system.cpu.break_event: break event panic triggered
I set up the M5_PATH environment variable, and put the kernel and dtb files
in <m5_path>/binaries/, put rootfs image file in <m5_path>/disks/. Thus I
only specify file name instead of full path in command line.
m5term shows the following error:
...
[ 0.047510] TCP: cubic registered
[ 0.047511] NET: Registered protocol family 17
[ 0.642521] input: AT Raw Set 2 keyboard as
/devices/smb.2/motherboard.3/iofpga.7/1c060000.kmi/serio0/input/input0
[ 2.542532] input: PS/2 Generic Mouse as
/devices/smb.2/motherboard.3/iofpga.7/1c070000.kmi/serio1/input/input2
[ 2.542570] VFS: Cannot open root device "sda1" or unknown-block(0,0):
error -6
[ 2.542571] Please append a correct "root=" boot option; here are the
available partitions:
[ 2.542572] Kernel panic - not syncing: VFS: Unable to mount root fs on
unknown-block(0,0)
[ 2.542573] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc2+ #1
[ 2.542574] Call trace:
[ 2.542575] [<ffffffc000087d5c>] dump_backtrace+0x0/0x12c
[ 2.542576] [<ffffffc000087e9c>] show_stack+0x14/0x1c
[ 2.542577] [<ffffffc0004943a0>] dump_stack+0x78/0xc4
[ 2.542578] [<ffffffc0004912dc>] panic+0xe8/0x208
[ 2.542579] [<ffffffc000645d68>] mount_block_root+0x1d8/0x278
[ 2.542580] [<ffffffc000645f20>] mount_root+0x118/0x134
[ 2.542582] [<ffffffc00064607c>] prepare_namespace+0x140/0x188
[ 2.542583] [<ffffffc0006459bc>] kernel_init_freeable+0x1b8/0x1d8
[ 2.542584] [<ffffffc00048f5b4>] kernel_init+0x10/0xd4
Kernel panics on VFS mounting.
When I changed dtb file to either rtsm_ve-aemv8a-2core.dtb or
rtsm_ve-aemv8a-4core.dtb, the kernel hangs after outputing following:
...
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vmalloc : 0xffffff8000000000 - 0xffffffbbffff0000
(245759 MB)
[ 0.000000] vmemmap : 0xffffffbc01c00000 - 0xffffffbc02300000 (
7 MB)
[ 0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 (
64 MB)
[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc020000000 (
512 MB)
[ 0.000000] .init : 0xffffffc000645000 - 0xffffffc000687f40 (
268 kB)
[ 0.000000] .text : 0xffffffc000080000 - 0xffffffc000644104 (
5905 kB)
[ 0.000000] .data : 0xffffffc000688000 - 0xffffffc0006e3618 (
366 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
[ 0.000000] Architected cp15 timer(s) running at 100.00MHz (phys).
[ 0.007706] sched_clock: 56 bits at 100MHz, resolution 10ns, wraps every
2748779069440ns
[ 0.000012] Console: colour dummy device 80x25
[ 0.000013] Calibrating delay loop (skipped) preset value.. 3997.69
BogoMIPS (lpj=19988480)
[ 0.000014] pid_max: default: 32768 minimum: 301
[ 0.000026] Mount-cache hash table entries: 256
[ 0.000086] hw perfevents: no hardware support available
Could anyone help me?
_______________________________________________
gem5-users mailing list
[email protected]
http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users