On 2/12/07, Roman Naumann <[EMAIL PROTECTED]> wrote:
On 2/12/07, Hans-Werner Hilse <[EMAIL PROTECTED]> wrote: > Hi, > > On Mon, 12 Feb 2007 09:54:42 +0100 "Roman Naumann" > <[EMAIL PROTECTED]> wrote: > > > Ifconfig eth0 gives me this: > > > > Link encap: > > > > UNSPEC HWaddr 44-4F-C0-00-14-31-AC-10-00-00-00-00-00-00-00-00 > > [...] > > I'm pretty sure the Mac-Addr is too long.. that's weird, > > Also, when using Sabayon, the first line differs: "Link encap:ether" > > and the mac is correct > > > > I tried to change the mac with: > > ifconfig eth0 hw ether 10:20:30:40:50:60 > > but then, I get th following: > > SIOCSIFHWADDR: Invalid argument > > eth0 doesn't seem to be what it has been anymore. You probably compiled > a new kernel with some extra network drivers (USB devices? Firewire?). > Looking at the "MAC" address above, I'd say it's something designated > for a peer-to-peer connection. > > use "ifconfig -a" to find your real network interface. If it's not > shown there (under different name, of course), you're probably missing > the right modules. You might want to use udev to give your interfaces a > persistent naming in the future, that will save you these troubles. > > -hwh > > > -- > gentoo-user@gentoo.org mailing list > > thanks for your quick answer. yes, there is a new interface named eth1 and it works. (so it seems that this problem was caused by replacing coldplug with udev)
In fact, you may have a firewire connection, and that is being recognized as eth0, try adding "nofirewire" to your kernel boot line, and check if eth0 will be your network card again. Also, there was a similar problem on the list a few days ago and the OP of that thread asked for UDEV rules to set names to its interfaces, check the archives. -- Daniel da Veiga Computer Operator - RS - Brazil -----BEGIN GEEK CODE BLOCK----- Version: 3.1 GCM/IT/P/O d-? s:- a? C++$ UBLA++ P+ L++ E--- W+++$ N o+ K- w O M- V- PS PE Y PGP- t+ 5 X+++ R+* tv b+ DI+++ D+ G+ e h+ r+ y++ ------END GEEK CODE BLOCK------ -- gentoo-user@gentoo.org mailing list