On Wednesday 29 Jul 2015 18:38:07 James wrote:
>  <Meino.Cramer <at> gmx.de> writes:
> > J. Roeleveld <joost <at> antarean.org> [15-07-29 16:38]:
> > > On Wednesday, July 29, 2015 05:18:25 AM Meino.Cramer <at> gmx.de wrote:
> > > 
> > > Is this speed between both machines? Or to the internet?
> 
> Joost is exactly correct here. Test the links one connection at
> a time, not just all a once. You'll be able to get a 'sit of pants' feeling
> about the capabilities on each link (between devices). There are many many
> issues so let's first characterize each link by the bandwith.
> 
> 
> On ethernet interfaces this is a really cool tool::
> 
>  net-analyzer/bwmon   and net-analyzer/nbwmon
> 
> > I fired up create_ip like this (just for testing and haveing at least
> > ONE experienced succes with this Wifi stuff...):
> > 
> > create_ap wlan0 eth1 <name> <pass>
> > 
> > How can I check for the type of WIFI after the connection has been
> > established?
> 
> 'ip link'   and  'netstat -nr' are a good start. Later on we'll get
> you some gui tools and a monitoring software (a ton of options)...
> 
> > USB is USB 2.0
> > 
> > The speed is measured by conky, which reads the transfer rate at eth0.
> > At that tome, the tablet was getting a greater piece of tar archive
> > (LInux for Android) and no other traffic other than this was there.
> > The DSL was by far not saturated.
> 
> Really?  How do you know. It take lots of experimenting and testing
> and data collection over time to figure our exactly what your
> ISp(s) are doing. Usually several ISPs are in a link until you hit
> a 'peering point'
> 
> 'net-analyzer/traceroute'
> 
> is your friend. At some point the ISPs will block traceroute info....
> 
> > So physically it is the speed of the internet but logically it is
> > nearly identical to what happens at the Wifi interface (I think).
> > I will check for an app which displays the speed measured on the
> > tablets interface...
> 
> This is a very, very complicated issue. ISP(s) use devices to deliver
> and partition bandwidth; some with an incredible level of control
> (granularity). For instances they can 'port constrict' a service
> or a route to an endpoint or any number of things. So first fully
> study (characterize) the behavior of the links (connnections between
> devices) that you manage and develop that 'seat of pants' feeling about the
> network segments you manage. Then start sniffing up the outside folks,
> as best you can with the tools in the portage tree.....(many).
> 
> 
> You need to also understand that Usb has it's own problems, protocols and
> issues depending on how it was implemented by the chipsets use and the
> firmware inside the product. Other protocol (latencies and such) are
> layered on top of that.  Ju are 'full stack' wheelin and dealing as soon
> as your run gui apps across that link.........brau.
> 
> > Best regards,
> > Meino
> 
> ttfn,
> Always your pal!
> James

It could also be that the tablet has a slow write speed, if you were 
downloading a file.  Can you stream a video instead and see if this is 
achieving a higher speed?

-- 
Regards,
Mick

Attachment: signature.asc
Description: This is a digitally signed message part.

Reply via email to