Disabling APIC doesn't work either. The only error messages in the log are:
[dhcpcd] timed out waiting for a valid DHCP server response [rc-scripts] failed to bring eth0 up That's all I get. Any other ideas? Jason On Wed, 2003-07-30 at 03:20, Leonid Podolny wrote: > I use it with no problems at all. > Two things: > 1) Post the /var/log/messages excerpt. Maybe there is something useful > there. > 2) I had the similar problem with another card (not 3COM). I solved it by > disabling the APIC support at the kernel. > Regards, L. > > On Wed, 29 Jul 2003, Jason Giangrande wrote: > > > This seems a bit odd. I'm installing gentoo on a box that has a 3Com > > 3cSOHO100-TX network card. The card works fine when booting off the CD > > and seems to use the 3c59x module, but after the install, using the same > > module, the card does not work. I've double checked the kernel and all > > settings seem correct. I've checked the /etc/conf.d/net file and > > everything is fine there (the system is setup to use DHCP but it also > > doesn't work when I give it a static IP either). The module loads during > > boot up but the system hangs when it gets to the network card , and > > finally times out. Has anyone had any success using one of these cards > > before? I have two systems running perfectly using the 3Com 3c905C-TX > > cards with exactly the same settings. Anyone have any ideas as to what > > might be wrong? > > > > Regards, > > Jason Giangrande > > > > > > -- > > [EMAIL PROTECTED] mailing list > > > > -- > [EMAIL PROTECTED] mailing list -- [EMAIL PROTECTED] mailing list
