I have this very strange problem on my old laptop (12+ years... maybe it's just dying now...)

When starting up, I have sddm configured to start up. But, it doesn't... it just sits there. If I log on as root, the X server immediately starts up.

I'm aware of the suid issue on xorg-server. I've compiled with the +suid flag with no difference. I've tried the non-root setup, no difference.

From the logs, X starts, says it's switching VTs then some seconds later it shuts down, nothing in the logs at all:

[ 103.423] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11) [ 103.423] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5 [ 103.423] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75 [ 103.423] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.040 [ 103.423] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[   103.423] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 103.423] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000 [ 103.423] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[   103.423] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 103.423] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0) [ 103.423] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[   104.833] (II) intel(0): EDID vendor "LPL", prod id 0
[ 104.833] (II) intel(0): EDID quirk: Detailed timings give vertical size in cm.
[   104.833] (II) intel(0): Printing DDC gathered Modelines:
[ 104.833] (II) intel(0): Modeline "1280x800"x0.0 71.25 1280 1328 1360 1440 800 802 808 823 -hsync -vsync (49.5 kHz eP) [ 104.833] (WW) intel(0): Output LVDS1: Strange aspect ratio (289/2100), consider adding a quirk
[   107.067] (II) event3  - Power Button: device removed
[   107.086] (II) event4  - Video Bus: device removed
[   107.102] (II) event2  - Power Button: device removed
[   107.118] (II) event0  - Sleep Button: device removed
[   107.134] (II) event5  - AT Translated Set 2 keyboard: device removed
[   107.166] (II) AIGLX: Suspending AIGLX clients for VT switch
[   174.780] (II) UnloadModule: "synaptics"
[   174.780] (II) UnloadModule: "libinput"
[   174.780] (II) UnloadModule: "libinput"
[   174.780] (II) UnloadModule: "libinput"
[   174.780] (II) UnloadModule: "libinput"
[   174.780] (II) UnloadModule: "libinput"
[   174.788] (II) Server terminated successfully (0). Closing log file.


It *always* fails on the first boot. This had been working before. When Xorg fails to start sddm doesn't even write anything to the its own log file.

I've tried `emerge -e @world` as sometime it can fix bizarre problems such as this one, had no luck...

I've attached the two log files.

Anyone else have any suggestions?

Dan
[   368.091] (--) Log file renamed from "/var/log/Xorg.pid-2129.log" to "/var/log/Xorg.0.log"
[   368.092] 
X.Org X Server 1.20.3
X Protocol Version 11, Revision 0
[   368.092] Build Operating System: Linux 4.14.78-gentoo x86_64 Gentoo
[   368.092] Current Operating System: Linux lglaptop 4.14.78-gentoo #1 SMP Mon Nov 19 22:51:03 PST 2018 x86_64
[   368.092] Kernel command line: BOOT_IMAGE=/boot/kernel-4.14.78-gentoo root=PARTUUID=88a3c0b3-06 quiet rootfstype=ext4
[   368.092] Build Date: 22 November 2018  08:23:42AM
[   368.092]  
[   368.092] Current version of pixman: 0.34.0
[   368.092] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   368.092] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   368.093] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Nov 28 12:01:32 2018
[   368.101] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   368.102] (==) No Layout section.  Using the first Screen section.
[   368.102] (==) No screen section available. Using defaults.
[   368.102] (**) |-->Screen "Default Screen Section" (0)
[   368.102] (**) |   |-->Monitor "<default monitor>"
[   368.102] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   368.102] (==) Automatically adding devices
[   368.102] (==) Automatically enabling devices
[   368.102] (==) Automatically adding GPU devices
[   368.103] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   368.111] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
[   368.111] (==) ModulePath set to "/usr/lib64/xorg/modules"
[   368.111] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   368.111] (II) Loader magic: 0x55864f59ec20
[   368.111] (II) Module ABI versions:
[   368.111] 	X.Org ANSI C Emulation: 0.4
[   368.111] 	X.Org Video Driver: 24.0
[   368.111] 	X.Org XInput driver : 24.1
[   368.111] 	X.Org Server Extension : 10.0
[   368.112] (II) xfree86: Adding drm device (/dev/dri/card0)
[   368.127] (--) PCI:*(0@0:2:0) 8086:27a2:1462:0341 rev 3, Mem @ 0xfe080000/524288, 0xd0000000/268435456, 0xfe040000/262144, I/O @ 0x0000cc00/8, BIOS @ 0x????????/131072
[   368.127] (--) PCI: (0@0:2:1) 8086:27a6:1462:0341 rev 3, Mem @ 0xc0000000/524288
[   368.127] (II) LoadModule: "glx"
[   368.130] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[   368.148] (II) Module glx: vendor="X.Org Foundation"
[   368.148] 	compiled for 1.20.3, module version = 1.0.0
[   368.148] 	ABI class: X.Org Server Extension, version 10.0
[   368.148] (==) Matched intel as autoconfigured driver 0
[   368.148] (==) Matched modesetting as autoconfigured driver 1
[   368.148] (==) Matched fbdev as autoconfigured driver 2
[   368.148] (==) Matched vesa as autoconfigured driver 3
[   368.148] (==) Assigned the driver to the xf86ConfigLayout
[   368.148] (II) LoadModule: "intel"
[   368.148] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
[   368.153] (II) Module intel: vendor="X.Org Foundation"
[   368.153] 	compiled for 1.20.3, module version = 2.99.917
[   368.153] 	Module class: X.Org Video Driver
[   368.153] 	ABI class: X.Org Video Driver, version 24.0
[   368.153] (II) LoadModule: "modesetting"
[   368.153] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[   368.154] (II) Module modesetting: vendor="X.Org Foundation"
[   368.154] 	compiled for 1.20.3, module version = 1.20.3
[   368.154] 	Module class: X.Org Video Driver
[   368.154] 	ABI class: X.Org Video Driver, version 24.0
[   368.154] (II) LoadModule: "fbdev"
[   368.156] (WW) Warning, couldn't open module fbdev
[   368.156] (EE) Failed to load module "fbdev" (module does not exist, 0)
[   368.156] (II) LoadModule: "vesa"
[   368.157] (WW) Warning, couldn't open module vesa
[   368.157] (EE) Failed to load module "vesa" (module does not exist, 0)
[   368.157] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[   368.157] (II) intel: Driver for Intel(R) HD Graphics
[   368.157] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[   368.157] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[   368.157] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[   368.157] (++) using VT number 7

[   368.197] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20170818
[   368.209] (WW) Falling back to old probe method for modesetting
[   368.210] (--) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
[   368.210] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3; using a maximum of 2 threads
[   368.210] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[   368.210] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[   368.210] (==) intel(0): RGB weight 888
[   368.210] (==) intel(0): Default visual is TrueColor
[   368.211] (II) intel(0): Output LVDS1 has no monitor section
[   368.211] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output LVDS1
[   368.211] (II) intel(0): Enabled output LVDS1
[   368.211] (II) intel(0): Output VGA1 has no monitor section
[   368.211] (II) intel(0): Enabled output VGA1
[   368.211] (II) intel(0): Output TV1 has no monitor section
[   368.211] (II) intel(0): Enabled output TV1
[   368.212] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[   368.212] (II) intel(0): Output VIRTUAL1 has no monitor section
[   368.212] (II) intel(0): Enabled output VIRTUAL1
[   368.212] (--) intel(0): Output LVDS1 using initial mode 1280x800 on pipe 1
[   368.212] (==) intel(0): TearFree disabled
[   368.212] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[   368.212] (==) intel(0): DPI set to (96, 96)
[   368.212] (II) Loading sub module "dri3"
[   368.212] (II) LoadModule: "dri3"
[   368.212] (II) Module "dri3" already built-in
[   368.212] (II) Loading sub module "dri2"
[   368.212] (II) LoadModule: "dri2"
[   368.212] (II) Module "dri2" already built-in
[   368.212] (II) Loading sub module "present"
[   368.212] (II) LoadModule: "present"
[   368.212] (II) Module "present" already built-in
[   368.212] (II) UnloadModule: "modesetting"
[   368.212] (II) Unloading modesetting
[   368.217] (II) intel(0): SNA initialized with Alviso (gen3) backend
[   368.217] (==) intel(0): Backing store enabled
[   368.217] (==) intel(0): Silken mouse enabled
[   368.218] (II) intel(0): HW Cursor enabled
[   368.219] (==) intel(0): DPMS enabled
[   368.219] (==) intel(0): Display hotplug detection enabled
[   368.220] (II) intel(0): [DRI2] Setup complete
[   368.220] (II) intel(0): [DRI2]   DRI driver: i915
[   368.220] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[   368.220] (II) intel(0): direct rendering: DRI2 enabled
[   368.220] (II) intel(0): hardware support for Present enabled
[   368.220] (II) Initializing extension Generic Event Extension
[   368.220] (II) Initializing extension SHAPE
[   368.220] (II) Initializing extension MIT-SHM
[   368.220] (II) Initializing extension XInputExtension
[   368.221] (II) Initializing extension XTEST
[   368.221] (II) Initializing extension BIG-REQUESTS
[   368.221] (II) Initializing extension SYNC
[   368.221] (II) Initializing extension XKEYBOARD
[   368.221] (II) Initializing extension XC-MISC
[   368.221] (II) Initializing extension XFIXES
[   368.221] (II) Initializing extension RENDER
[   368.221] (II) Initializing extension RANDR
[   368.221] (II) Initializing extension COMPOSITE
[   368.221] (II) Initializing extension DAMAGE
[   368.221] (II) Initializing extension MIT-SCREEN-SAVER
[   368.221] (II) Initializing extension DOUBLE-BUFFER
[   368.221] (II) Initializing extension RECORD
[   368.221] (II) Initializing extension DPMS
[   368.221] (II) Initializing extension Present
[   368.221] (II) Initializing extension DRI3
[   368.221] (II) Initializing extension X-Resource
[   368.221] (II) Initializing extension XVideo
[   368.221] (II) Initializing extension XVideo-MotionCompensation
[   368.221] (II) Initializing extension GLX
[   368.458] (II) AIGLX: Loaded and initialized i915
[   368.458] (II) GLX: Initialized DRI2 GL provider for screen 0
[   368.458] (II) Initializing extension XFree86-VidModeExtension
[   368.458] (II) Initializing extension XFree86-DGA
[   368.458] (II) Initializing extension XFree86-DRI
[   368.458] (II) Initializing extension DRI2
[   368.472] (II) intel(0): switch to mode 1280x800@60.0 on LVDS1 using pipe 1, position (0, 0), rotation normal, reflection none
[   368.553] (II) intel(0): Setting screen physical size to 338 x 211
[   368.743] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[   368.743] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   368.743] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   368.743] (II) LoadModule: "libinput"
[   368.743] (II) Loading /usr/lib64/xorg/modules/input/libinput_drv.so
[   368.751] (II) Module libinput: vendor="X.Org Foundation"
[   368.751] 	compiled for 1.20.3, module version = 0.28.1
[   368.751] 	Module class: X.Org XInput Driver
[   368.751] 	ABI class: X.Org XInput driver, version 24.1
[   368.751] (II) Using input driver 'libinput' for 'Power Button'
[   368.751] (**) Power Button: always reports core events
[   368.751] (**) Option "Device" "/dev/input/event3"
[   368.751] (**) Option "_source" "server/udev"
[   368.752] (II) event3  - Power Button: is tagged by udev as: Keyboard
[   368.752] (II) event3  - Power Button: device is a keyboard
[   368.752] (II) event3  - Power Button: device removed
[   368.769] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[   368.769] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   368.770] (II) event3  - Power Button: is tagged by udev as: Keyboard
[   368.770] (II) event3  - Power Button: device is a keyboard
[   368.770] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[   368.770] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   368.770] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[   368.770] (II) Using input driver 'libinput' for 'Video Bus'
[   368.770] (**) Video Bus: always reports core events
[   368.770] (**) Option "Device" "/dev/input/event4"
[   368.770] (**) Option "_source" "server/udev"
[   368.771] (II) event4  - Video Bus: is tagged by udev as: Keyboard
[   368.771] (II) event4  - Video Bus: device is a keyboard
[   368.771] (II) event4  - Video Bus: device removed
[   368.789] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4"
[   368.789] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[   368.789] (II) event4  - Video Bus: is tagged by udev as: Keyboard
[   368.789] (II) event4  - Video Bus: device is a keyboard
[   368.790] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[   368.790] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   368.790] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   368.790] (II) Using input driver 'libinput' for 'Power Button'
[   368.790] (**) Power Button: always reports core events
[   368.790] (**) Option "Device" "/dev/input/event2"
[   368.790] (**) Option "_source" "server/udev"
[   368.790] (II) event2  - Power Button: is tagged by udev as: Keyboard
[   368.790] (II) event2  - Power Button: device is a keyboard
[   368.790] (II) event2  - Power Button: device removed
[   368.809] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[   368.809] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[   368.809] (II) event2  - Power Button: is tagged by udev as: Keyboard
[   368.809] (II) event2  - Power Button: device is a keyboard
[   368.810] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[   368.810] (II) No input driver specified, ignoring this device.
[   368.810] (II) This device may have been added with another device file.
[   368.810] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[   368.810] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[   368.810] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[   368.810] (II) Using input driver 'libinput' for 'Sleep Button'
[   368.810] (**) Sleep Button: always reports core events
[   368.810] (**) Option "Device" "/dev/input/event0"
[   368.810] (**) Option "_source" "server/udev"
[   368.811] (II) event0  - Sleep Button: is tagged by udev as: Keyboard
[   368.811] (II) event0  - Sleep Button: device is a keyboard
[   368.811] (II) event0  - Sleep Button: device removed
[   368.829] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[   368.829] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[   368.829] (II) event0  - Sleep Button: is tagged by udev as: Keyboard
[   368.829] (II) event0  - Sleep Button: device is a keyboard
[   368.830] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event7)
[   368.830] (II) No input driver specified, ignoring this device.
[   368.830] (II) This device may have been added with another device file.
[   368.830] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event8)
[   368.831] (II) No input driver specified, ignoring this device.
[   368.831] (II) This device may have been added with another device file.
[   368.831] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event9)
[   368.831] (II) No input driver specified, ignoring this device.
[   368.831] (II) This device may have been added with another device file.
[   368.831] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event5)
[   368.831] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[   368.831] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[   368.831] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[   368.831] (**) AT Translated Set 2 keyboard: always reports core events
[   368.831] (**) Option "Device" "/dev/input/event5"
[   368.831] (**) Option "_source" "server/udev"
[   368.832] (II) event5  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[   368.832] (II) event5  - AT Translated Set 2 keyboard: device is a keyboard
[   368.832] (II) event5  - AT Translated Set 2 keyboard: device removed
[   368.849] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input5/event5"
[   368.849] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[   368.849] (II) event5  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[   368.849] (II) event5  - AT Translated Set 2 keyboard: device is a keyboard
[   368.850] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
[   368.850] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[   368.850] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[   368.850] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[   368.850] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[   368.850] (II) LoadModule: "synaptics"
[   368.850] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
[   368.853] (II) Module synaptics: vendor="X.Org Foundation"
[   368.853] 	compiled for 1.20.3, module version = 1.9.1
[   368.853] 	Module class: X.Org XInput Driver
[   368.853] 	ABI class: X.Org XInput driver, version 24.1
[   368.853] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[   368.853] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   368.853] (**) Option "Device" "/dev/input/event6"
[   368.869] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 (res 81)
[   368.869] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 (res 95)
[   368.869] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[   368.869] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[   368.869] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[   368.869] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[   368.869] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[   368.869] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   368.885] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input11/event6"
[   368.885] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[   368.885] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[   368.885] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[   368.885] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.040
[   368.885] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[   368.885] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[   368.885] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[   368.885] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[   368.885] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[   368.886] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[   368.886] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[   370.213] (II) intel(0): EDID vendor "LPL", prod id 0
[   370.213] (II) intel(0):     EDID quirk: Detailed timings give vertical size in cm.
[   370.213] (II) intel(0): Printing DDC gathered Modelines:
[   370.213] (II) intel(0): Modeline "1280x800"x0.0   71.25  1280 1328 1360 1440  800 802 808 823 -hsync -vsync (49.5 kHz eP)
[   370.213] (WW) intel(0): Output LVDS1: Strange aspect ratio (289/2100), consider adding a quirk
[   102.729] (--) Log file renamed from "/var/log/Xorg.pid-1947.log" to "/var/log/Xorg.0.log"
[   102.731] 
X.Org X Server 1.20.3
X Protocol Version 11, Revision 0
[   102.731] Build Operating System: Linux 4.14.78-gentoo x86_64 Gentoo
[   102.731] Current Operating System: Linux lglaptop 4.14.78-gentoo #1 SMP Mon Nov 19 22:51:03 PST 2018 x86_64
[   102.731] Kernel command line: BOOT_IMAGE=/boot/kernel-4.14.78-gentoo root=PARTUUID=88a3c0b3-06 quiet rootfstype=ext4
[   102.731] Build Date: 22 November 2018  08:23:42AM
[   102.731]  
[   102.731] Current version of pixman: 0.34.0
[   102.731] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   102.731] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   102.731] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Nov 28 11:53:49 2018
[   102.739] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   102.741] (==) No Layout section.  Using the first Screen section.
[   102.741] (==) No screen section available. Using defaults.
[   102.741] (**) |-->Screen "Default Screen Section" (0)
[   102.741] (**) |   |-->Monitor "<default monitor>"
[   102.741] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   102.741] (==) Automatically adding devices
[   102.741] (==) Automatically enabling devices
[   102.741] (==) Automatically adding GPU devices
[   102.741] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   102.750] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
[   102.750] (==) ModulePath set to "/usr/lib64/xorg/modules"
[   102.750] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   102.750] (II) Loader magic: 0x55b848555c20
[   102.750] (II) Module ABI versions:
[   102.750] 	X.Org ANSI C Emulation: 0.4
[   102.750] 	X.Org Video Driver: 24.0
[   102.750] 	X.Org XInput driver : 24.1
[   102.750] 	X.Org Server Extension : 10.0
[   102.750] (II) xfree86: Adding drm device (/dev/dri/card0)
[   102.768] (--) PCI:*(0@0:2:0) 8086:27a2:1462:0341 rev 3, Mem @ 0xfe080000/524288, 0xd0000000/268435456, 0xfe040000/262144, I/O @ 0x0000cc00/8, BIOS @ 0x????????/131072
[   102.768] (--) PCI: (0@0:2:1) 8086:27a6:1462:0341 rev 3, Mem @ 0xc0000000/524288
[   102.768] (II) LoadModule: "glx"
[   102.771] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[   102.791] (II) Module glx: vendor="X.Org Foundation"
[   102.791] 	compiled for 1.20.3, module version = 1.0.0
[   102.791] 	ABI class: X.Org Server Extension, version 10.0
[   102.791] (==) Matched intel as autoconfigured driver 0
[   102.791] (==) Matched modesetting as autoconfigured driver 1
[   102.791] (==) Matched fbdev as autoconfigured driver 2
[   102.791] (==) Matched vesa as autoconfigured driver 3
[   102.791] (==) Assigned the driver to the xf86ConfigLayout
[   102.791] (II) LoadModule: "intel"
[   102.791] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
[   102.795] (II) Module intel: vendor="X.Org Foundation"
[   102.795] 	compiled for 1.20.3, module version = 2.99.917
[   102.795] 	Module class: X.Org Video Driver
[   102.795] 	ABI class: X.Org Video Driver, version 24.0
[   102.795] (II) LoadModule: "modesetting"
[   102.795] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[   102.797] (II) Module modesetting: vendor="X.Org Foundation"
[   102.797] 	compiled for 1.20.3, module version = 1.20.3
[   102.797] 	Module class: X.Org Video Driver
[   102.797] 	ABI class: X.Org Video Driver, version 24.0
[   102.797] (II) LoadModule: "fbdev"
[   102.799] (WW) Warning, couldn't open module fbdev
[   102.799] (EE) Failed to load module "fbdev" (module does not exist, 0)
[   102.799] (II) LoadModule: "vesa"
[   102.799] (WW) Warning, couldn't open module vesa
[   102.799] (EE) Failed to load module "vesa" (module does not exist, 0)
[   102.799] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[   102.800] (II) intel: Driver for Intel(R) HD Graphics
[   102.800] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[   102.800] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[   102.800] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[   102.800] (++) using VT number 7

[   102.816] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20170818
[   102.829] (WW) Falling back to old probe method for modesetting
[   102.830] (--) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
[   102.830] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3; using a maximum of 2 threads
[   102.830] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[   102.830] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[   102.830] (==) intel(0): RGB weight 888
[   102.830] (==) intel(0): Default visual is TrueColor
[   102.831] (II) intel(0): Output LVDS1 has no monitor section
[   102.831] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output LVDS1
[   102.831] (II) intel(0): Enabled output LVDS1
[   102.831] (II) intel(0): Output VGA1 has no monitor section
[   102.831] (II) intel(0): Enabled output VGA1
[   102.831] (II) intel(0): Output TV1 has no monitor section
[   102.831] (II) intel(0): Enabled output TV1
[   102.831] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[   102.832] (II) intel(0): Output VIRTUAL1 has no monitor section
[   102.832] (II) intel(0): Enabled output VIRTUAL1
[   102.832] (--) intel(0): Output LVDS1 using initial mode 1280x800 on pipe 1
[   102.832] (==) intel(0): TearFree disabled
[   102.832] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[   102.832] (==) intel(0): DPI set to (96, 96)
[   102.832] (II) Loading sub module "dri3"
[   102.832] (II) LoadModule: "dri3"
[   102.832] (II) Module "dri3" already built-in
[   102.832] (II) Loading sub module "dri2"
[   102.832] (II) LoadModule: "dri2"
[   102.832] (II) Module "dri2" already built-in
[   102.832] (II) Loading sub module "present"
[   102.832] (II) LoadModule: "present"
[   102.832] (II) Module "present" already built-in
[   102.832] (II) UnloadModule: "modesetting"
[   102.832] (II) Unloading modesetting
[   102.837] (II) intel(0): SNA initialized with Alviso (gen3) backend
[   102.837] (==) intel(0): Backing store enabled
[   102.837] (==) intel(0): Silken mouse enabled
[   102.838] (II) intel(0): HW Cursor enabled
[   102.839] (==) intel(0): DPMS enabled
[   102.839] (==) intel(0): Display hotplug detection enabled
[   102.840] (II) intel(0): [DRI2] Setup complete
[   102.840] (II) intel(0): [DRI2]   DRI driver: i915
[   102.840] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[   102.840] (II) intel(0): direct rendering: DRI2 enabled
[   102.840] (II) intel(0): hardware support for Present enabled
[   102.840] (II) Initializing extension Generic Event Extension
[   102.840] (II) Initializing extension SHAPE
[   102.840] (II) Initializing extension MIT-SHM
[   102.840] (II) Initializing extension XInputExtension
[   102.841] (II) Initializing extension XTEST
[   102.841] (II) Initializing extension BIG-REQUESTS
[   102.841] (II) Initializing extension SYNC
[   102.841] (II) Initializing extension XKEYBOARD
[   102.841] (II) Initializing extension XC-MISC
[   102.841] (II) Initializing extension XFIXES
[   102.841] (II) Initializing extension RENDER
[   102.841] (II) Initializing extension RANDR
[   102.841] (II) Initializing extension COMPOSITE
[   102.841] (II) Initializing extension DAMAGE
[   102.841] (II) Initializing extension MIT-SCREEN-SAVER
[   102.841] (II) Initializing extension DOUBLE-BUFFER
[   102.841] (II) Initializing extension RECORD
[   102.841] (II) Initializing extension DPMS
[   102.841] (II) Initializing extension Present
[   102.841] (II) Initializing extension DRI3
[   102.841] (II) Initializing extension X-Resource
[   102.841] (II) Initializing extension XVideo
[   102.841] (II) Initializing extension XVideo-MotionCompensation
[   102.841] (II) Initializing extension GLX
[   103.078] (II) AIGLX: Loaded and initialized i915
[   103.078] (II) GLX: Initialized DRI2 GL provider for screen 0
[   103.078] (II) Initializing extension XFree86-VidModeExtension
[   103.078] (II) Initializing extension XFree86-DGA
[   103.078] (II) Initializing extension XFree86-DRI
[   103.078] (II) Initializing extension DRI2
[   103.092] (II) intel(0): switch to mode 1280x800@60.0 on LVDS1 using pipe 1, position (0, 0), rotation normal, reflection none
[   103.094] (II) intel(0): Setting screen physical size to 338 x 211
[   103.282] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[   103.283] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   103.283] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   103.283] (II) LoadModule: "libinput"
[   103.283] (II) Loading /usr/lib64/xorg/modules/input/libinput_drv.so
[   103.290] (II) Module libinput: vendor="X.Org Foundation"
[   103.290] 	compiled for 1.20.3, module version = 0.28.1
[   103.290] 	Module class: X.Org XInput Driver
[   103.290] 	ABI class: X.Org XInput driver, version 24.1
[   103.290] (II) Using input driver 'libinput' for 'Power Button'
[   103.290] (**) Power Button: always reports core events
[   103.291] (**) Option "Device" "/dev/input/event3"
[   103.291] (**) Option "_source" "server/udev"
[   103.291] (II) event3  - Power Button: is tagged by udev as: Keyboard
[   103.291] (II) event3  - Power Button: device is a keyboard
[   103.291] (II) event3  - Power Button: device removed
[   103.308] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[   103.308] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   103.308] (II) event3  - Power Button: is tagged by udev as: Keyboard
[   103.308] (II) event3  - Power Button: device is a keyboard
[   103.308] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[   103.308] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   103.308] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[   103.308] (II) Using input driver 'libinput' for 'Video Bus'
[   103.308] (**) Video Bus: always reports core events
[   103.308] (**) Option "Device" "/dev/input/event4"
[   103.308] (**) Option "_source" "server/udev"
[   103.309] (II) event4  - Video Bus: is tagged by udev as: Keyboard
[   103.309] (II) event4  - Video Bus: device is a keyboard
[   103.309] (II) event4  - Video Bus: device removed
[   103.328] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4"
[   103.328] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[   103.328] (II) event4  - Video Bus: is tagged by udev as: Keyboard
[   103.328] (II) event4  - Video Bus: device is a keyboard
[   103.328] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[   103.328] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   103.328] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   103.328] (II) Using input driver 'libinput' for 'Power Button'
[   103.328] (**) Power Button: always reports core events
[   103.328] (**) Option "Device" "/dev/input/event2"
[   103.328] (**) Option "_source" "server/udev"
[   103.328] (II) event2  - Power Button: is tagged by udev as: Keyboard
[   103.328] (II) event2  - Power Button: device is a keyboard
[   103.328] (II) event2  - Power Button: device removed
[   103.348] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[   103.348] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[   103.348] (II) event2  - Power Button: is tagged by udev as: Keyboard
[   103.348] (II) event2  - Power Button: device is a keyboard
[   103.348] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[   103.348] (II) No input driver specified, ignoring this device.
[   103.348] (II) This device may have been added with another device file.
[   103.348] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[   103.348] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[   103.348] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[   103.348] (II) Using input driver 'libinput' for 'Sleep Button'
[   103.348] (**) Sleep Button: always reports core events
[   103.348] (**) Option "Device" "/dev/input/event0"
[   103.348] (**) Option "_source" "server/udev"
[   103.349] (II) event0  - Sleep Button: is tagged by udev as: Keyboard
[   103.349] (II) event0  - Sleep Button: device is a keyboard
[   103.349] (II) event0  - Sleep Button: device removed
[   103.368] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[   103.368] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[   103.368] (II) event0  - Sleep Button: is tagged by udev as: Keyboard
[   103.368] (II) event0  - Sleep Button: device is a keyboard
[   103.368] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event7)
[   103.368] (II) No input driver specified, ignoring this device.
[   103.368] (II) This device may have been added with another device file.
[   103.368] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event8)
[   103.369] (II) No input driver specified, ignoring this device.
[   103.369] (II) This device may have been added with another device file.
[   103.369] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event9)
[   103.369] (II) No input driver specified, ignoring this device.
[   103.369] (II) This device may have been added with another device file.
[   103.369] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event5)
[   103.369] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[   103.369] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[   103.369] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[   103.369] (**) AT Translated Set 2 keyboard: always reports core events
[   103.369] (**) Option "Device" "/dev/input/event5"
[   103.369] (**) Option "_source" "server/udev"
[   103.370] (II) event5  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[   103.370] (II) event5  - AT Translated Set 2 keyboard: device is a keyboard
[   103.370] (II) event5  - AT Translated Set 2 keyboard: device removed
[   103.388] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input5/event5"
[   103.388] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[   103.388] (II) event5  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[   103.388] (II) event5  - AT Translated Set 2 keyboard: device is a keyboard
[   103.388] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
[   103.388] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[   103.388] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[   103.388] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[   103.388] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[   103.388] (II) LoadModule: "synaptics"
[   103.388] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
[   103.391] (II) Module synaptics: vendor="X.Org Foundation"
[   103.391] 	compiled for 1.20.3, module version = 1.9.1
[   103.391] 	Module class: X.Org XInput Driver
[   103.391] 	ABI class: X.Org XInput driver, version 24.1
[   103.391] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[   103.391] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   103.391] (**) Option "Device" "/dev/input/event6"
[   103.407] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 (res 81)
[   103.407] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 (res 95)
[   103.407] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[   103.407] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[   103.407] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[   103.407] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[   103.407] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[   103.407] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   103.423] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input11/event6"
[   103.423] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[   103.423] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[   103.423] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[   103.423] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.040
[   103.423] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[   103.423] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[   103.423] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[   103.423] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[   103.423] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[   103.423] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[   103.423] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[   104.833] (II) intel(0): EDID vendor "LPL", prod id 0
[   104.833] (II) intel(0):     EDID quirk: Detailed timings give vertical size in cm.
[   104.833] (II) intel(0): Printing DDC gathered Modelines:
[   104.833] (II) intel(0): Modeline "1280x800"x0.0   71.25  1280 1328 1360 1440  800 802 808 823 -hsync -vsync (49.5 kHz eP)
[   104.833] (WW) intel(0): Output LVDS1: Strange aspect ratio (289/2100), consider adding a quirk
[   107.067] (II) event3  - Power Button: device removed
[   107.086] (II) event4  - Video Bus: device removed
[   107.102] (II) event2  - Power Button: device removed
[   107.118] (II) event0  - Sleep Button: device removed
[   107.134] (II) event5  - AT Translated Set 2 keyboard: device removed
[   107.166] (II) AIGLX: Suspending AIGLX clients for VT switch
[   174.780] (II) UnloadModule: "synaptics"
[   174.780] (II) UnloadModule: "libinput"
[   174.780] (II) UnloadModule: "libinput"
[   174.780] (II) UnloadModule: "libinput"
[   174.780] (II) UnloadModule: "libinput"
[   174.780] (II) UnloadModule: "libinput"
[   174.788] (II) Server terminated successfully (0). Closing log file.

Reply via email to