Hi Bala'zs,
The modified text you suggest addresses my issue.
Thanks!
Regards,
Christer
On 16/04/2020, 14.28, "Balázs Varga A" <balazs.a.va...@ericsson.com> wrote:
Hi Christer,
No, data plane specification does not cover what protocols are used by
service sub-layer and forwarding sub-layer functions.
A data plane specification specifies what headers fields are there in the
packet and how to use these header fields for a specific
purpose. For instance, in case of DetNet, what fields are used to recognize
a DetNet flow (flow ID) and how is the sequence number
encoded and used.
A possible clarification is below (text added in brackets to firs
sentence). Does it solves your concern?
OLD:
This document describes the concepts needed by any DetNet data plane
specification and provides considerations for any corresponding
implementation. It covers the building blocks that provide the
DetNet service, the DetNet service sub-layer and the DetNet
forwarding sub-layer functions as described in the DetNet
Architecture.
NEW:
This document describes the concepts needed by any DetNet data plane
specification (i.e., the DetNet-specific use of packet header fields)
and
provides considerations for any corresponding
implementation. It covers the building blocks that provide the
DetNet service, the DetNet service sub-layer and the DetNet
forwarding sub-layer functions as described in the DetNet
Architecture.
Thanks
Bala'zs
-----Original Message-----
From: Christer Holmberg <christer.holmb...@ericsson.com>
Sent: Wednesday, April 15, 2020 11:19 PM
To: Balázs Varga A <balazs.a.va...@ericsson.com>; gen-art@ietf.org
Cc: last-c...@ietf.org;
draft-ietf-detnet-data-plane-framework....@ietf.org; det...@ietf.org
Subject: Re: Genart last call review of
draft-ietf-detnet-data-plane-framework-04
Hi Bala'zs,
Thank you for the reply and clarifications. I still have a question on Q2.
...
Q2:
>> The first line of the 2nd paragraph of the Introduction says:
>>
>> “This document describes the concepts needed by any DetNet data
plane specification…”
>>
>> What is meant by DetNet data plane specification? The definition of
DetNet flows over a specific network technology? Please clarify, or reference
if already defined elsewhere.
>
> <BV> Data plane documents focuses how DetNet packets are recognized
and served according to DetNet service and forwarding sub-layer functions.
>The next sentence is intended to clarify that.
The next sentence is fine. It is just a little unclear to me what the
definition of DetNet data plane specification actually is. Is it a
specification that
defines the combination of service sub-layer using protocol X and
forwarding sub-layer using protocol Y?
Regards,
Christer
_______________________________________________
Gen-art mailing list
Gen-art@ietf.org
https://www.ietf.org/mailman/listinfo/gen-art
