Still no luck. RH and Knoppix have no problems but Gentoo just can't find these boards. I guess something is badly broken. At this point if I want a system it looks like it will have to be RH!
> built a 1.4rc2 system on a PIII dual 933 system. This is an all SCSI > system with an Adaptec 3210S raid card and an Adaptec 39160 SCSI card > running a RAID 5 array. > > When I boot it tells me > > kmod: fialde to exec /sbin/modprobe -s -k scsi_hostadapter, errno=2 > kmod: fialde to exec /sbin/modprobe -s -k scsi_hostadapter, errno=2 > > and my dpt_i2o drivers do not get loaded. > > I've used this same card successfully in a dual AMD Athlon 1.9 system and > both the livecd and the build booted. However, on this system I had to > boot using Knoppix because the livecd would not detect the 3210S card - > modprobe told me no such device. > > What does this error mean or more importantly why does Gentoo not see the > 3210S card on this system when a RH 7.3 rescue CD and Knoppix both see the > card without problems - to say nothing of the fact that the liveCD on an > AMD works. > > I built the system and used LILO as the boot loader. This system was a > clean system to start with and after I setup lilo.conf I did a /sbin/lilo. > I had a boot=/dev/sda in LILO's global and for the image section I had > /root=/dev/sda2. -- Brett I. Holcomb AKA Grunt <>< -- [EMAIL PROTECTED] mailing list
