Hi Waldo, As you state that the bootloader does fine, I assume that you're getting serial output until Genode comes into play and hence the wiring can't be a problem. Normally, Uboot prints out detailed information on its version. Something like "U-Boot 2014.07-gfdaebbd-dirty (Dec 17 2014 - 15:44:12)". Could you please post this line?
Have you tried to adapt the UART driver parameters? On 22.01.2015 16:00, Waldo Paz Rodriguez wrote: > Hi Martin, thanks for yours tips, I am using the Uboot for the yse5250. > It boot fine, but when I am loading the genode binary(elf), it stays > loading the system and doesnt show nothing on the serial console. > > best regards, waldo > El 22/01/15 a las 07:07, Martin Stein escribió: >> On 22.01.2015 13:03, Martin Stein wrote: >>> My Exynos 5250 manual says that >>> uart0_base is 0x12C00000 and uart1_base is 0x12C10000 while uart0/1_clk >>> should be the same as uart3_clk but both depend on the configuration >> I mean "... same as uart2_clk ..." (the clock Genode uses currently) not >> uart3_clk. >> >> ------------------------------------------------------------------------------ >> New Year. New Location. New Benefits. New Data Center in Ashburn, VA. >> GigeNET is offering a free month of service with a new server in Ashburn. >> Choose from 2 high performing configs, both with 100TB of bandwidth. >> Higher redundancy.Lower latency.Increased capacity.Completely compliant. >> http://p.sf.net/sfu/gigenet >> _______________________________________________ >> genode-main mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/genode-main > > ------------------------------------------------------------------------------ > New Year. New Location. New Benefits. New Data Center in Ashburn, VA. > GigeNET is offering a free month of service with a new server in Ashburn. > Choose from 2 high performing configs, both with 100TB of bandwidth. > Higher redundancy.Lower latency.Increased capacity.Completely compliant. > http://p.sf.net/sfu/gigenet > _______________________________________________ > genode-main mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/genode-main ------------------------------------------------------------------------------ New Year. New Location. New Benefits. New Data Center in Ashburn, VA. GigeNET is offering a free month of service with a new server in Ashburn. Choose from 2 high performing configs, both with 100TB of bandwidth. Higher redundancy.Lower latency.Increased capacity.Completely compliant. http://p.sf.net/sfu/gigenet _______________________________________________ genode-main mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/genode-main
