Thanks. It works.

On Tue, Oct 21, 2014 at 3:59 PM, Anthony Gutierrez via gem5-users <
[email protected]> wrote:

> Because of some of the recent changes to aarch64 in gem5, you need to use
> a newer kernel and dtb file. Instructions for how to obtain them are here:
>
> http://gem5.org/ARM_Linux_Kernel
>
> I think we will be releasing tarballs with newer kernels/images soon.
>
>
> Anthony Gutierrez
> http://web.eecs.umich.edu/~atgutier
>
> On Tue, Oct 21, 2014 at 3:29 PM, Meng Wang via gem5-users <
> [email protected]> wrote:
>
>> Hello,
>> I tried to run full system simulation for arm64 architecture. I used the
>> latest gem5 simulator and downloaded prebuilt full system image from gem5
>> website. The command line I used  is:
>>
>> $ ../gem5/build/ARM/gem5.opt ../gem5/configs/example/fs.py
>> --machine-type=VExpress_EMM64 --kernel=vmlinux-3.14-aarch64-vexpress-emm64
>> --disk-image=linaro-minimal-armv8.img --dtb-filename=rtsm_ve-aemv8a.dtb
>> ...
>> Global frequency set at 1000000000000 ticks per second
>> info: kernel located at:
>> /home/wmeng/workspace/livesp/m5_images/binaries/vmlinux-3.14-aarch64-vexpress-emm64
>> warn: Highest ARM exception-level set to AArch32 but bootloader is for
>> AArch64. Assuming you wanted these to match.
>> Listening for system connection on port 5900
>> Listening for system connection on port 3456
>>       0: system.cpu.isa: ISA system set to: 0x4a0e540 0x4a0e540
>> 0: system.remote_gdb.listener: listening for remote gdb #0 on port 7001
>> info: Using bootloader at address 0x10
>> info: Using kernel entry physical address at 0x80080040
>> info: Loading DTB file:
>> /home/wmeng/workspace/livesp/m5_images/binaries/rtsm_ve-aemv8a.dtb at
>> address 0x88000000
>> **** REAL SIMULATION ****
>> warn: Existing EnergyCtrl, but no enabled DVFSHandler found.
>> info: Entering event queue @ 0.  Starting simulation...
>> warn: SCReg: Writing 0 to dcc0:site0:pos0:fn7:dev0
>> 4101426500: system.terminal: attach terminal 0
>> warn: Tried to read RealView I/O at offset 0x60 that doesn't exist
>> warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
>> 10133760032500: system.cpu.break_event: break event panic triggered
>> 10133760033000: system.cpu.break_event: break event panic triggered
>> 10133760033500: system.cpu.break_event: break event panic triggered
>> 10133760034000: system.cpu.break_event: break event panic triggered
>>
>> I set up the M5_PATH environment variable, and put the kernel and dtb
>> files in <m5_path>/binaries/,  put rootfs image file in <m5_path>/disks/.
>> Thus I only specify file name instead of full path in command line.
>>
>> m5term shows the following error:
>> ...
>> [    0.047510] TCP: cubic registered
>> [    0.047511] NET: Registered protocol family 17
>> [    0.642521] input: AT Raw Set 2 keyboard as
>> /devices/smb.2/motherboard.3/iofpga.7/1c060000.kmi/serio0/input/input0
>> [    2.542532] input: PS/2 Generic Mouse as
>> /devices/smb.2/motherboard.3/iofpga.7/1c070000.kmi/serio1/input/input2
>> [    2.542570] VFS: Cannot open root device "sda1" or unknown-block(0,0):
>> error -6
>> [    2.542571] Please append a correct "root=" boot option; here are the
>> available partitions:
>> [    2.542572] Kernel panic - not syncing: VFS: Unable to mount root fs
>> on unknown-block(0,0)
>> [    2.542573] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc2+ #1
>> [    2.542574] Call trace:
>> [    2.542575] [<ffffffc000087d5c>] dump_backtrace+0x0/0x12c
>> [    2.542576] [<ffffffc000087e9c>] show_stack+0x14/0x1c
>> [    2.542577] [<ffffffc0004943a0>] dump_stack+0x78/0xc4
>> [    2.542578] [<ffffffc0004912dc>] panic+0xe8/0x208
>> [    2.542579] [<ffffffc000645d68>] mount_block_root+0x1d8/0x278
>> [    2.542580] [<ffffffc000645f20>] mount_root+0x118/0x134
>> [    2.542582] [<ffffffc00064607c>] prepare_namespace+0x140/0x188
>> [    2.542583] [<ffffffc0006459bc>] kernel_init_freeable+0x1b8/0x1d8
>> [    2.542584] [<ffffffc00048f5b4>] kernel_init+0x10/0xd4
>>
>> Kernel panics on VFS mounting.
>>
>> When I changed dtb file to either rtsm_ve-aemv8a-2core.dtb or
>> rtsm_ve-aemv8a-4core.dtb, the kernel hangs after outputing following:
>>
>> ...
>> [    0.000000] Virtual kernel memory layout:
>> [    0.000000]     vmalloc : 0xffffff8000000000 - 0xffffffbbffff0000
>> (245759 MB)
>> [    0.000000]     vmemmap : 0xffffffbc01c00000 - 0xffffffbc02300000   (
>>     7 MB)
>> [    0.000000]     modules : 0xffffffbffc000000 - 0xffffffc000000000   (
>>    64 MB)
>> [    0.000000]     memory  : 0xffffffc000000000 - 0xffffffc020000000   (
>>   512 MB)
>> [    0.000000]       .init : 0xffffffc000645000 - 0xffffffc000687f40   (
>>   268 kB)
>> [    0.000000]       .text : 0xffffffc000080000 - 0xffffffc000644104   (
>>  5905 kB)
>> [    0.000000]       .data : 0xffffffc000688000 - 0xffffffc0006e3618   (
>>   366 kB)
>> [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>> [    0.000000] Preemptible hierarchical RCU implementation.
>> [    0.000000]  RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
>> [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16,
>> nr_cpu_ids=2
>> [    0.000000] NR_IRQS:64 nr_irqs:64 0
>> [    0.000000] Architected cp15 timer(s) running at 100.00MHz (phys).
>> [    0.007706] sched_clock: 56 bits at 100MHz, resolution 10ns, wraps
>> every 2748779069440ns
>> [    0.000012] Console: colour dummy device 80x25
>> [    0.000013] Calibrating delay loop (skipped) preset value.. 3997.69
>> BogoMIPS (lpj=19988480)
>> [    0.000014] pid_max: default: 32768 minimum: 301
>> [    0.000026] Mount-cache hash table entries: 256
>> [    0.000086] hw perfevents: no hardware support available
>>
>> Could anyone help me?
>>
>> _______________________________________________
>> gem5-users mailing list
>> [email protected]
>> http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users
>>
>
>
> _______________________________________________
> gem5-users mailing list
> [email protected]
> http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users
>
_______________________________________________
gem5-users mailing list
[email protected]
http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users

Reply via email to