Hi Nicolas,
After this "reset" command, both ports are DOWN forever, I can only get
portinfo from local port.
I am sure that the port that has been reset is not the local port,
otherwise it will prompt "node type not switch" error.
I tried to enable this switch port from another port and brought it to
POLLING state, but as long as I use "reset", both ports are DOWN.
Thanks!
Yicheng Jia
Nicolas Morey-Chaisemartin <[email protected]>
04/16/2009 12:43 AM
To
Yicheng Jia <[email protected]>
cc
[email protected]
Subject
Re: [ofa-general] link width problem of Qlogic 9024 unmanaged switch
By any chances have you not reset the port you're on?
Have you tried using another node to enable the port again?
Nicolas
Le 16/04/2009 00:45, Yicheng Jia a écrit :
>
> Hello Randy,
>
> I am trying to run "ibportstate reset" to reset the switch port on the
> other side in order to get 4x link. However I get the following error:
> ibwarn: [19660] mad_rpc: _do_madrpc failed; dport (Lid 7)
> ibportstate: iberror: failed: smp set portinfo failed
>
> And the port status change to DOWN after this. Have you ever tried to
> run "ibportstate" to reset the switch port?
>
> Thanks!
>
> Yicheng Jia
>
>
>
>
>
> ------------------------------
>
> Message: 2
> Date: Wed, 4 Mar 2009 18:39:54 -0600
> From: Randy Halverson <[email protected]>
> Subject: [ofa-general] link width problem of Qlogic 9024 unmanaged
> switch
> To: "'[email protected]'" <[email protected]>
> Message-ID:
> <[email protected]>
> Content-Type: text/plain; charset="us-ascii"
>
> Hello Yicheng,
>
> After checking internally, this appears to be a known problem with older
> firmware for the 9024FC switches.
>
> It appears that you or another person at 'tmriusa.com' has recently
> opened a case with QLogic Tech Support for this issue. Please continue
> to work with QLogic Tech Support on firmware upgrade resolution since
> you probably don't have our FastFabric Tools to manage the 9024FC
switches..
>
> Regards,
>
> Randy
> Technical Support
> QLogic Corporation
> -------------- next part --------------
>
>
>
_____________________________________________________________________________
> Scanned by IBM Email Security Management Services powered by
> MessageLabs. For more information please visit http://www.ers.ibm.com
>
_____________________________________________________________________________
> <http://www.ers.ibm.com/>
>
>
_____________________________________________________________________________
> Scanned by IBM Email Security Management Services powered by
> MessageLabs. For more information please visit http://www.ers.ibm.com
>
_____________________________________________________________________________
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> general mailing list
> [email protected]
> http://lists.openfabrics.org/cgi-bin/mailman/listinfo/general
>
> To unsubscribe, please visit
http://openib.org/mailman/listinfo/openib-general
_____________________________________________________________________________
Scanned by IBM Email Security Management Services powered by MessageLabs.
For more information please visit http://www.ers.ibm.com
_____________________________________________________________________________
_____________________________________________________________________________
Scanned by IBM Email Security Management Services powered by MessageLabs. For
more information please visit http://www.ers.ibm.com
_____________________________________________________________________________
_______________________________________________
general mailing list
[email protected]
http://lists.openfabrics.org/cgi-bin/mailman/listinfo/general
To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
