On 02/03/2014 09:15 PM, Stephen Reynolds wrote:
> if I run ifconfig -a this currently what I get.
> I have completed the installtion, but Kernel Modules I am not sure about.
>
> eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
>         inet 192.168.1.105  netmask 255.255.255.0  broadcast 192.168.1.255
>         inet6 fe80::be5f:f4ff:fee8:5914  prefixlen 64  scopeid 0x20<link>
>         ether bc:5f:f4:e8:59:14  txqueuelen 1000  (Ethernet)
>         RX packets 435  bytes 234999 (229.4 KiB)
>         RX errors 0  dropped 0  overruns 0  frame 0
>         TX packets 476  bytes 90064 (87.9 KiB)
>         TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
>
> lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 16436
>         inet 127.0.0.1  netmask 255.0.0.0
>         inet6 ::1  prefixlen 128  scopeid 0x10<host>
>         loop  txqueuelen 0  (Local Loopback)
>         RX packets 4  bytes 300 (300.0 B)
>         RX errors 0  dropped 0  overruns 0  frame 0
>         TX packets 4  bytes 300 (300.0 B)
>         TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
>
> wlan0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
>         ether 00:0e:2e:e4:fb:cd  txqueuelen 1000  (Ethernet)
>         RX packets 0  bytes 0 (0.0 B)
>         RX errors 0  dropped 0  overruns 0  frame 0
>         TX packets 0  bytes 0 (0.0 B)
>         TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
>
> On 2/3/14, Amankwah <amankw...@gmail.com> wrote:
>> On Mon, Feb 03, 2014 at 02:36:29PM +0200, Stephen Reynolds wrote:
>>> Hi all
>>>
>>>
>>>
>>> I am doing a new Gentoo installation and I cannot get my network cards to
>>> work.
>>> I have two cards
>>>
>>>
>>>
>>> 1) eth0 =  Realtek RLTl8111e
>>>
>>> 2) wlan0 = RaLink RT2561/RT61
>>>
>>>
>>>
>>> Gen Kernel has support for both.
>>>
>>>
>>>
>>> Please advise me as to what steps I can take to fix this?
>>>
>> You should comfirm that the drivers of the adapters are compiled and
>> loaded correctly. And for the wireless network, relys on you AP settings
>> you may need the application like the net_wireless/wpa_supplicant.
>>
>>
Here's what I've got:
lspci -k
Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411
PCI Express Gigabit Ethernet Controller (rev 01)
    Subsystem: Gigabyte Technology Co., Ltd Motherboard
    Kernel driver in use: r8169
    Kernel modules: r8169

Hope this helps.


Reply via email to