I think this may happen if you're emerging in parallel (e.g. emerge started on
two consoles)
Stoian Ivanov wrote:
> [EMAIL PROTECTED] ~ # emerge -a foomatic-db-engine
>
> These are the packages that I would merge, in order:
>
> Calculating dependencies ...done!
> [ebuild R ] net-print/foomatic-db-engine-3.0.2
>
> Do you want me to merge these packages? [Yes/No]
>>>> emerge (1 of 1) net-print/foomatic-db-engine-3.0.2 to /
>>>> md5 files ;-) foomatic-db-engine-3.0.2.ebuild
>>>> md5 files ;-) foomatic-db-engine-3.0.0.20031018.ebuild
>>>> md5 files ;-) foomatic-db-engine-3.0.1.ebuild
>>>> md5 files ;-) foomatic-db-engine-3.0.0.ebuild
>>>> md5 files ;-) files/digest-foomatic-db-engine-3.0.0
>>>> md5 files ;-) files/digest-foomatic-db-engine-3.0.1
>>>> md5 files ;-) files/digest-foomatic-db-engine-3.0.2
>>>> md5 files ;-) files/perl-module-3.0.1.diff
>>>> md5 files ;-) files/digest-foomatic-db-engine-3.0.0.20031018
>>>> md5 files ;-) files/perl-module.diff
>>>> md5 src_uri ;-) foomatic-db-engine-3.0.2.tar.gz
>>>> Unpacking source...
>>>> Unpacking foomatic-db-engine-3.0.2.tar.gz to
>>>> /var/tmp/portage/foomatic-db-engine-3.0.2/work Source unpacked.
> * Applying perl-module-3.0.1.diff ...
>
> [ ok ]
> ./configure --prefix=/usr --host=i686-pc-linux-gnu --mandir=/usr/share/man
> --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc
> --localstatedir=/var/lib --build=i686-pc-linux-gnu creating cache
> ./config.cache checking for gcc... gcc checking whether the C compiler
> (gcc -O3 -march=athlon-xp -fomit-frame-pointer -pipe ) works... yes
> checking whether the C compiler (gcc -O3 -march=athlon-xp
> -fomit-frame-pointer -pipe ) is a cross-compiler... no checking whether we
> are using GNU C... yes checking whether gcc accepts -g... yes checking for
> a BSD compatible install... /bin/install -c checking whether ln -s
> works... yes checking whether make sets ${MAKE}... yes
> checking for xml2-config... /usr/bin/xml2-config
> checking for dirent.h that defines DIR... yes
> checking for opendir in -ldir... no
> checking how to run the C preprocessor... gcc -E
> checking for ANSI C header files... yes
> checking for working const... yes
> checking for strdup... yes
> checking for strspn... yes
> checking for strstr... yes
> checking for xmlParseFile... no
> checking for xmlCreatePushParserCtxt... no
> checking for xmlParseChunk... no
> checking for xmlFreeParserCtxt... no
> checking for xmlFreeDoc... no
> checking for xmlDocGetRootElement... no
> checking for xmlNodeListGetString... no
> checking for file... /usr/bin/file
> checking for cat... /usr/bin/cat
> checking for gs... /usr/bin/gs
> checking for a2ps... A2PS_NOT_FOUND
> checking for wget... /usr/bin/wget
> checking for curl... /usr/bin/curl
> checking for printf... /usr/bin/printf
> checking GhostScript check... no
> GS /usr/bin/gs
> checking how to redirect GhostScript output to fd 3... ACCESS DENIED
> open_wr: /dev/fd/3 ./configure: line 1763: /dev/fd/3: Permission denied
> using |/usr/bin/cat >&3
> checking for perl... /usr/bin/perl
> Checking whether Perl will find libraries installed under /usr... yes
> checking for bash... /bin/bash
> checking for lpd/... no
> checking for lp-errs... no
> checking for lpd... no
> checking for printcap... /etc/printcap
> checking for lpd.conf... no
> checking for lpr-lpd... no
> checking for lpr-lprng... no
> checking for lpr-lpr... no
> checking for lpr... /usr/bin/lpr
> checking for lpq-lpd... no
> checking for lpq-lprng... no
> checking for lpq-lpr... no
> checking for lpq... /usr/bin/lpq
> checking for lprm-lpd... no
> checking for lprm-lprng... no
> checking for lprm-lpr... no
> checking for lprm... /usr/bin/lprm
> checking for lpc-lpd... no
> checking for lpc-lprng... no
> checking for lpc-lpr... no
> checking for lpc... no
> checking for checkpc... no
> checking for cups/... /etc/cups
> checking for lpadmin... /usr/sbin/lpadmin
> checking for lpstat... /usr/bin/lpstat
> checking for cups/model/... /usr/share/cups/model
> checking for cups/filter/... /usr/lib/cups/filter
> checking for cups/backend/... /usr/lib/cups/backend
> checking for cups/printers.conf... /etc/cups/printers.conf
> checking for lpr-cups... no
> checking for lpr... /usr/bin/lpr
> checking for lpq-cups... no
> checking for lpq... /usr/bin/lpq
> checking for lprm-cups... no
> checking for lprm... /usr/bin/lprm
> checking for lpc-cups... no
> checking for lpc... no
> checking for lp-cups... no
> checking for lp... /usr/bin/lp
> checking for cancel-cups... no
> checking for cancel... /usr/bin/cancel
> checking for enable-cups... no
> checking for enable... /usr/bin/enable
> checking for disable-cups... no
> checking for disable... /usr/bin/disable
> checking for accept-cups... no
> checking for accept... no
> checking for reject-cups... no
> checking for reject... no
> checking for lpmove... no
> checking for lpoptions... /usr/bin/lpoptions
> checking for lpinfo... /usr/sbin/lpinfo
> checking for pdq/... no
> checking for pdq/printrc... no
> checking for pdq... no
> checking for lpr-pdq... no
> checking for ppr/bin/pprd... no
> checking for ppr/interfaces/... /usr/lib/ppr/interfaces
> checking for ppr/PPDFiles/... no
> checking for ppr/... no
> checking for ppr... no
> checking for lpr-ppr... no
> checking for ppad... no
> checking for ppop... no
> checking for nc... no
> checking for netcat... no
> checking for rlpr... no
> checking for smbclient... /usr/bin/smbclient
> checking for nprint... no
> checking for ptal-connect... /usr/bin/ptal-connect
> checking for ptal-printd/... no
> checking for mtink/... no
> checking for gzip... /bin/gzip
> checking for foomatic/db/source/... /usr/share/foomatic/db/source
> checking for db/source/... no
> checking for foomatic-rip... /usr/bin/foomatic-rip
> checking for foomatic-rip... no
> updating cache ./config.cache
> creating ./config.status
> creating Makefile
> creating makeDefaults
> creating makeMan
> creating foomatic-configure
> creating foomatic-printjob
> creating foomatic-kitload
> creating foomatic-ppdfile
> creating foomatic-preferred-driver
> creating foomatic-cleanupdrivers
> creating foomatic-getpjloptions
> creating foomatic-addpjloptions
> creating foomatic-compiledb
> creating foomatic-fix-xml
> creating foomatic-nonumericalids
> creating foomatic-replaceoldprinterids
> creating foomatic-ppd-options
> creating foomatic-printermap-to-gimp-print-xml
> Finished configuring.
> Type 'make' to build the package
> then 'make install' to install it.
> chmod a+rx ./makeDefaults
> ./makeDefaults
> if [ x = x--inplace ] ; then touch .testing-stamp ; fi
> ( cd lib && /usr/bin/perl Makefile.PL verbose INSTALLDIRS=site )
> ABSTRACT => q[Foomatic printer configuration library code]
> AUTHOR => q[Grant Taylor <[EMAIL PROTECTED]>]
> INSTALLDIRS => q[site]
> NAME => q[Foomatic]
> PREFIX => q[/usr]
> PREREQ_PM => { }
> Using PERL=/usr/bin/perl5.8.6
> Writing Makefile for Foomatic
> gcc -O3 -march=athlon-xp -fomit-frame-pointer -pipe -o foomatic-combo-xml
> foomatic-combo-xml.c foomatic-combo-xml.c: In function `loadidlist':
> foomatic-combo-xml.c:153: warning: assignment from incompatible pointer
> type foomatic-combo-xml.c: In function `parse':
> foomatic-combo-xml.c:1172: warning: assignment from incompatible pointer
> type foomatic-combo-xml.c:1188: warning: assignment from incompatible
> pointer type gcc -O3 -march=athlon-xp -fomit-frame-pointer -pipe
> -I/usr/include/libxml2 -L/usr/lib -lxml2 -lz -lpthread -lm -o
> foomatic-perl-data foomatic-perl-data.c foomatic-perl-data.c: In function
> `perlquote': foomatic-perl-data.c:326: warning: assignment discards
> qualifiers from pointer target type foomatic-perl-data.c:327: warning:
> assignment discards qualifiers from pointer target type chmod a+rx
> ./makeMan ./makeMan for m in foomatic-printjob foomatic-configure
> foomatic-combo-xml foomatic-perl-data foomatic-ppdfile foomatic-compiledb
> foomatic-ppd-options foomatic-kitload foomatic-getpjloptions
> foomatic-addpjloptions foomatic-preferred-driver foomatic-fix-xml
> foomatic-nonumericalids foomatic-replaceoldprinterids
> foomatic-printermap-to-gimp-print-xml; do \
> /usr/bin/perl -p -i -e "s=use lib '.*lib/';\n==s" $m; \
> done
> chmod a+rx Makefile makeDefaults makeMan foomatic-configure
> foomatic-printjob foomatic-kitload foomatic-ppdfile
> foomatic-preferred-driver foomatic-cleanupdrivers foomatic-getpjloptions
> foomatic-addpjloptions foomatic-compiledb foomatic-fix-xml
> foomatic-nonumericalids foomatic-replaceoldprinterids foomatic-ppd-options
> foomatic-printermap-to-gimp-print-xml mkinstalldirs
> --------------------------- ACCESS VIOLATION SUMMARY
> --------------------------- LOG FILE =
> "/tmp/sandbox-net-print_-_foomatic-db-engine-3.0.2-13846.log"
>
> open_wr: /dev/fd/3 (symlink to /proc/14225/fd/3)
>
--------------------------------------------------------------------------------
> [EMAIL PROTECTED] ~ #
>
>
--
gentoo-user@gentoo.org mailing list
