my NIC magically recovered :) i did nothing. i just wake up today, and turn my computer on, and it is as good as new.
On Sat, Aug 7, 2010 at 12:00 PM, William Kenworthy <bi...@iinet.net.au> wrote: > try mii-tool if its compatible with the card > > sys-apps/net-tools-1.60_p20090728014017-r1 (/sbin/mii-tool) > > Add more "-v" to its command line and you get more info including a ROM > readout. > > BillK > > > On Sat, 2010-08-07 at 10:17 +0800, Xi Shen wrote: >> normally, the latest livecd boot up the system, and everything works. >> if the livecd boot up and something is not working, i guess it must be >> a hardware issue. >> >> BTW, ifconfig -a does show my eth0 NIC, but ifconfig eth0 up cannot >> start my NIC. >> >> >> On Sat, Aug 7, 2010 at 12:01 AM, Mick <michaelkintz...@gmail.com> wrote: >> > On 6 August 2010 13:45, Xi Shen <davidshe...@googlemail.com> wrote: >> >> i reboot the system, fresh start with livcd. all reports the same error. >> >> :( >> >> >> >> i noticed that the hardware address is 3a:3a:2d:6c:3a:3a, which is >> >> obviously an invalid one. i guess it is a hardware failure... >> > >> > Hmm ... if ifconfig -a does not show your device then this merits >> > further investigation. >> > >> > Does the LiveCD have the requisite driver for your eth0? >> > >> > In your normal OS the permanent udev rules could have messed up the >> > order of your devices (assuming that you have more than one network >> > interface) so that eth1 is now eth0. >> > >> > However, I am not sure that the LiveCD would show the same problem as >> > it would run its own udev daemon. Either way, ifconfig -a should show >> > all your interfaces and MAC numbers (as long as there is the >> > appropriate driver in the kernel). >> > >> > If it is a hardware failure it may be worth trying to reseat the card >> > if separate to the MoBo, or disable/enable in the BIOS to reset it. >> > -- >> > Regards, >> > Mick >> > >> > >> >> >> > > -- > William Kenworthy <bi...@iinet.net.au> > Home in Perth! > > > -- Best Regards, Xi Shen (David) http://twitter.com/davidshen84/