Am 21.09.2013 12:47, schrieb Alexander Kapshuk:
I have both wired and wireless network interfaces configured: box0 log # rc-update show|egrep 'enp3s0|wlp2s0' net.enp3s0 | default net.wlp2s0 | default(1). Is there a way to instruct the system as to which network interface to use, so it doesn't try to bring up the one not intended to be used at boot time: box0 log # egrep 'enp3s0|wlp2s0' messages ------------------------------------------- Sep 21 12:30:18 localhost kernel: [ 12.268209] r8169 0000:03:00.0 enp3s0: link down Sep 21 12:30:18 localhost kernel: [ 12.268236] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready Sep 21 12:30:18 localhost /etc/init.d/net.enp3s0[1888]: No configuration specified; defaulting to DHCP Sep 21 12:30:18 localhost dhcpcd[1896]: enp3s0: waiting for carrier Sep 21 12:30:56 localhost /etc/init.d/net.enp3s0[1801]: ERROR: net.enp3s0 failed to start Sep 21 12:30:56 localhost kernel: [ 50.595278] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready Sep 21 12:30:56 localhost /etc/init.d/net.wlp2s0[1917]: WARNING: net.wlp2s0 has started, but is inactive Sep 21 12:30:56 localhost /etc/init.d/netmount[2007]: ERROR: cannot start netmount as net.enp3s0 would not start Sep 21 12:30:56 localhost /etc/init.d/sshd[2008]: ERROR: cannot start sshd as net.enp3s0 would not start Sep 21 12:30:57 localhost kernel: [ 51.817387] wlp2s0: authenticate with f4:ec:38:b9:59:a7 Sep 21 12:30:57 localhost kernel: [ 51.825344] wlp2s0: send auth to f4:ec:38:b9:59:a7 (try 1/3) Sep 21 12:30:57 localhost kernel: [ 51.826811] wlp2s0: authenticated Sep 21 12:30:57 localhost kernel: [ 51.827059] wlp2s0: associate with f4:ec:38:b9:59:a7 (try 1/3) Sep 21 12:30:57 localhost kernel: [ 51.829316] wlp2s0: RX AssocResp from f4:ec:38:b9:59:a7 (capab=0x411 status=0 aid=2) Sep 21 12:30:57 localhost kernel: [ 51.829586] wlp2s0: associated Sep 21 12:30:57 localhost kernel: [ 51.829598] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready Sep 21 12:30:59 localhost wpa_cli: interface wlp2s0 CONNECTED Sep 21 12:30:59 localhost /etc/init.d/net.wlp2s0[2130]: No configuration specified; defaulting to DHCP Sep 21 12:30:59 localhost dhcpcd[2138]: wlp2s0: sending IPv6 Router Solicitation Sep 21 12:30:59 localhost dhcpcd[2138]: wlp2s0: sendmsg: Cannot assign requested address Sep 21 12:30:59 localhost dhcpcd[2138]: wlp2s0: rebinding lease of 192.168.1.5 Sep 21 12:30:59 localhost dhcpcd[2138]: wlp2s0: acknowledged 192.168.1.5 from 192.168.1.1 `TP-LINK' Sep 21 12:30:59 localhost dhcpcd[2138]: wlp2s0: checking for 192.168.1.5 Sep 21 12:31:03 localhost dhcpcd[2138]: wlp2s0: sending IPv6 Router Solicitation Sep 21 12:31:03 localhost dhcpcd[2138]: wlp2s0: leased 192.168.1.5 for 259200 seconds Sep 21 12:31:07 localhost dhcpcd[2167]: wlp2s0: sending IPv6 Router Solicitation Sep 21 12:31:11 localhost dhcpcd[2167]: wlp2s0: sending IPv6 Router Solicitation Sep 21 12:31:11 localhost dhcpcd[2167]: wlp2s0: no IPv6 Routers available ------------------------------------------- (2). sshd seems to start only if the wired interface is up. How do I tell it start when the wireless interface is running? box0 log # rc-status|egrep 'enp3s0|wlp2s0|sshd' net.enp3s0 [ stopped ] net.wlp2s0 [ started ] sshd [ stopped ] Thanks.
Yeh, same advice here, try wicd first. If you don't want a GUI (or you don't have corresponding UI toolkits installed), there's also the option to configure and use wicd via the ncurses interface.
