On Thursday, 9 September 2021 14:00:50 BST Michael wrote: > On Thursday, 9 September 2021 00:25:41 BST Philip Webb wrote: > > I have cropped some .png images using Gwenview > > & the reduced versions are faded with Gwenview, but fully colored with > > Feh. > > I've tried using 'convert' to create .jpg versions, > > but while they're much smaller in Kbytes (good), > > they're also faded when viewed with Gwenview (Feh ok). > > > > Can anyone explain what has caused this ? > > Is there a way of correcting it, eg with Imagemagick ? > > Once you have converted an original raster image into a smaller (i.e. more > compressed) jpeg image you have thrown away some pixels. Post-processing > can't put these missing pixels back. > > I think the gwenview faded display phenomenon you describe here is unlikely > to be the result of your conversion, since feh displays it without any > fading. It may be caused by gwenview scaling the image to a different size, > to make it fit in the gwenview window, unlike feh which will open it in its > original size whether its full size dimensions fit in your PC monitor or > not. You can check the gwenview % reduction/increase shown at the bottom > right hand corner and change this to 100% to see if it makes any odds. > > In the gwenview settings you can select what the default 'Zoom Mode' is, if > indeed this is the cause of the faded image display. > > Another thing perhaps related could be the anti-aliasing gwenview applies to > fit the image in the window aperture and how this interacts with the image > elements and the resolution of your monitor - you should be able to check > this if you change the zoom level. > > https://photo.stackexchange.com/questions/24512/what-is-aliasing-and-anti-al > iasing > > On the same PC/monitor with the same display dimensions for an image > gwenview (with its default settings) and feh ought to produce the same > output - at least they do so here.
I may have misread your OP - apologies: "... but fully *colored* with Feh." This is probably related to the colour gamut settings of gwenview. In the gwenview settings, on the Advanced tab, there are settings for "Rendering intent" and "Colour profile". Change these and see if it makes a difference.
signature.asc
Description: This is a digitally signed message part.
