hi ,

sorry for crossposting but this is urgent..
I read a whole bunch of threads in the forums but none solved my
problems. I setup my dsl-connection with adsl-setup but adsl-start
will timeout..

with DEBUG="1" I get this

<snip>
r00t init.d # DEBUG="1" adsl-start
*** Running in debug mode... please be patient...
lsmod: QM_MODULES: Function not implemented

cat: /tmp/pppoe-debug-28925/pppoe-debug.txt-0: No such file or directory
</snap>

that si of course true since my kernel is monolithic. a problem? why?

other things of interest:

</etc/resolv.conf>
r00t init.d # less /etc/resolv.conf
# MADE-BY-RP-PPPOE
nameserver 217.5.115.7
nameserver 194.25.2.129
<//etc/resolv.conf>

</etc/ppp/resolv.conf>
r00t init.d # less /etc/ppp/resolv.conf
# MADE-BY-RP-PPPOE
nameserver 217.5.115.7
nameserver 194.25.2.129
<//etc/ppp/resolv.conf>

<ifconfig>
r00t init.d # ifconfig
eth0      Link encap:Ethernet  HWaddr 00:30:84:28:E3:12
          inet addr:192.168.0.10  Bcast:192.168.0.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:3457 errors:0 dropped:0 overruns:0 frame:0
          TX packets:3949 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:295882 (288.9 Kb)  TX bytes:314947 (307.5 Kb)
          Interrupt:9 Base address:0x4000

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:24 errors:0 dropped:0 overruns:0 frame:0
          TX packets:24 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:2046 (1.9 Kb)  TX bytes:2046 (1.9 Kb)

<ifconfig>


<route -n>
r00t init.d # route -n
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
192.168.0.0     0.0.0.0         255.255.255.0   U     0      0        0 eth0
127.0.0.0       127.0.0.1       255.0.0.0       UG    0      0        0 lo
<route -n>


</adsl-setup>
** Summary of what you entered **

Ethernet Interface: eth0
User name:          [EMAIL PROTECTED]
Activate-on-demand: No
DNS addresses:      Supplied by ISP's server
Firewalling:        NONE

>>> Accept these settings and adjust configuration files (y/n)? y
</adsl-setup>



I would be grateful for any help.. tia!

 
gruss
/Christian                   mailto:[EMAIL PROTECTED]

-- 
I propose that the following character sequence for joke markers:

:-)
                             19-Sep-82 11:44    Scott E  Fahlman


--
[EMAIL PROTECTED] mailing list

Reply via email to