Hi Nikos, You wouldn't need to add "init=/root/gem5_init.sh" to the kernel args if you use the lightweight disk image!
Regards, Hoa Nguyen On Mon, Mar 14, 2022, 11:39 Νικόλαος Ταμπουρατζής via gem5-users < gem5-users@gem5.org> wrote: > Thank you Boddy! > > I have also used this image but I get the same READ-ONLY problem. > However, I would like to use Ubuntu in order to install packages using > apt-get install through qemu. Using the "init=/root/gem5_init.sh" > command both images boot only in 10 minutes. > > Best regards, > Nikos > > > Quoting Bobby Bruce <bbr...@ucdavis.edu>: > > > Just remembered: If you're wanting to bi-pass large parts of the Ubuntu > OS > > like this, you may just want to use the "riscv-disk-image" ( > > http://dist.gem5.org/dist/v21-2/images/riscv/busybox/riscv-disk.img.gz), > an > > example usage of which can be found in > > "configs/example/gem5_library/riscv-fs.py": > > > > ``` > > ./build/RISCV/gem5.opt configs/example/gem5_library/riscv-fs.py > > ``` > > > > This disk image is based on BusyBox, which is very light-weight. The > source > > for building this image is found here: > > > https://gem5.googlesource.com/public/gem5-resources/+/refs/heads/stable/src/riscv-fs > > > > -- > > Dr. Bobby R. Bruce > > Room 3050, > > Kemper Hall, UC Davis > > Davis, > > CA, 95616 > > > > web: https://www.bobbybruce.net > > > > > > On Mon, Mar 14, 2022 at 11:12 AM Bobby Bruce <bbr...@ucdavis.edu> wrote: > > > >> Oh I see, I understand now. I thought you managed to disable some > systemd > >> jobs (something I think Hoa struggled with), but you're just bypassing > them > >> by setting init to a script. > >> > >> Nice, I'll let you know when the new image is available. I'll see if I > can > >> reproduce the error you found with the READ-ONLY problem on the new > image. > >> > >> -- > >> Dr. Bobby R. Bruce > >> Room 3050, > >> Kemper Hall, UC Davis > >> Davis, > >> CA, 95616 > >> > >> web: https://www.bobbybruce.net > >> > >> > >> On Mon, Mar 14, 2022 at 11:10 AM Νικόλαος Ταμπουρατζής < > >> ntampourat...@ece.auth.gr> wrote: > >> > >>> Dear Boddy, > >>> > >>> Thank you very much for the clarifications! I used the pre-build disk > >>> image from gem5 resources > >>> (https://github.com/gem5/gem5-resources/tree/stable/src/riscv-ubuntu), > >>> and I add the "init=/root/gem5_init.sh" command in the gem5 python > >>> script in order to bypass the systemd services. > >>> > >>> Please let me know when your new disk image is available! > >>> > >>> Thanks! > >>> > >>> Best regards, > >>> Nikos > >>> > >>> > >>> Quoting Bobby Bruce <bbr...@ucdavis.edu>: > >>> > >>> > Hey Nikos, > >>> > > >>> > First, you can set your own kernel arguments via the `kernel_args` > >>> > parameter in the `set_kernel_disk_worload` function to do this sort > of > >>> > thing, there's no need to modify the source. You can do something > like > >>> this: > >>> > > >>> > ``` > >>> > board.set_kernel_disk_workload( > >>> > kernel=Resource( > >>> > "riscv-bootloader-vmlinux-5.10", > >>> > ), > >>> > disk_image=Resource( > >>> > "riscv-ubuntu-20.04-img", > >>> > ), > >>> > kernel_args=get_default_kernel_args() + > >>> ["init=/root/gem5_init.sh'"], > >>> > ) > >>> > ``` > >>> > > >>> > Anyway, to answer your question: It looks like you made some error > when > >>> > creating your disk image and set things up in a read-only partition. > >>> That'd > >>> > be my best guess at this point. You should try to ensure you setup > the > >>> > partitions correctly in the disk image. Given I don't know how you > >>> created > >>> > this new image, I can't help much further. > >>> > > >>> > We should have a new RISCV disk image available by the end of today > (it > >>> > took as a bit longer than expected). It still takes some time to > boot, > >>> but > >>> > it's more stable than the one we currently provide. > >>> > > >>> > Out of curiosity, how did you remove your systemd processes? How are > you > >>> > building this disk image? With what OS are you booting? > >>> > > >>> > Kind regards, > >>> > Bobby > >>> > -- > >>> > Dr. Bobby R. Bruce > >>> > Room 3050, > >>> > Kemper Hall, UC Davis > >>> > Davis, > >>> > CA, 95616 > >>> > > >>> > web: https://www.bobbybruce.net > >>> > > >>> > > >>> > On Mon, Mar 14, 2022 at 4:04 AM Νικόλαος Ταμπουρατζής < > >>> > ntampourat...@ece.auth.gr> wrote: > >>> >> > >>> >> Dear all, Bobby and Hoa, > >>> >> > >>> >> I add this command (self.workload.command_line += ' > >>> >> init=/root/gem5_init.sh') in 169 line of > >>> >> gem5/src/python/gem5/components/boards/kernel_disk_workload.py and I > >>> >> build the gem5. Using this command, the gem5 is able to boot after > 10 > >>> >> minutes (without a large number of systemd services). However, when > it > >>> >> boots and read the gem5_init.sh, I get the following:"cannot create > >>> >> /tmp/script: Read-only file system". And of course, nothing can be > >>> >> written in the filesystem. How can I resolve this? > >>> >> > >>> >> Thank you in advance!!! > >>> >> > >>> >> Best regards, > >>> >> Nikos > >>> >> > >>> >> > >>> >> Quoting Νικόλαος Ταμπουρατζής via gem5-users <gem5-users@gem5.org>: > >>> >> > >>> >> > Dear Bobby and Hoa, > >>> >> > > >>> >> > Thank you for your advice! It is working properly using the > >>> >> > CustomDiskImageResource (including the following command: from > >>> >> > gem5.resources.resource import Resource, CustomDiskImageResource). > >>> >> > > >>> >> > Is there any news about booting faster of > `riscv-ubuntu-20.04-img`? > >>> >> > I am able to emulate the image using qemu > >>> >> > (http://resources.gem5.org/resources/riscv-ubuntu), but I do not > >>> >> > know what services I need to disable in order to boot faster the > >>> >> > image! > >>> >> > > >>> >> > Best regards, > >>> >> > Nikolaos Tampouratzis > >>> >> > > >>> >> > > >>> >> > Quoting Bobby Bruce via gem5-users <gem5-users@gem5.org>: > >>> >> > > >>> >> >> Hey Nikos, > >>> >> >> > >>> >> >> I'm not sure I know exactly how to remove all these annoying > systemd > >>> >> >> services. Currently Hoa is assigned this task: > >>> >> >> https://gem5.atlassian.net/browse/GEM5-1177 > >>> >> >> > >>> >> >> @Hoa can you make this a top priority for you? I think 6+ hours > for > >>> a > >>> > boot > >>> >> >> is a bit too much. I'm sure there must be a way to modify this > disk > >>> > image > >>> >> >> to make it faster. > >>> >> >> > >>> >> >> To answer your second question, this should work: > >>> >> >> > >>> >> >> ``` > >>> >> >> > >>> >> >> image = CustomDiskImageResource( > >>> >> >> local_path = "path/to/your/disk/image/here", > >>> >> >> disk_root_partition = "1", # This is the partition in the disk > >>> > image to > >>> >> >> use. 'None' if there is no disk image > >>> >> >> ) > >>> >> >> > >>> >> >> board.set_kernel_disk_workload( > >>> >> >> kernel = Resource("riscv-bootloader-vmlinux-5.10"), > >>> >> >> disk_image = image, > >>> >> >> ) > >>> >> >> > >>> >> >> ``` > >>> >> >> > >>> >> >> > >>> >> >> > >>> >> >> Dr. Bobby R. Bruce > >>> >> >> Room 3050, > >>> >> >> Kemper Hall, UC Davis > >>> >> >> Davis, > >>> >> >> CA, 95616 > >>> >> >> > >>> >> >> web: https://www.bobbybruce.net > >>> >> >> > >>> >> >> > >>> >> >> On Sat, Feb 12, 2022 at 7:19 AM Νικόλαος Ταμπουρατζής via > >>> gem5-users < > >>> >> >> gem5-users@gem5.org> wrote: > >>> >> >> > >>> >> >>> Dear all, > >>> >> >>> > >>> >> >>> I have successfully emulated the riscv-ubuntu.img through qemu! > The > >>> >> >>> problem was that I use Ubuntu 20.04 and it requires the > Hirsute’s > >>> >> >>> version of u-boot-qemu (wget > >>> >> >>> > >>> >> >>> > >>> > > >>> > http://mirrors.kernel.org/ubuntu/pool/main/u/u-boot/u-boot-qemu_2021.01+dfsg-3ubuntu9_all.deb > >>> > ) > >>> >> >>> and not the standard through the apt > >>> >> >>> install. > >>> >> >>> > >>> >> >>> Now I have two questions: > >>> >> >>> > >>> >> >>> 1) How can I disable the huge number of services in order to > >>> speedup > >>> >> >>> the gem5 boot process through qemu? > >>> >> >>> > >>> >> >>> 2) When I execute the following: "./build/RISCV/gem5.opt > >>> >> >>> configs/example/gem5_library/riscv-ubuntu-run.py", it downloads > >>> >> >>> automatically the riscv-ubuntu-20.04-img. How can I set another > >>> image? > >>> >> >>> The --disk-image option is not working. > >>> >> >>> > >>> >> >>> > >>> >> >>> Thank you in advance!!! > >>> >> >>> Best regards, > >>> >> >>> Nikos > >>> >> >>> > >>> >> >>> > >>> >> >>> Quoting Νικόλαος Ταμπουρατζής via gem5-users < > gem5-users@gem5.org > >>> >: > >>> >> >>> > >>> >> >>>> Dear Hoa, > >>> >> >>>> > >>> >> >>>> Thank you very much for your information! I try to emulate the > >>> >> >>>> ubuntu-image through qemu (following this tutorial: > >>> >> >>>> http://resources.gem5.org/resources/riscv-ubuntu) and I get > the > >>> >> >>>> following TFTP error: > >>> >> >>>> > >>> >> >>>> I appreciate any help!! > >>> >> >>>> > >>> >> >>>> Best regards, > >>> >> >>>> Nikos > >>> >> >>>> > >>> >> >>>> > >>> >> >>>> cossim@cossim-virtual-machine:~/riscv-ubuntu$ > >>> >> >>>> ./qemu/build/qemu-system-riscv64 -machine virt -nographic \ > >>> >> >>>>> -m 16384 -smp 8 \ > >>> >> >>>>> -bios > /usr/lib/riscv64-linux-gnu/opensbi/generic/fw_jump.elf > >>> \ > >>> >> >>>>> -kernel /usr/lib/u-boot/qemu-riscv64_smode/uboot.elf \ > >>> >> >>>>> -device virtio-net-device,netdev=eth0 \ > >>> >> >>>>> -netdev user,id=eth0,hostfwd=tcp::5555-:22 \ > >>> >> >>>>> -drive file=ubuntu.img,format=raw,if=virtio > >>> >> >>>> > >>> >> >>>> OpenSBI v0.9 > >>> >> >>>> ____ _____ ____ _____ > >>> >> >>>> / __ \ / ____| _ \_ _| > >>> >> >>>> | | | |_ __ ___ _ __ | (___ | |_) || | > >>> >> >>>> | | | | '_ \ / _ \ '_ \ \___ \| _ < | | > >>> >> >>>> | |__| | |_) | __/ | | |____) | |_) || |_ > >>> >> >>>> \____/| .__/ \___|_| |_|_____/|____/_____| > >>> >> >>>> | | > >>> >> >>>> |_| > >>> >> >>>> > >>> >> >>>> Platform Name : riscv-virtio,qemu > >>> >> >>>> Platform Features : timer,mfdeleg > >>> >> >>>> Platform HART Count : 8 > >>> >> >>>> Firmware Base : 0x80000000 > >>> >> >>>> Firmware Size : 156 KB > >>> >> >>>> Runtime SBI Version : 0.2 > >>> >> >>>> > >>> >> >>>> Domain0 Name : root > >>> >> >>>> Domain0 Boot HART : 5 > >>> >> >>>> Domain0 HARTs : 0*,1*,2*,3*,4*,5*,6*,7* > >>> >> >>>> Domain0 Region00 : > 0x0000000080000000-0x000000008003ffff > >>> () > >>> >> >>>> Domain0 Region01 : > 0x0000000000000000-0xffffffffffffffff > >>> > (R,W,X) > >>> >> >>>> Domain0 Next Address : 0x0000000080200000 > >>> >> >>>> Domain0 Next Arg1 : 0x0000000082200000 > >>> >> >>>> Domain0 Next Mode : S-mode > >>> >> >>>> Domain0 SysReset : yes > >>> >> >>>> > >>> >> >>>> Boot HART ID : 5 > >>> >> >>>> Boot HART Domain : root > >>> >> >>>> Boot HART ISA : rv64imafdcsu > >>> >> >>>> Boot HART Features : scounteren,mcounteren,time > >>> >> >>>> Boot HART PMP Count : 16 > >>> >> >>>> Boot HART PMP Granularity : 4 > >>> >> >>>> Boot HART PMP Address Bits: 54 > >>> >> >>>> Boot HART MHPM Count : 0 > >>> >> >>>> Boot HART MHPM Count : 0 > >>> >> >>>> Boot HART MIDELEG : 0x0000000000000222 > >>> >> >>>> Boot HART MEDELEG : 0x000000000000b109 > >>> >> >>>> > >>> >> >>>> > >>> >> >>>> U-Boot 2021.01+dfsg-3ubuntu0~20.04.4 (Sep 21 2021 - 15:55:38 > >>> +0000) > >>> >> >>>> > >>> >> >>>> CPU: rv64imafdcsu > >>> >> >>>> Model: riscv-virtio,qemu > >>> >> >>>> DRAM: 16 GiB > >>> >> >>>> In: uart@10000000 > >>> >> >>>> Out: uart@10000000 > >>> >> >>>> Err: uart@10000000 > >>> >> >>>> Net: eth0: virtio-net#0 > >>> >> >>>> Hit any key to stop autoboot: 0 > >>> >> >>>> > >>> >> >>>> Device 0: 1af4 VirtIO Block Device > >>> >> >>>> Type: Hard Disk > >>> >> >>>> Capacity: 13824.0 MB = 13.5 GB (28311552 x 512) > >>> >> >>>> ... is now current device > >>> >> >>>> Scanning virtio 0:1... > >>> >> >>>> Found /boot/extlinux/extlinux.conf > >>> >> >>>> Retrieving file: /boot/extlinux/extlinux.conf > >>> >> >>>> 755 bytes read in 4 ms (183.6 KiB/s) > >>> >> >>>> U-Boot menu > >>> >> >>>> 1: Ubuntu 20.04.3 LTS 5.11.0-1017-generic > >>> >> >>>> 2: Ubuntu 20.04.3 LTS 5.11.0-1017-generic (rescue target) > >>> >> >>>> Enter choice: 1: Ubuntu 20.04.3 LTS 5.11.0-1017-generic > >>> >> >>>> Retrieving file: /boot/initrd.img-5.11.0-1017-generic > >>> >> >>>> 170008555 bytes read in 728 ms (222.7 MiB/s) > >>> >> >>>> Retrieving file: /boot/vmlinuz-5.11.0-1017-generic > >>> >> >>>> 25258496 bytes read in 148 ms (162.8 MiB/s) > >>> >> >>>> append: root=LABEL=cloudimg-rootfs ro earlycon > >>> >> >>>> Retrieving file: > >>> >> >>> /lib/firmware/5.11.0-1017-generic/device-tree/qemu-riscv.dtb > >>> >> >>>> Failed to load > >>> >> >>> '/lib/firmware/5.11.0-1017-generic/device-tree/qemu-riscv.dtb' > >>> >> >>>> Skipping l0 for failure retrieving fdt > >>> >> >>>> 2: Ubuntu 20.04.3 LTS 5.11.0-1017-generic (rescue target) > >>> >> >>>> Retrieving file: /boot/initrd.img-5.11.0-1017-generic > >>> >> >>>> 170008555 bytes read in 44 ms (3.6 GiB/s) > >>> >> >>>> Retrieving file: /boot/vmlinuz-5.11.0-1017-generic > >>> >> >>>> 25258496 bytes read in 12 ms (2 GiB/s) > >>> >> >>>> append: root=LABEL=cloudimg-rootfs ro earlycon single > >>> >> >>>> Retrieving file: > >>> >> >>> /lib/firmware/5.11.0-1017-generic/device-tree/qemu-riscv.dtb > >>> >> >>>> Failed to load > >>> >> >>> '/lib/firmware/5.11.0-1017-generic/device-tree/qemu-riscv.dtb' > >>> >> >>>> Skipping l0r for failure retrieving fdt > >>> >> >>>> SCRIPT FAILED: continuing... > >>> >> >>>> libfdt fdt_check_header(): FDT_ERR_BADMAGIC > >>> >> >>>> Scanning disk virtio-blk#8... > >>> >> >>>> ** Unrecognized filesystem type ** > >>> >> >>>> ** Unrecognized filesystem type ** > >>> >> >>>> Found 6 disks > >>> >> >>>> ** Invalid partition 21 ** > >>> >> >>>> Cannot read EFI system partition > >>> >> >>>> BootOrder not defined > >>> >> >>>> EFI boot manager: Cannot load any image > >>> >> >>>> Scanning virtio 0:f... > >>> >> >>>> ** Unable to read file / ** > >>> >> >>>> Failed to load '/' > >>> >> >>>> libfdt fdt_check_header(): FDT_ERR_BADMAGIC > >>> >> >>>> BootOrder not defined > >>> >> >>>> EFI boot manager: Cannot load any image > >>> >> >>>> scanning bus for devices... > >>> >> >>>> > >>> >> >>>> Device 0: unknown device > >>> >> >>>> BOOTP broadcast 1 > >>> >> >>>> DHCP client bound to address 10.0.2.15 (4 ms) > >>> >> >>>> Using virtio-net#0 device > >>> >> >>>> TFTP from server 10.0.2.2; our IP address is 10.0.2.15 > >>> >> >>>> Filename 'boot.scr.uimg'. > >>> >> >>>> Load address: 0x88100000 > >>> >> >>>> Loading: * > >>> >> >>>> TFTP error: 'Access violation' (2) > >>> >> >>>> Not retrying... > >>> >> >>>> BOOTP broadcast 1 > >>> >> >>>> DHCP client bound to address 10.0.2.15 (1 ms) > >>> >> >>>> Using virtio-net#0 device > >>> >> >>>> TFTP from server 10.0.2.2; our IP address is 10.0.2.15 > >>> >> >>>> Filename 'boot.scr.uimg'. > >>> >> >>>> Load address: 0x84000000 > >>> >> >>>> Loading: * > >>> >> >>>> TFTP error: 'Access violation' (2) > >>> >> >>>> Not retrying... > >>> >> >>>> => > >>> >> >>>> > >>> >> >>>> > >>> >> >>>> > >>> >> >>>> > >>> >> >>>> Quoting Hoa Nguyen via gem5-users <gem5-users@gem5.org>: > >>> >> >>>> > >>> >> >>>>> Hi, > >>> >> >>>>> > >>> >> >>>>> It also took 6+ hours to boot Linux using that disk image on > my > >>> > end, so > >>> >> >>> I > >>> >> >>>>> think it's systemd being very slow. > >>> >> >>>>> > >>> >> >>>>> By profiling systemd, I find that systemd took a lot of time > to > >>> > bring up > >>> >> >>>>> the networking service, and especially the "motd" (message of > the > >>> > day?) > >>> >> >>>>> service, which queries for updates from Ubuntu servers. > >>> >> >>>>> > >>> >> >>>>> We can turn off the motd service, which would improve the > booting > >>> > time > >>> >> >>> by a > >>> >> >>>>> lot. However, I don't really know how to turn off the network > >>> > service. > >>> >> >>>>> > >>> >> >>>>> I hope that somebody will help with the systemd stuff. > >>> >> >>>>> > >>> >> >>>>> Regards, > >>> >> >>>>> Hoa Nguyen > >>> >> >>>>> > >>> >> >>>>> On Fri, Feb 11, 2022 at 4:57 AM Νικόλαος Ταμπουρατζής via > >>> > gem5-users < > >>> >> >>>>> gem5-users@gem5.org> wrote: > >>> >> >>>>> > >>> >> >>>>>> Dear community, > >>> >> >>>>>> > >>> >> >>>>>> I have just downloaded the latest version of gem5 (v21.2.1) > and > >>> I > >>> > try > >>> >> >>>>>> to simulate the FS using the riscv-ubuntu-run.py > >>> >> >>>>>> (./build/RISCV/gem5.opt > >>> >> >>>>>> configs/example/gem5_library/riscv-ubuntu-run.py). It > downloads > >>> >> >>>>>> automatically both riscv-ubuntu-20.04-img and > >>> >> >>>>>> riscv-bootloader-vmlinux-5.10. However, after 4 hours the > >>> system is > >>> >> >>>>>> not completely booted. > >>> >> >>>>>> > >>> >> >>>>>> How many hours it is required to boot? > >>> >> >>>>>> How can I disable the systemd services from > >>> riscv-ubuntu-20.04-img? > >>> >> >>>>>> > >>> >> >>>>>> I found the following link but I cannot emulate the image > >>> through > >>> >> >>>>>> qemu: http://resources.gem5.org/resources/riscv-ubuntu > >>> >> >>>>>> > >>> >> >>>>>> Best regards, > >>> >> >>>>>> Nikos > >>> >> >>>>>> > >>> >> >>>>>> Here is the output (through m5term): > >>> >> >>>>>> > >>> >> >>>>>> ==== m5 terminal: Terminal 0 ==== > >>> >> >>>>>> [ 0.000000] Linux version 5.10.0 (hn@amarillo) > >>> >> >>>>>> (riscv64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0, > GNU > >>> ld > >>> >> >>>>>> (GNU Binutils for Ubuntu) 2.30) #1 SMP Mon Jul 19 13:32:59 > PDT > >>> 2021 > >>> >> >>>>>> [ 0.000000] OF: fdt: Ignoring memory range 0x80000000 - > >>> > 0x80200000 > >>> >> >>>>>> [ 0.000000] efi: UEFI not found. > >>> >> >>>>>> [ 0.000000] Zone ranges: > >>> >> >>>>>> [ 0.000000] DMA32 [mem > >>> > 0x0000000080200000-0x00000000ffffffff] > >>> >> >>>>>> [ 0.000000] Normal [mem > >>> > 0x0000000100000000-0x000000013fffffff] > >>> >> >>>>>> [ 0.000000] Movable zone start for each node > >>> >> >>>>>> [ 0.000000] Early memory node ranges > >>> >> >>>>>> [ 0.000000] node 0: [mem > >>> > 0x0000000080200000-0x000000013fffffff] > >>> >> >>>>>> [ 0.000000] Initmem setup node 0 [mem > >>> >> >>>>>> 0x0000000080200000-0x000000013fffffff] > >>> >> >>>>>> [ 0.000000] software IO TLB: mapped [mem > >>> >> >>>>>> 0x00000000fbfff000-0x00000000fffff000] (64MB) > >>> >> >>>>>> [ 0.000000] SBI specification v0.1 detected > >>> >> >>>>>> [ 0.000000] riscv: ISA extensions acdfim > >>> >> >>>>>> [ 0.000000] riscv: ELF capabilities acdfim > >>> >> >>>>>> [ 0.000000] percpu: Embedded 16 pages/cpu s26200 r8192 > d31144 > >>> > u65536 > >>> >> >>>>>> [ 0.000000] Built 1 zonelists, mobility grouping on. > Total > >>> > pages: > >>> >> >>>>>> 775175 > >>> >> >>>>>> [ 0.000000] Kernel command line: console=ttyS0 > >>> root=/dev/vda1 ro > >>> >> >>>>>> [ 0.000000] Dentry cache hash table entries: 524288 > (order: > >>> 10, > >>> >> >>>>>> 4194304 bytes, linear) > >>> >> >>>>>> [ 0.000000] Inode-cache hash table entries: 262144 > (order: 9, > >>> >> >>>>>> 2097152 bytes, linear) > >>> >> >>>>>> [ 0.000000] Sorting __ex_table... > >>> >> >>>>>> [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap > >>> > free:off > >>> >> >>>>>> [ 0.000000] Memory: 3014996K/3143680K available (5866K > kernel > >>> > code, > >>> >> >>>>>> 3086K rwdata, 2048K rodata, 189K init, 341K bss, 128684K > >>> reserved, > >>> > 0K > >>> >> >>>>>> cma-reserved) > >>> >> >>>>>> [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, > >>> CPUs=2, > >>> >> >>> Nodes=1 > >>> >> >>>>>> [ 0.000000] rcu: Hierarchical RCU implementation. > >>> >> >>>>>> [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 > to > >>> >> >>>>>> nr_cpu_ids=2. > >>> >> >>>>>> [ 0.000000] Tracing variant of Tasks RCU enabled. > >>> >> >>>>>> [ 0.000000] rcu: RCU calculated value of > scheduler-enlistment > >>> > delay > >>> >> >>>>>> is 25 jiffies. > >>> >> >>>>>> [ 0.000000] rcu: Adjusting geometry for > rcu_fanout_leaf=16, > >>> >> >>> nr_cpu_ids=2 > >>> >> >>>>>> [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 > >>> >> >>>>>> [ 0.000000] riscv-intc: 64 local interrupts mapped > >>> >> >>>>>> [ 0.000000] plic: plic@c000000: mapped 10 interrupts > with 2 > >>> >> >>>>>> handlers for 4 contexts. > >>> >> >>>>>> [ 0.000000] random: get_random_bytes called from > >>> >> >>>>>> start_kernel+0x316/0x496 with crng_init=0 > >>> >> >>>>>> [ 0.000000] riscv_timer_init_dt: Registering clocksource > >>> cpuid > >>> > [0] > >>> >> >>>>>> hartid [1] > >>> >> >>>>>> [ 0.000000] clocksource: riscv_clocksource: mask: > >>> >> >>>>>> 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: > >>> > 440795202120 > >>> >> >>> ns > >>> >> >>>>>> [ 0.000014] sched_clock: 64 bits at 10MHz, resolution > 100ns, > >>> > wraps > >>> >> >>>>>> every 4398046511100ns > >>> >> >>>>>> [ 0.000269] Console: colour dummy device 80x25 > >>> >> >>>>>> [ 0.000322] Calibrating delay loop (skipped), value > >>> calculated > >>> >> >>>>>> using timer frequency.. 20.00 BogoMIPS (lpj=40000) > >>> >> >>>>>> [ 0.000363] pid_max: default: 32768 minimum: 301 > >>> >> >>>>>> [ 0.000710] Mount-cache hash table entries: 8192 (order: > 4, > >>> > 65536 > >>> >> >>>>>> bytes, linear) > >>> >> >>>>>> [ 0.000776] Mountpoint-cache hash table entries: 8192 > >>> (order: 4, > >>> >> >>>>>> 65536 bytes, linear) > >>> >> >>>>>> [ 0.002680] rcu: Hierarchical SRCU implementation. > >>> >> >>>>>> [ 0.002885] EFI services will not be available. > >>> >> >>>>>> [ 0.003051] smp: Bringing up secondary CPUs ... > >>> >> >>>>>> [ 0.003724] smp: Brought up 1 node, 2 CPUs > >>> >> >>>>>> [ 0.004415] devtmpfs: initialized > >>> >> >>>>>> [ 0.006194] clocksource: jiffies: mask: 0xffffffff > >>> max_cycles: > >>> >> >>>>>> 0xffffffff, max_idle_ns: 7645041785100000 ns > >>> >> >>>>>> [ 0.006230] futex hash table entries: 512 (order: 3, 32768 > >>> > bytes, > >>> >> >>>>>> linear) > >>> >> >>>>>> [ 0.006736] NET: Registered protocol family 16 > >>> >> >>>>>> [ 0.030604] vgaarb: loaded > >>> >> >>>>>> [ 0.031121] SCSI subsystem initialized > >>> >> >>>>>> [ 0.031625] usbcore: registered new interface driver usbfs > >>> >> >>>>>> [ 0.031716] usbcore: registered new interface driver hub > >>> >> >>>>>> [ 0.031801] usbcore: registered new device driver usb > >>> >> >>>>>> [ 0.033017] clocksource: Switched to clocksource > >>> > riscv_clocksource > >>> >> >>>>>> [ 0.042536] NET: Registered protocol family 2 > >>> >> >>>>>> [ 0.043824] tcp_listen_portaddr_hash hash table entries: > 2048 > >>> >> >>>>>> (order: 3, 32768 bytes, linear) > >>> >> >>>>>> [ 0.043977] TCP established hash table entries: 32768 > >>> (order: 6, > >>> >> >>>>>> 262144 bytes, linear) > >>> >> >>>>>> [ 0.045452] TCP bind hash table entries: 32768 (order: 7, > >>> 524288 > >>> >> >>>>>> bytes, linear) > >>> >> >>>>>> [ 0.047006] TCP: Hash tables configured (established 32768 > >>> bind > >>> >> >>> 32768) > >>> >> >>>>>> [ 0.047159] UDP hash table entries: 2048 (order: 4, 65536 > >>> bytes, > >>> >> >>> linear) > >>> >> >>>>>> [ 0.047434] UDP-Lite hash table entries: 2048 (order: 4, > >>> 65536 > >>> >> >>>>>> bytes, linear) > >>> >> >>>>>> [ 0.047867] NET: Registered protocol family 1 > >>> >> >>>>>> [ 0.048364] RPC: Registered named UNIX socket transport > >>> module. > >>> >> >>>>>> [ 0.048386] RPC: Registered udp transport module. > >>> >> >>>>>> [ 0.048407] RPC: Registered tcp transport module. > >>> >> >>>>>> [ 0.048430] RPC: Registered tcp NFSv4.1 backchannel > transport > >>> >> >>> module. > >>> >> >>>>>> [ 0.048455] PCI: CLS 0 bytes, default 64 > >>> >> >>>>>> [ 0.049441] workingset: timestamp_bits=62 max_order=20 > >>> >> >>> bucket_order=0 > >>> >> >>>>>> [ 0.065711] NFS: Registering the id_resolver key type > >>> >> >>>>>> [ 0.065789] Key type id_resolver registered > >>> >> >>>>>> [ 0.065809] Key type id_legacy registered > >>> >> >>>>>> [ 0.066012] nfs4filelayout_init: NFSv4 File Layout Driver > >>> >> >>> Registering... > >>> >> >>>>>> [ 0.066503] NET: Registered protocol family 38 > >>> >> >>>>>> [ 0.066560] Block layer SCSI generic (bsg) driver version > 0.4 > >>> >> >>>>>> loaded (major 254) > >>> >> >>>>>> [ 0.066583] io scheduler mq-deadline registered > >>> >> >>>>>> [ 0.066604] io scheduler kyber registered > >>> >> >>>>>> [ 0.123474] Serial: 8250/16550 driver, 4 ports, IRQ > sharing > >>> > disabled > >>> >> >>>>>> [ 0.125216] printk: console [ttyS0] disabled > >>> >> >>>>>> [ 0.125267] 10000000.uart: ttyS0 at MMIO 0x10000000 (irq > = 1, > >>> >> >>>>>> base_baud = 230400) is a 8250 > >>> >> >>>>>> [ 0.128120] printk: console [ttyS0] enabled > >>> >> >>>>>> [ 0.128546] [drm] radeon kernel modesetting enabled. > >>> >> >>>>>> [ 0.136743] loop: module loaded > >>> >> >>>>>> [ 0.137115] virtio_blk virtio0: [vda] 28311552 512-byte > >>> logical > >>> >> >>>>>> blocks (14.5 GB/13.5 GiB) > >>> >> >>>>>> [ 0.137180] vda: detected capacity change from 0 to > >>> 14495514624 > >>> >> >>>>>> [ 0.141193] vda: vda1 vda12 vda13 vda14 vda15 > >>> >> >>>>>> [ 0.143968] libphy: Fixed MDIO Bus: probed > >>> >> >>>>>> [ 0.145274] ehci_hcd: USB 2.0 'Enhanced' Host Controller > >>> (EHCI) > >>> >> >>> Driver > >>> >> >>>>>> [ 0.145323] ehci-pci: EHCI PCI platform driver > >>> >> >>>>>> [ 0.145415] ehci-platform: EHCI generic platform driver > >>> >> >>>>>> [ 0.145522] ohci_hcd: USB 1.1 'Open' Host Controller > (OHCI) > >>> > Driver > >>> >> >>>>>> [ 0.145569] ohci-pci: OHCI PCI platform driver > >>> >> >>>>>> [ 0.145661] ohci-platform: OHCI generic platform driver > >>> >> >>>>>> [ 0.146095] usbcore: registered new interface driver uas > >>> >> >>>>>> [ 0.146215] usbcore: registered new interface driver > >>> usb-storage > >>> >> >>>>>> [ 0.146407] mousedev: PS/2 mouse device common for all > mice > >>> >> >>>>>> [ 0.146782] usbcore: registered new interface driver > usbhid > >>> >> >>>>>> [ 0.146824] usbhid: USB HID core driver > >>> >> >>>>>> [ 0.148347] NET: Registered protocol family 10 > >>> >> >>>>>> [ 0.149582] Segment Routing with IPv6 > >>> >> >>>>>> [ 0.149730] sit: IPv6, IPv4 and MPLS over IPv4 tunneling > >>> driver > >>> >> >>>>>> [ 0.150694] NET: Registered protocol family 17 > >>> >> >>>>>> [ 0.150832] Key type dns_resolver registered > >>> >> >>>>>> [ 0.154215] EXT4-fs (vda1): INFO: recovery required on > >>> readonly > >>> >> >>>>>> filesystem > >>> >> >>>>>> [ 0.154269] EXT4-fs (vda1): write access will be enabled > >>> during > >>> >> >>> recovery > >>> >> >>>>>> [ 0.243877] EXT4-fs (vda1): recovery complete > >>> >> >>>>>> [ 0.244090] EXT4-fs (vda1): mounted filesystem with > ordered > >>> data > >>> >> >>>>>> mode. Opts: (null) > >>> >> >>>>>> [ 0.244181] VFS: Mounted root (ext4 filesystem) readonly > on > >>> > device > >>> >> >>>>>> 254:1. > >>> >> >>>>>> [ 0.244469] devtmpfs: mounted > >>> >> >>>>>> [ 0.244648] Freeing unused kernel memory: 188K > >>> >> >>>>>> [ 0.245022] Run /sbin/init as init process > >>> >> >>>>>> > >>> >> >>>>>> [ 0.311595] systemd[1]: System time before build time, > >>> advancing > >>> >> >>> clock. > >>> >> >>>>>> [ 0.319136] random: fast init done > >>> >> >>>>>> [ 0.339740] systemd[1]: systemd 245.4-4ubuntu3.13 running > in > >>> > system > >>> >> >>>>>> mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT > >>> +UTMP > >>> >> >>>>>> +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID > >>> > +ELFUTILS > >>> >> >>>>>> +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) > >>> >> >>>>>> [ 0.340109] systemd[1]: Detected architecture riscv64. > >>> >> >>>>>> > >>> >> >>>>>> Welcome to Ubuntu 20.04.3 LTS! > >>> >> >>>>>> > >>> >> >>>>>> [ 0.342577] systemd[1]: Set hostname to <ubuntu>. > >>> >> >>>>>> [ 0.629637] random: lvmconfig: uninitialized urandom read > (4 > >>> > bytes > >>> >> >>> read) > >>> >> >>>>>> [ 1.914376] random: systemd: uninitialized urandom read > (16 > >>> > bytes > >>> >> >>> read) > >>> >> >>>>>> [ 1.916631] systemd[1]: Created slice > system-modprobe.slice. > >>> >> >>>>>> [ OK ] Created slice system-modprobe.slice. > >>> >> >>>>>> [ 1.917793] random: systemd: uninitialized urandom read > (16 > >>> > bytes > >>> >> >>> read) > >>> >> >>>>>> [ 1.918768] systemd[1]: Created slice > >>> > system-serial\x2dgetty.slice. > >>> >> >>>>>> [ OK ] Created slice system-serial\x2dgetty.slice. > >>> >> >>>>>> [ 1.919825] random: systemd: uninitialized urandom read > (16 > >>> > bytes > >>> >> >>> read) > >>> >> >>>>>> [ 1.920817] systemd[1]: Created slice > >>> > system-systemd\x2dfsck.slice. > >>> >> >>>>>> [ OK ] Created slice system-systemd\x2dfsck.slice. > >>> >> >>>>>> [ 1.922613] systemd[1]: Created slice User and Session > Slice. > >>> >> >>>>>> [ OK ] Created slice User and Session Slice. > >>> >> >>>>>> [ 1.924053] systemd[1]: Started Forward Password Requests > to > >>> > Wall > >>> >> >>>>>> Directory Watch. > >>> >> >>>>>> [ OK ] Started Forward Password R…uests to Wall Directory > >>> Watch. > >>> >> >>>>>> [ 1.925642] systemd[1]: Condition check resulted in > Arbitrary > >>> >> >>>>>> Executable File Formats File System Automount Point being > >>> skipped. > >>> >> >>>>>> [ 1.926437] systemd[1]: Reached target User and Group Name > >>> > Lookups. > >>> >> >>>>>> [ OK ] Reached target User and Group Name Lookups. > >>> >> >>>>>> [ 1.927723] systemd[1]: Reached target Slices. > >>> >> >>>>>> [ OK ] Reached target Slices. > >>> >> >>>>>> [ 1.928838] systemd[1]: Reached target Swap. > >>> >> >>>>>> [ OK ] Reached target Swap. > >>> >> >>>>>> [ 1.930581] systemd[1]: Listening on Device-mapper event > >>> daemon > >>> >> >>> FIFOs. > >>> >> >>>>>> [ OK ] Listening on Device-mapper event daemon FIFOs. > >>> >> >>>>>> [ 1.932305] systemd[1]: Listening on LVM2 poll daemon > socket. > >>> >> >>>>>> [ OK ] Listening on LVM2 poll daemon socket. > >>> >> >>>>>> [ 1.933771] systemd[1]: Listening on multipathd control > >>> socket. > >>> >> >>>>>> [ OK ] Listening on multipathd control socket. > >>> >> >>>>>> [ 1.935386] systemd[1]: Listening on Syslog Socket. > >>> >> >>>>>> [ OK ] Listening on Syslog Socket. > >>> >> >>>>>> [ 1.937105] systemd[1]: Listening on fsck to fsckd > >>> communication > >>> >> >>> Socket. > >>> >> >>>>>> [ OK ] Listening on fsck to fsckd communication Socket. > >>> >> >>>>>> [ 1.938542] systemd[1]: Listening on initctl Compatibility > >>> Named > >>> >> >>> Pipe. > >>> >> >>>>>> [ OK ] Listening on initctl Compatibility Named Pipe. > >>> >> >>>>>> [ 1.948553] systemd[1]: Condition check resulted in > Journal > >>> > Audit > >>> >> >>>>>> Socket being skipped. > >>> >> >>>>>> [ 1.949458] systemd[1]: Listening on Journal Socket > >>> (/dev/log). > >>> >> >>>>>> [ OK ] Listening on Journal Socket (/dev/log). > >>> >> >>>>>> [ 1.951257] systemd[1]: Listening on Journal Socket. > >>> >> >>>>>> [ OK ] Listening on Journal Socket. > >>> >> >>>>>> [ 1.953548] systemd[1]: Listening on Network Service > Netlink > >>> > Socket. > >>> >> >>>>>> [ OK ] Listening on Network Service Netlink Socket. > >>> >> >>>>>> [ 1.955258] systemd[1]: Listening on udev Control Socket. > >>> >> >>>>>> [ OK ] Listening on udev Control Socket. > >>> >> >>>>>> [ 1.956745] systemd[1]: Listening on udev Kernel Socket. > >>> >> >>>>>> [ OK ] Listening on udev Kernel Socket. > >>> >> >>>>>> [ 1.958904] systemd[1]: Condition check resulted in Huge > >>> Pages > >>> > File > >>> >> >>>>>> System being skipped. > >>> >> >>>>>> [ 1.962932] systemd[1]: Mounting POSIX Message Queue File > >>> > System... > >>> >> >>>>>> Mounting POSIX Message Queue File System... > >>> >> >>>>>> [ 1.965016] systemd[1]: Condition check resulted in Kernel > >>> Debug > >>> >> >>>>>> File System being skipped. > >>> >> >>>>>> [ 1.966057] systemd[1]: Condition check resulted in Kernel > >>> Trace > >>> >> >>>>>> File System being skipped. > >>> >> >>>>>> [ 1.971879] systemd[1]: Starting Journal Service... > >>> >> >>>>>> Starting Journal Service... > >>> >> >>>>>> [ 1.978118] systemd[1]: Starting Set the console keyboard > >>> > layout... > >>> >> >>>>>> Starting Set the console keyboard layout... > >>> >> >>>>>> [ 1.979297] systemd[1]: Condition check resulted in Create > >>> list > >>> > of > >>> >> >>>>>> static device nodes for the current kernel being skipped. > >>> >> >>>>>> [ 1.983066] systemd[1]: Starting Monitoring of LVM2 > mirrors, > >>> >> >>>>>> snapshots etc. using dmeventd or progress polling... > >>> >> >>>>>> Starting Monitoring of LVM…meventd or progress > >>> polling... > >>> >> >>>>>> [ 1.984562] systemd[1]: Condition check resulted in Load > >>> Kernel > >>> >> >>>>>> Module drm being skipped. > >>> >> >>>>>> [ 1.985098] systemd[1]: Condition check resulted in > >>> OpenVSwitch > >>> >> >>>>>> configuration for cleanup being skipped. > >>> >> >>>>>> [ 1.987314] systemd[1]: Condition check resulted in Set Up > >>> >> >>>>>> Additional Binary Formats being skipped. > >>> >> >>>>>> [ 1.991069] systemd[1]: Starting File System Check on Root > >>> > Device... > >>> >> >>>>>> Starting File System Check on Root Device... > >>> >> >>>>>> [ 2.001958] systemd[1]: Starting Load Kernel Modules... > >>> >> >>>>>> Starting Load Kernel Modules... > >>> >> >>>>>> [ 2.013850] systemd[1]: Starting udev Coldplug all > Devices... > >>> >> >>>>>> Starting udev Coldplug all Devices... > >>> >> >>>>>> [ 2.036294] systemd[1]: Starting Uncomplicated firewall... > >>> >> >>>>>> Starting Uncomplicated firewall... > >>> >> >>>>>> [ 2.077993] systemd[1]: Mounted POSIX Message Queue File > >>> System. > >>> >> >>>>>> [ OK ] Mounted POSIX Message Queue File System. > >>> >> >>>>>> [ 2.094648] systemd[1]: Finished Uncomplicated firewall. > >>> >> >>>>>> [ OK ] Finished Uncomplicated firewall. > >>> >> >>>>>> [ 2.126801] systemd[1]: Finished Load Kernel Modules. > >>> >> >>>>>> [ OK ] Finished Load Kernel Modules. > >>> >> >>>>>> [ 2.129153] systemd[1]: Condition check resulted in FUSE > >>> Control > >>> >> >>>>>> File System being skipped. > >>> >> >>>>>> [ 2.129982] systemd[1]: Condition check resulted in Kernel > >>> >> >>>>>> Configuration File System being skipped. > >>> >> >>>>>> [ 2.137942] systemd[1]: Started File System Check Daemon > to > >>> > report > >>> >> >>>>>> status. > >>> >> >>>>>> [ OK ] Started File System Check Daemon to report status. > >>> >> >>>>>> [ 2.154265] systemd[1]: Starting Apply Kernel Variables... > >>> >> >>>>>> Starting Apply Kernel Variables... > >>> >> >>>>>> [ 2.247083] systemd[1]: Finished File System Check on Root > >>> > Device. > >>> >> >>>>>> [ OK ] Finished File System Check on Root Device. > >>> >> >>>>>> [ 2.251803] systemd[1]: Starting Remount Root and Kernel > File > >>> >> >>> Systems... > >>> >> >>>>>> Starting Remount Root and Kernel File Systems... > >>> >> >>>>>> [ OK ] Finished Apply Kernel Variables. > >>> >> >>>>>> [ OK ] Finished Remount Root and Kernel File Systems. > >>> >> >>>>>> [ OK ] Started Journal Service. > >>> >> >>>>>> Starting Flush Journal to Persistent Storage... > >>> >> >>>>>> Starting Load/Save Random Seed... > >>> >> >>>>>> Starting Create System Users... > >>> >> >>>>>> [ OK ] Finished Create System Users. > >>> >> >>>>>> Starting Create Static Device Nodes in /dev... > >>> >> >>>>>> [ OK ] Finished Flush Journal to Persistent Storage. > >>> >> >>>>>> [ OK ] Finished Create Static Device Nodes in /dev. > >>> >> >>>>>> Starting udev Kernel Device Manager... > >>> >> >>>>>> [ OK ] Started udev Kernel Device Manager. > >>> >> >>>>>> Starting Network Service... > >>> >> >>>>>> [ OK ] Finished udev Coldplug all Devices. > >>> >> >>>>>> Starting udev Wait for Complete Device > >>> Initialization... > >>> >> >>>>>> [ OK ] Found device /dev/ttyS0. > >>> >> >>>>>> [ OK ] Found device /dev/hvc0. > >>> >> >>>>>> [ OK ] Finished Monitoring of LVM… dmeventd or progress > >>> polling. > >>> >> >>>>>> [ OK ] Finished Set the console keyboard layout. > >>> >> >>>>>> [ OK ] Started Network Service. > >>> >> >>>>>> [ OK ] Found device /dev/disk/by-label/UEFI. > >>> >> >>>>>> [ OK ] Finished udev Wait for Complete Device > Initialization. > >>> >> >>>>>> Starting Device-Mapper Multipath Device > Controller... > >>> >> >>>>>> [ OK ] Started Dispatch Password …ts to Console Directory > >>> Watch. > >>> >> >>>>>> [ OK ] Reached target Local Encrypted Volumes. > >>> >> >>>>>> Starting Wait for Network to be Configured... > >>> >> >>>>>> [ OK ] Finished Wait for Network to be Configured. > >>> >> >>>>>> [FAILED] Failed to start Device-Map…r Multipath Device > >>> Controller. > >>> >> >>>>>> See 'systemctl status multipathd.service' for details. > >>> >> >>>>>> [ OK ] Reached target Local File Systems (Pre). > >>> >> >>>>>> Starting File System Check on > >>> /dev/disk/by-label/UEFI... > >>> >> >>>>>> [ OK ] Finished File System Check on > /dev/disk/by-label/UEFI. > >>> >> >>>>>> Mounting /boot/efi... > >>> >> >>>>>> [ 11.496946] FAT-fs (vda15): codepage cp437 not found > >>> >> >>>>>> [FAILED] Failed to mount /boot/efi. > >>> >> >>>>>> See 'systemctl status boot-efi.mount' for details. > >>> >> >>>>>> [DEPEND] Dependency failed for Local File Systems. > >>> >> >>>>>> Starting Set console font and keymap... > >>> >> >>>>>> Starting Create final runt…dir for shutdown pivot > >>> root... > >>> >> >>>>>> Starting Tell Plymouth To Write Out Runtime Data... > >>> >> >>>>>> Starting Create Volatile Files and Directories... > >>> >> >>>>>> [ OK ] Finished Create final runt…e dir for shutdown pivot > >>> root. > >>> >> >>>>>> [ OK ] Finished Set console font and keymap. > >>> >> >>>>>> [ OK ] Finished Tell Plymouth To Write Out Runtime Data. > >>> >> >>>>>> [ OK ] Finished Create Volatile Files and Directories. > >>> >> >>>>>> Starting Network Name Resolution... > >>> >> >>>>>> Starting Network Time Synchronization... > >>> >> >>>>>> Starting Update UTMP about System Boot/Shutdown... > >>> >> >>>>>> [ OK ] Finished Update UTMP about System Boot/Shutdown. > >>> >> >>>>>> [ OK ] Started Network Time Synchronization. > >>> >> >>>>>> [ OK ] Reached target System Initialization. > >>> >> >>>>>> [ OK ] Started Daily Cleanup of Temporary Directories. > >>> >> >>>>>> [ OK ] Reached target Paths. > >>> >> >>>>>> [ OK ] Reached target System Time Set. > >>> >> >>>>>> [ OK ] Reached target System Time Synchronized. > >>> >> >>>>>> [ OK ] Started Daily apt download activities. > >>> >> >>>>>> [ OK ] Started Daily apt upgrade and clean activities. > >>> >> >>>>>> [ OK ] Started Periodic ext4 Onli…ata Check for All > >>> Filesystems. > >>> >> >>>>>> [ OK ] Started Discard unused blocks once a week. > >>> >> >>>>>> [ OK ] Started Refresh fwupd metadata regularly. > >>> >> >>>>>> [ OK ] Started Daily rotation of log files. > >>> >> >>>>>> [ OK ] Started Daily man-db regeneration. > >>> >> >>>>>> [ OK ] Started Message of the Day. > >>> >> >>>>>> [ OK ] Started Ubuntu Advantage update messaging. > >>> >> >>>>>> [ OK ] Reached target Timers. > >>> >> >>>>>> [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation > Socket. > >>> >> >>>>>> [ OK ] Listening on D-Bus System Message Bus Socket. > >>> >> >>>>>> [ OK ] Listening on Open-iSCSI iscsid Socket. > >>> >> >>>>>> [ OK ] Listening on UUID daemon activation socket. > >>> >> >>>>>> [ OK ] Reached target Sockets. > >>> >> >>>>>> [ OK ] Reached target Basic System. > >>> >> >>>>>> Starting Accounts Service... > >>> >> >>>>>> Starting Avahi mDNS/DNS-SD Stack... > >>> >> >>>>>> [ OK ] Started D-Bus System Message Bus. > >>> >> >>>>>> Starting Network Manager... > >>> >> >>>>>> [ OK ] Started Save initial kernel messages after boot. > >>> >> >>>>>> Starting Remove Stale Onli…t4 Metadata Check > >>> Snapshots... > >>> >> >>>>>> [ OK ] Started irqbalance daemon. > >>> >> >>>>>> Starting Dispatcher daemon for systemd-networkd... > >>> >> >>>>>> [ OK ] Started Set the CPU Frequency Scaling governor. > >>> >> >>>>>> Starting Authorization Manager... > >>> >> >>>>>> Starting Restore /etc/reso… the ppp link was shut > >>> down... > >>> >> >>>>>> Starting System Logging Service... > >>> >> >>>>>> Starting Login Service... > >>> >> >>>>>> Starting Disk Manager... > >>> >> >>>>>> Starting WPA supplicant... > >>> >> >>>>>> [ OK ] Started Network Name Resolution. > >>> >> >>>>>> [ OK ] Finished Restore /etc/reso…re the ppp link was shut > >>> down. > >>> >> >>>>>> [ OK ] Reached target Host and Network Name Lookups. > >>> >> >>>>>> [ OK ] Started System Logging Service. > >>> >> >>>>>> [ OK ] Started Avahi mDNS/DNS-SD Stack. > >>> >> >>>>>> [ OK ] Started WPA supplicant. > >>> >> >>>>>> [ OK ] Started Network Manager. > >>> >> >>>>>> [ OK ] Reached target Network. > >>> >> >>>>>> Starting Network Manager Wait Online... > >>> >> >>>>>> [ OK ] Started Authorization Manager. > >>> >> >>>>>> Starting Modem Manager... > >>> >> >>>>>> Starting Hostname Service... > >>> >> >>>>>> [ OK ] Started Login Service. > >>> >> >>>>>> [ OK ] Started Unattended Upgrades Shutdown. > >>> >> >>>>>> [ OK ] Started Accounts Service. > >>> >> >>>>>> [ OK ] Started Modem Manager. > >>> >> >>>>>> [ OK ] Started Disk Manager. > >>> >> >>>>>> [ OK ] Started Hostname Service. > >>> >> >>>>>> > >>> >> >>>>>> > >>> >> >>>>>> _______________________________________________ > >>> >> >>>>>> gem5-users mailing list -- gem5-users@gem5.org > >>> >> >>>>>> To unsubscribe send an email to gem5-users-le...@gem5.org > >>> >> >>>>>> %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s > >>> >> >>>> > >>> >> >>>> > >>> >> >>>> _______________________________________________ > >>> >> >>>> gem5-users mailing list -- gem5-users@gem5.org > >>> >> >>>> To unsubscribe send an email to gem5-users-le...@gem5.org > >>> >> >>>> %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s > >>> >> >>> > >>> >> >>> > >>> >> >>> _______________________________________________ > >>> >> >>> gem5-users mailing list -- gem5-users@gem5.org > >>> >> >>> To unsubscribe send an email to gem5-users-le...@gem5.org > >>> >> >>> %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s > >>> >> > > >>> >> > > >>> >> > _______________________________________________ > >>> >> > gem5-users mailing list -- gem5-users@gem5.org > >>> >> > To unsubscribe send an email to gem5-users-le...@gem5.org > >>> >> > %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s > >>> >> > >>> >> > >>> > >>> > >>> > >>> > > > _______________________________________________ > gem5-users mailing list -- gem5-users@gem5.org > To unsubscribe send an email to gem5-users-le...@gem5.org > %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s
_______________________________________________ gem5-users mailing list -- gem5-users@gem5.org To unsubscribe send an email to gem5-users-le...@gem5.org %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s