Hi Toa, Amin,

Thanks for your reply.

To discard interbank interference and queueing delay, i have partitioned
the banks so that the latency benchmark has exclusive access to a bank.
Also latency benchmark is a pointer chasing benchmark, which will generate
a single read request at a time.


stats.txt says this:

system.mem_ctrls.avgQLat                     43816.35
# Average queueing delay per DRAM burst
system.mem_ctrls.avgBusLat                    5000.00
# Average bus latency per DRAM burst
system.mem_ctrls.avgMemAccLat                63816.35
# Average memory access latency per DRAM burst
system.mem_ctrls.avgRdQLen                       2.00
# Average read queue length when enqueuing
system.mem_ctrls.avgGap                     136814.25
# Average gap between requests
system.l2.ReadReq_avg_miss_latency::switch_cpus0.data
114767.654811                       # average ReadReq miss latency

The average Gap between requests is equal to the L2 latency + DRAM Latency
for this test. Also avgRdQLen is 2 because cache line size is 64 and DRAM
interface is x32.

Is the final latency sum of avgQLat + avgBusLat + avgMemAccLat ?
Also when avgRdQLen is 2, i am not sure what amounts to high queueing
latency?

Regards,
Prathap



On Tue, Nov 4, 2014 at 1:38 PM, Amin Farmahini <[email protected]> wrote:

> Prathap,
>
> You are probably missing DRAM queuing latency (major reason) and other
> on-chip latencies (such as bus latency) if any.
>
> Thanks,
> Amin
>
> On Tue, Nov 4, 2014 at 1:28 PM, Prathap Kolakkampadath via gem5-users <
> [email protected]> wrote:
>
>> Hello Users,
>>
>> I am measuring DRAM worst case memory access latency(tRP+tRCD
>> +tCL+tBURST) using a latency benchmark on arm_detailed(1Ghz) with 1MB
>> shared L2 cache and  LPDDR3 x32 DRAM.
>>
>> According to DRAM timing parameters, tRP = '15ns, tRCD = '15ns', tCL =
>> '15ns', tBURST = '5ns'. Latency measured by the benchmark on cache hit is
>> 22 ns and on cache miss is  132ns. Which means DRAM memory access latency ~
>> 110ns. However according to calculation it should  be
>> tRP+tRCD+tCL+tBurst+static_backend_latency(10ns) = 60ns.
>>
>>
>> The latency what i observe is almost 50ns higher than what it is supposed
>> to be. Is there anything which I am missing? Do any one know what else
>> could add to the DRAM memory access latency?
>>
>> Thanks,
>> Prathap
>>
>>
>> _______________________________________________
>> gem5-users mailing list
>> [email protected]
>> http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users
>>
>
>
_______________________________________________
gem5-users mailing list
[email protected]
http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users

Reply via email to