Nick Rout wrote:
Jamie. we seem to be following each other around the mailing lists. CLUG, mythtv, now here.
You seem to have all the modules loaded, what is not working?
is there a /dev/video/video0?
does xawtv -c /dev/video/video0 give any output?
Output of xawtv -c /dev/video0
This is xawtv-3.94, running on Linux/i686 (2.6.12-gentoo-r6)
WARNING: Your X-Server has no DGA support.
WARNING: couldn't find framebuffer base address, try manual
configuration ("v4l-conf -a <addr>")
v4l2: open /dev/video0: Permission denied
v4l2: open /dev/video0: Permission denied
v4l: open /dev/video0: Permission denied
no video grabber device available
On Tue, 19 Jul 2005 14:20:48 +1200 (NZST)
Jamie Dobbs wrote:
I've been working on this for several days but do not seem to make any
progress.
I have a Pinnacle PCTV Stereo card which is based on the Philips saa7134
chip. I have recomipled my kernel (2.6.12-gentoo-r6) to include the
saa7134 module and i2c support as a module.
lsmod output :
Module Size Used by
tda9887 13144 0
saa7134 102996 0
tuner 26920 0
video_buf 17924 1 saa7134
v4l2_common 5184 1 saa7134
v4l1_compat 14084 1 saa7134
ir_common 6660 1 saa7134
videodev 7808 1 saa7134
Relevant entries added to my /etc/modules.conf after modules-update is run:
(I am in New Zealand and know that card number and tuner number are
correct as I have had this card working in Mandrake 10.1 a week or so ago)
### modules-update: start processing /etc/modules.d/saa7134
options saa7134 card=26 tuner=5 oss=1
### modules-update: end processing /etc/modules.d/saa7134
### modules-update: start processing /etc/modules.d/tda9887
options tda9887 qss=0
### modules-update: end processing /etc/modules.d/tda9887
My Kernel .config file can be found at
http://drgnfire.orcon.net.nz/kernel_config
I'd appreciate any feedback on what I might be doing wrong that is causing
the TV Card not to work.
Once I have the card working my aim is to build a MythTV box using this
card, so any pointers on this would also be appreciated (especially from
anyone in New Zealand who has experience in this area).
Thanks
Jamie
--
gentoo-user@gentoo.org mailing list
--
gentoo-user@gentoo.org mailing list
