Bill Longman <bill.longman <at> gmail.com> writes:
> So, there are two problems but the most serious one right now is that
> you don't have the /mnt/cdrom directory. Make it. That will solve the
> first problem.
Ok /mnt/cdrom built.
> The second is that you need to tell "mount" that the disk in your CD
> drive has an iso9660 filesystem on it so it doesn't get all confused.
> Use this command, then, to mount the disk:
> mount -t iso9660 /dev/sr0 /mnt/cdrom
Ok it says:
mount: block device /dev/sr0 is write-protected, mounting read-only
#ls -lag /dev/sr0 <returns>
brw-rw----+ 1 cdrom 11, 0 Aug 16 15:59 /dev/sr0
> Make sure you really do have a disk with stuff on it in the drive.
Yep,
Kaffeine croaks with ///dev/hda error
Dragonplayer does not show the contents of any dvd
despite a dvd being in the drive
dmesg snippets:
ide-cd: hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
sd 0:0:0:0: [sda] Attached SCSI disk
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATAPI: PLEXTOR DVDR PX-755A, 1.04, max UDMA/66
ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
ata3.00: configured for UDMA/66
scsi 2:0:0:0: CD-ROM PLEXTOR DVDR PX-755A 1.04 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg1 type 5
udev: starting version 151
hda: command error: status=0x51 { DriveReady SeekComplete Error }
hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
hda: possibly failed opcode: 0xa0
end_request: I/O error, dev hda, sector 8556800
cdrom: This disc doesn't have any tracks I recognize!
sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current]
Info fld=0x3b3a10
Buffer I/O error on device hda, logical block 512
UDF-fs: Partition marked readonly; forcing readonly mount
UDF-fs INFO UDF: Mounting volume 'DELTA_FORCE', timestamp 2001/01/11 16:54
(1f10)
sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current]
Info fld=0x3b3a10
sr 2:0:0:0: [sr0] Add. Sense: Read of scrambled sector without authentication
sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 3e 3a 1c 00 00 02 00
end_request: I/O error, dev sr0, sector 16312432
Buffer I/O error on device sr0, logical block 2039054
sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current]
Info fld=0x3b3a10
sr 2:0:0:0: [sr0] Add. Sense: Read of scrambled sector without authentication
sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 3e 3a 1c 00 00 02 00
end_request: I/O error, dev sr0, sector 16312432
Buffer I/O error on device sr0, logical block 2039054
UDF-fs: Partition marked readonly; forcing readonly mount
UDF-fs INFO UDF: Mounting volume 'TRANSFORMERS2_IMAX_DISC1', timestamp
2009/09/11 04:19 (1f10)
[drm] Setting GART location based on new memory map
[drm] Loading R500 Microcode
platform radeon_cp.0: firmware: using built-in firmware radeon/R520_cp.bin
[drm] Num pipes: 4
[drm] writeback test succeeded in 1 usecs
<snip>
Ok there are 2 dvd drives that use to work with sysfs and a .30 kernel
now the 2.6.34-gentoo-r1 kernel is not working, and sysfs was removed
as was suggested in the old console logs upon booting.
Of the many Gentoo systems I manage, most have 2 dvd drives. Very few
are working since I removed sysfs and built 2.6.34-r1 kernels.....?
James
