I seem to have the permissions wrong in fstab. On boot I do have an icon on the desktop for the LVM volume, which can be browsed as root, but not as a user.
I want read/write permissions to the LVM volume as user "thufir" (or any user, really). Can this be done? arrakis ~ # arrakis ~ # fdisk /dev/hda The number of cylinders for this disk is set to 9729. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Command (m for help): p Disk /dev/hda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hda1 1 1912 15358108+ 83 Linux /dev/hda2 1913 1925 104422+ 83 Linux /dev/hda3 1926 9729 62685630 8e Linux LVM Command (m for help): q arrakis ~ # arrakis ~ # fdisk /dev/hdb The number of cylinders for this disk is set to 59582. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Command (m for help): p Disk /dev/hdb: 30.7 GB, 30750031872 bytes 16 heads, 63 sectors/track, 59582 cylinders Units = cylinders of 1008 * 512 = 516096 bytes Device Boot Start End Blocks Id System /dev/hdb1 1 203 102280+ 83 Linux /dev/hdb2 204 2109 960624 82 Linux swap / Solaris /dev/hdb3 2110 59579 28964880 83 Linux Command (m for help): q arrakis ~ # arrakis ~ # cat lvm.txt #load device module modprobe dm-mod #change the volumes that exist to active vgchange -ay #mount the logical partition mkdir -p /mnt/VolGroup00/LogVol00 mount /dev/VolGroup00/LogVol00 /mnt/VolGroup00/LogVol00 arrakis ~ # arrakis ~ # cat /etc/fstab /dev/hdb1 /boot ext2 defaults 1 2 /dev/hdb2 none swap sw 0 0 /dev/hdb3 / ext3 noatime 0 1 none /proc proc defaults 0 0 none /dev/shm tmpfs defaults 0 0 /dev/VolGroup00/LogVol00 /mnt/VolGroup00/LogVol00 ext3 users,rw 0 0 arrakis ~ # arrakis ~ # su thufir [EMAIL PROTECTED] /root $ cd [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ ll /mnt/VolGroup00/LogVol00/home/thufir/ ls: cannot open directory /mnt/VolGroup00/LogVol00/home/thufir/: Permission denied [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ whoami thufir [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ ll /home/thufir/Desktop/ total 0 [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ date Mon Oct 8 01:16:52 PDT 2007 [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ arrakis ~ # arrakis ~ # fdisk /dev/hda The number of cylinders for this disk is set to 9729. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Command (m for help): p Disk /dev/hda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hda1 1 1912 15358108+ 83 Linux /dev/hda2 1913 1925 104422+ 83 Linux /dev/hda3 1926 9729 62685630 8e Linux LVM Command (m for help): q arrakis ~ # arrakis ~ # fdisk /dev/hdb The number of cylinders for this disk is set to 59582. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Command (m for help): p Disk /dev/hdb: 30.7 GB, 30750031872 bytes 16 heads, 63 sectors/track, 59582 cylinders Units = cylinders of 1008 * 512 = 516096 bytes Device Boot Start End Blocks Id System /dev/hdb1 1 203 102280+ 83 Linux /dev/hdb2 204 2109 960624 82 Linux swap / Solaris /dev/hdb3 2110 59579 28964880 83 Linux Command (m for help): q arrakis ~ # arrakis ~ # cat lvm.txt #load device module modprobe dm-mod #change the volumes that exist to active vgchange -ay #mount the logical partition mkdir -p /mnt/VolGroup00/LogVol00 mount /dev/VolGroup00/LogVol00 /mnt/VolGroup00/LogVol00 arrakis ~ # arrakis ~ # cat /etc/fstab /dev/hdb1 /boot ext2 defaults 1 2 /dev/hdb2 none swap sw 0 0 /dev/hdb3 / ext3 noatime 0 1 none /proc proc defaults 0 0 none /dev/shm tmpfs defaults 0 0 /dev/VolGroup00/LogVol00 /mnt/VolGroup00/LogVol00 ext3 users,rw 0 0 arrakis ~ # arrakis ~ # su thufir [EMAIL PROTECTED] /root $ cd [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ ll /mnt/VolGroup00/LogVol00/home/thufir/ ls: cannot open directory /mnt/VolGroup00/LogVol00/home/thufir/: Permission denied [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ whoami thufir [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ ll /home/thufir/Desktop/ total 0 [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ date Mon Oct 8 01:16:52 PDT 2007 [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ arrakis ~ # arrakis ~ # fdisk /dev/hda The number of cylinders for this disk is set to 9729. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Command (m for help): p Disk /dev/hda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hda1 1 1912 15358108+ 83 Linux /dev/hda2 1913 1925 104422+ 83 Linux /dev/hda3 1926 9729 62685630 8e Linux LVM Command (m for help): q arrakis ~ # arrakis ~ # fdisk /dev/hdb The number of cylinders for this disk is set to 59582. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Command (m for help): p Disk /dev/hdb: 30.7 GB, 30750031872 bytes 16 heads, 63 sectors/track, 59582 cylinders Units = cylinders of 1008 * 512 = 516096 bytes Device Boot Start End Blocks Id System /dev/hdb1 1 203 102280+ 83 Linux /dev/hdb2 204 2109 960624 82 Linux swap / Solaris /dev/hdb3 2110 59579 28964880 83 Linux Command (m for help): q arrakis ~ # arrakis ~ # cat lvm.txt #load device module modprobe dm-mod #change the volumes that exist to active vgchange -ay #mount the logical partition mkdir -p /mnt/VolGroup00/LogVol00 mount /dev/VolGroup00/LogVol00 /mnt/VolGroup00/LogVol00 arrakis ~ # arrakis ~ # cat /etc/fstab /dev/hdb1 /boot ext2 defaults 1 2 /dev/hdb2 none swap sw 0 0 /dev/hdb3 / ext3 noatime 0 1 none /proc proc defaults 0 0 none /dev/shm tmpfs defaults 0 0 /dev/VolGroup00/LogVol00 /mnt/VolGroup00/LogVol00 ext3 users,rw 0 0 arrakis ~ # arrakis ~ # su thufir [EMAIL PROTECTED] /root $ cd [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ ll /mnt/VolGroup00/LogVol00/home/thufir/ ls: cannot open directory /mnt/VolGroup00/LogVol00/home/thufir/: Permission denied [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ whoami thufir [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ ll /home/thufir/Desktop/ total 0 [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ date Mon Oct 8 01:16:52 PDT 2007 [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ arrakis ~ # arrakis ~ # fdisk /dev/hda The number of cylinders for this disk is set to 9729. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Command (m for help): p Disk /dev/hda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hda1 1 1912 15358108+ 83 Linux /dev/hda2 1913 1925 104422+ 83 Linux /dev/hda3 1926 9729 62685630 8e Linux LVM Command (m for help): q arrakis ~ # arrakis ~ # fdisk /dev/hdb The number of cylinders for this disk is set to 59582. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Command (m for help): p Disk /dev/hdb: 30.7 GB, 30750031872 bytes 16 heads, 63 sectors/track, 59582 cylinders Units = cylinders of 1008 * 512 = 516096 bytes Device Boot Start End Blocks Id System /dev/hdb1 1 203 102280+ 83 Linux /dev/hdb2 204 2109 960624 82 Linux swap / Solaris /dev/hdb3 2110 59579 28964880 83 Linux Command (m for help): q arrakis ~ # arrakis ~ # cat lvm.txt #load device module modprobe dm-mod #change the volumes that exist to active vgchange -ay #mount the logical partition mkdir -p /mnt/VolGroup00/LogVol00 mount /dev/VolGroup00/LogVol00 /mnt/VolGroup00/LogVol00 arrakis ~ # arrakis ~ # cat /etc/fstab /dev/hdb1 /boot ext2 defaults 1 2 /dev/hdb2 none swap sw 0 0 /dev/hdb3 / ext3 noatime 0 1 none /proc proc defaults 0 0 none /dev/shm tmpfs defaults 0 0 /dev/VolGroup00/LogVol00 /mnt/VolGroup00/LogVol00 ext3 users,rw 0 0 arrakis ~ # arrakis ~ # su thufir [EMAIL PROTECTED] /root $ cd [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ ll /mnt/VolGroup00/LogVol00/home/thufir/ ls: cannot open directory /mnt/VolGroup00/LogVol00/home/thufir/: Permission denied [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ whoami thufir [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ ll /home/thufir/Desktop/ total 0 [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ date Mon Oct 8 01:16:52 PDT 2007 [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ arrakis ~ # arrakis ~ # fdisk /dev/hda The number of cylinders for this disk is set to 9729. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Command (m for help): p Disk /dev/hda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hda1 1 1912 15358108+ 83 Linux /dev/hda2 1913 1925 104422+ 83 Linux /dev/hda3 1926 9729 62685630 8e Linux LVM Command (m for help): q arrakis ~ # arrakis ~ # fdisk /dev/hdb The number of cylinders for this disk is set to 59582. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Command (m for help): p Disk /dev/hdb: 30.7 GB, 30750031872 bytes 16 heads, 63 sectors/track, 59582 cylinders Units = cylinders of 1008 * 512 = 516096 bytes Device Boot Start End Blocks Id System /dev/hdb1 1 203 102280+ 83 Linux /dev/hdb2 204 2109 960624 82 Linux swap / Solaris /dev/hdb3 2110 59579 28964880 83 Linux Command (m for help): q arrakis ~ # arrakis ~ # cat lvm.txt #load device module modprobe dm-mod #change the volumes that exist to active vgchange -ay #mount the logical partition mkdir -p /mnt/VolGroup00/LogVol00 mount /dev/VolGroup00/LogVol00 /mnt/VolGroup00/LogVol00 arrakis ~ # arrakis ~ # cat /etc/fstab /dev/hdb1 /boot ext2 defaults 1 2 /dev/hdb2 none swap sw 0 0 /dev/hdb3 / ext3 noatime 0 1 none /proc proc defaults 0 0 none /dev/shm tmpfs defaults 0 0 /dev/VolGroup00/LogVol00 /mnt/VolGroup00/LogVol00 ext3 users,rw 0 0 arrakis ~ # arrakis ~ # su thufir [EMAIL PROTECTED] /root $ cd [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ ll /mnt/VolGroup00/LogVol00/home/thufir/ ls: cannot open directory /mnt/VolGroup00/LogVol00/home/thufir/: Permission denied [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ whoami thufir [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ ll /home/thufir/Desktop/ total 0 [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ date Mon Oct 8 01:16:52 PDT 2007 [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ arrakis ~ # arrakis ~ # fdisk /dev/hda The number of cylinders for this disk is set to 9729. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Command (m for help): p Disk /dev/hda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hda1 1 1912 15358108+ 83 Linux /dev/hda2 1913 1925 104422+ 83 Linux /dev/hda3 1926 9729 62685630 8e Linux LVM Command (m for help): q arrakis ~ # arrakis ~ # fdisk /dev/hdb The number of cylinders for this disk is set to 59582. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Command (m for help): p Disk /dev/hdb: 30.7 GB, 30750031872 bytes 16 heads, 63 sectors/track, 59582 cylinders Units = cylinders of 1008 * 512 = 516096 bytes Device Boot Start End Blocks Id System /dev/hdb1 1 203 102280+ 83 Linux /dev/hdb2 204 2109 960624 82 Linux swap / Solaris /dev/hdb3 2110 59579 28964880 83 Linux Command (m for help): q arrakis ~ # arrakis ~ # cat lvm.txt #load device module modprobe dm-mod #change the volumes that exist to active vgchange -ay #mount the logical partition mkdir -p /mnt/VolGroup00/LogVol00 mount /dev/VolGroup00/LogVol00 /mnt/VolGroup00/LogVol00 arrakis ~ # arrakis ~ # cat /etc/fstab /dev/hdb1 /boot ext2 defaults 1 2 /dev/hdb2 none swap sw 0 0 /dev/hdb3 / ext3 noatime 0 1 none /proc proc defaults 0 0 none /dev/shm tmpfs defaults 0 0 /dev/VolGroup00/LogVol00 /mnt/VolGroup00/LogVol00 ext3 users,rw 0 0 arrakis ~ # arrakis ~ # su thufir [EMAIL PROTECTED] /root $ cd [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ ll /mnt/VolGroup00/LogVol00/home/thufir/ ls: cannot open directory /mnt/VolGroup00/LogVol00/home/thufir/: Permission denied [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ whoami thufir [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ ll /home/thufir/Desktop/ total 0 [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ date Mon Oct 8 01:16:52 PDT 2007 [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ arrakis ~ # arrakis ~ # fdisk /dev/hda The number of cylinders for this disk is set to 9729. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Command (m for help): p Disk /dev/hda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hda1 1 1912 15358108+ 83 Linux /dev/hda2 1913 1925 104422+ 83 Linux /dev/hda3 1926 9729 62685630 8e Linux LVM Command (m for help): q arrakis ~ # arrakis ~ # fdisk /dev/hdb The number of cylinders for this disk is set to 59582. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Command (m for help): p Disk /dev/hdb: 30.7 GB, 30750031872 bytes 16 heads, 63 sectors/track, 59582 cylinders Units = cylinders of 1008 * 512 = 516096 bytes Device Boot Start End Blocks Id System /dev/hdb1 1 203 102280+ 83 Linux /dev/hdb2 204 2109 960624 82 Linux swap / Solaris /dev/hdb3 2110 59579 28964880 83 Linux Command (m for help): q arrakis ~ # arrakis ~ # cat lvm.txt #load device module modprobe dm-mod #change the volumes that exist to active vgchange -ay #mount the logical partition mkdir -p /mnt/VolGroup00/LogVol00 mount /dev/VolGroup00/LogVol00 /mnt/VolGroup00/LogVol00 arrakis ~ # arrakis ~ # cat /etc/fstab /dev/hdb1 /boot ext2 defaults 1 2 /dev/hdb2 none swap sw 0 0 /dev/hdb3 / ext3 noatime 0 1 none /proc proc defaults 0 0 none /dev/shm tmpfs defaults 0 0 /dev/VolGroup00/LogVol00 /mnt/VolGroup00/LogVol00 ext3 users,rw 0 0 arrakis ~ # arrakis ~ # su thufir [EMAIL PROTECTED] /root $ cd [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ ll /mnt/VolGroup00/LogVol00/home/thufir/ ls: cannot open directory /mnt/VolGroup00/LogVol00/home/thufir/: Permission denied [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ whoami thufir [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ ll /home/thufir/Desktop/ total 0 [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ date Mon Oct 8 01:16:52 PDT 2007 [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ arrakis ~ # arrakis ~ # fdisk /dev/hda The number of cylinders for this disk is set to 9729. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Command (m for help): p Disk /dev/hda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hda1 1 1912 15358108+ 83 Linux /dev/hda2 1913 1925 104422+ 83 Linux /dev/hda3 1926 9729 62685630 8e Linux LVM Command (m for help): q arrakis ~ # arrakis ~ # fdisk /dev/hdb The number of cylinders for this disk is set to 59582. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Command (m for help): p Disk /dev/hdb: 30.7 GB, 30750031872 bytes 16 heads, 63 sectors/track, 59582 cylinders Units = cylinders of 1008 * 512 = 516096 bytes Device Boot Start End Blocks Id System /dev/hdb1 1 203 102280+ 83 Linux /dev/hdb2 204 2109 960624 82 Linux swap / Solaris /dev/hdb3 2110 59579 28964880 83 Linux Command (m for help): q arrakis ~ # arrakis ~ # cat lvm.txt #load device module modprobe dm-mod #change the volumes that exist to active vgchange -ay #mount the logical partition mkdir -p /mnt/VolGroup00/LogVol00 mount /dev/VolGroup00/LogVol00 /mnt/VolGroup00/LogVol00 arrakis ~ # arrakis ~ # cat /etc/fstab /dev/hdb1 /boot ext2 defaults 1 2 /dev/hdb2 none swap sw 0 0 /dev/hdb3 / ext3 noatime 0 1 none /proc proc defaults 0 0 none /dev/shm tmpfs defaults 0 0 /dev/VolGroup00/LogVol00 /mnt/VolGroup00/LogVol00 ext3 users,rw 0 0 arrakis ~ # arrakis ~ # su thufir [EMAIL PROTECTED] /root $ cd [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ ll /mnt/VolGroup00/LogVol00/home/thufir/ ls: cannot open directory /mnt/VolGroup00/LogVol00/home/thufir/: Permission denied [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ whoami thufir [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ ll /home/thufir/Desktop/ total 0 [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ date Mon Oct 8 01:16:52 PDT 2007 [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ arrakis ~ # arrakis ~ # fdisk /dev/hda The number of cylinders for this disk is set to 9729. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Command (m for help): p Disk /dev/hda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hda1 1 1912 15358108+ 83 Linux /dev/hda2 1913 1925 104422+ 83 Linux /dev/hda3 1926 9729 62685630 8e Linux LVM Command (m for help): q arrakis ~ # arrakis ~ # fdisk /dev/hdb The number of cylinders for this disk is set to 59582. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Command (m for help): p Disk /dev/hdb: 30.7 GB, 30750031872 bytes 16 heads, 63 sectors/track, 59582 cylinders Units = cylinders of 1008 * 512 = 516096 bytes Device Boot Start End Blocks Id System /dev/hdb1 1 203 102280+ 83 Linux /dev/hdb2 204 2109 960624 82 Linux swap / Solaris /dev/hdb3 2110 59579 28964880 83 Linux Command (m for help): q arrakis ~ # arrakis ~ # cat lvm.txt #load device module modprobe dm-mod #change the volumes that exist to active vgchange -ay #mount the logical partition mkdir -p /mnt/VolGroup00/LogVol00 mount /dev/VolGroup00/LogVol00 /mnt/VolGroup00/LogVol00 arrakis ~ # arrakis ~ # cat /etc/fstab /dev/hdb1 /boot ext2 defaults 1 2 /dev/hdb2 none swap sw 0 0 /dev/hdb3 / ext3 noatime 0 1 none /proc proc defaults 0 0 none /dev/shm tmpfs defaults 0 0 /dev/VolGroup00/LogVol00 /mnt/VolGroup00/LogVol00 ext3 users,rw 0 0 arrakis ~ # arrakis ~ # su thufir [EMAIL PROTECTED] /root $ cd [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ ll /mnt/VolGroup00/LogVol00/home/thufir/ ls: cannot open directory /mnt/VolGroup00/LogVol00/home/thufir/: Permission denied [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ whoami thufir [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ ll /home/thufir/Desktop/ total 0 [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ date Mon Oct 8 01:16:52 PDT 2007 [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ arrakis ~ # arrakis ~ # fdisk /dev/hda The number of cylinders for this disk is set to 9729. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Command (m for help): p Disk /dev/hda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hda1 1 1912 15358108+ 83 Linux /dev/hda2 1913 1925 104422+ 83 Linux /dev/hda3 1926 9729 62685630 8e Linux LVM Command (m for help): q arrakis ~ # arrakis ~ # fdisk /dev/hdb The number of cylinders for this disk is set to 59582. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Command (m for help): p Disk /dev/hdb: 30.7 GB, 30750031872 bytes 16 heads, 63 sectors/track, 59582 cylinders Units = cylinders of 1008 * 512 = 516096 bytes Device Boot Start End Blocks Id System /dev/hdb1 1 203 102280+ 83 Linux /dev/hdb2 204 2109 960624 82 Linux swap / Solaris /dev/hdb3 2110 59579 28964880 83 Linux Command (m for help): q arrakis ~ # arrakis ~ # cat lvm.txt #load device module modprobe dm-mod #change the volumes that exist to active vgchange -ay #mount the logical partition mkdir -p /mnt/VolGroup00/LogVol00 mount /dev/VolGroup00/LogVol00 /mnt/VolGroup00/LogVol00 arrakis ~ # arrakis ~ # cat /etc/fstab /dev/hdb1 /boot ext2 defaults 1 2 /dev/hdb2 none swap sw 0 0 /dev/hdb3 / ext3 noatime 0 1 none /proc proc defaults 0 0 none /dev/shm tmpfs defaults 0 0 /dev/VolGroup00/LogVol00 /mnt/VolGroup00/LogVol00 ext3 users,rw 0 0 arrakis ~ # arrakis ~ # su thufir [EMAIL PROTECTED] /root $ cd [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ ll /mnt/VolGroup00/LogVol00/home/thufir/ ls: cannot open directory /mnt/VolGroup00/LogVol00/home/thufir/: Permission denied [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ whoami thufir [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ ll /home/thufir/Desktop/ total 0 [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ date Mon Oct 8 01:16:52 PDT 2007 [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ arrakis ~ # arrakis ~ # fdisk /dev/hda The number of cylinders for this disk is set to 9729. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Command (m for help): p Disk /dev/hda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hda1 1 1912 15358108+ 83 Linux /dev/hda2 1913 1925 104422+ 83 Linux /dev/hda3 1926 9729 62685630 8e Linux LVM Command (m for help): q arrakis ~ # arrakis ~ # fdisk /dev/hdb The number of cylinders for this disk is set to 59582. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Command (m for help): p Disk /dev/hdb: 30.7 GB, 30750031872 bytes 16 heads, 63 sectors/track, 59582 cylinders Units = cylinders of 1008 * 512 = 516096 bytes Device Boot Start End Blocks Id System /dev/hdb1 1 203 102280+ 83 Linux /dev/hdb2 204 2109 960624 82 Linux swap / Solaris /dev/hdb3 2110 59579 28964880 83 Linux Command (m for help): q arrakis ~ # arrakis ~ # cat lvm.txt #load device module modprobe dm-mod #change the volumes that exist to active vgchange -ay #mount the logical partition mkdir -p /mnt/VolGroup00/LogVol00 mount /dev/VolGroup00/LogVol00 /mnt/VolGroup00/LogVol00 arrakis ~ # arrakis ~ # cat /etc/fstab /dev/hdb1 /boot ext2 defaults 1 2 /dev/hdb2 none swap sw 0 0 /dev/hdb3 / ext3 noatime 0 1 none /proc proc defaults 0 0 none /dev/shm tmpfs defaults 0 0 /dev/VolGroup00/LogVol00 /mnt/VolGroup00/LogVol00 ext3 users,rw 0 0 arrakis ~ # arrakis ~ # su thufir [EMAIL PROTECTED] /root $ cd [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ ll /mnt/VolGroup00/LogVol00/home/thufir/ ls: cannot open directory /mnt/VolGroup00/LogVol00/home/thufir/: Permission denied [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ whoami thufir [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ ll /home/thufir/Desktop/ total 0 [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ date Mon Oct 8 01:16:52 PDT 2007 [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ arrakis ~ # arrakis ~ # fdisk /dev/hda The number of cylinders for this disk is set to 9729. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Command (m for help): p Disk /dev/hda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hda1 1 1912 15358108+ 83 Linux /dev/hda2 1913 1925 104422+ 83 Linux /dev/hda3 1926 9729 62685630 8e Linux LVM Command (m for help): q arrakis ~ # arrakis ~ # fdisk /dev/hdb The number of cylinders for this disk is set to 59582. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Command (m for help): p Disk /dev/hdb: 30.7 GB, 30750031872 bytes 16 heads, 63 sectors/track, 59582 cylinders Units = cylinders of 1008 * 512 = 516096 bytes Device Boot Start End Blocks Id System /dev/hdb1 1 203 102280+ 83 Linux /dev/hdb2 204 2109 960624 82 Linux swap / Solaris /dev/hdb3 2110 59579 28964880 83 Linux Command (m for help): q arrakis ~ # arrakis ~ # cat lvm.txt #load device module modprobe dm-mod #change the volumes that exist to active vgchange -ay #mount the logical partition mkdir -p /mnt/VolGroup00/LogVol00 mount /dev/VolGroup00/LogVol00 /mnt/VolGroup00/LogVol00 arrakis ~ # arrakis ~ # cat /etc/fstab /dev/hdb1 /boot ext2 defaults 1 2 /dev/hdb2 none swap sw 0 0 /dev/hdb3 / ext3 noatime 0 1 none /proc proc defaults 0 0 none /dev/shm tmpfs defaults 0 0 /dev/VolGroup00/LogVol00 /mnt/VolGroup00/LogVol00 ext3 users,rw 0 0 arrakis ~ # arrakis ~ # su thufir [EMAIL PROTECTED] /root $ cd [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ ll /mnt/VolGroup00/LogVol00/home/thufir/ ls: cannot open directory /mnt/VolGroup00/LogVol00/home/thufir/: Permission denied [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ whoami thufir [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ ll /home/thufir/Desktop/ total 0 [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ date Mon Oct 8 01:16:52 PDT 2007 [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ arrakis ~ # arrakis ~ # fdisk /dev/hda The number of cylinders for this disk is set to 9729. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Command (m for help): p Disk /dev/hda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hda1 1 1912 15358108+ 83 Linux /dev/hda2 1913 1925 104422+ 83 Linux /dev/hda3 1926 9729 62685630 8e Linux LVM Command (m for help): q arrakis ~ # arrakis ~ # fdisk /dev/hdb The number of cylinders for this disk is set to 59582. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Command (m for help): p Disk /dev/hdb: 30.7 GB, 30750031872 bytes 16 heads, 63 sectors/track, 59582 cylinders Units = cylinders of 1008 * 512 = 516096 bytes Device Boot Start End Blocks Id System /dev/hdb1 1 203 102280+ 83 Linux /dev/hdb2 204 2109 960624 82 Linux swap / Solaris /dev/hdb3 2110 59579 28964880 83 Linux Command (m for help): q arrakis ~ # arrakis ~ # cat lvm.txt #load device module modprobe dm-mod #change the volumes that exist to active vgchange -ay #mount the logical partition mkdir -p /mnt/VolGroup00/LogVol00 mount /dev/VolGroup00/LogVol00 /mnt/VolGroup00/LogVol00 arrakis ~ # arrakis ~ # cat /etc/fstab /dev/hdb1 /boot ext2 defaults 1 2 /dev/hdb2 none swap sw 0 0 /dev/hdb3 / ext3 noatime 0 1 none /proc proc defaults 0 0 none /dev/shm tmpfs defaults 0 0 /dev/VolGroup00/LogVol00 /mnt/VolGroup00/LogVol00 ext3 users,rw 0 0 arrakis ~ # arrakis ~ # su thufir [EMAIL PROTECTED] /root $ cd [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ ll /mnt/VolGroup00/LogVol00/home/thufir/ ls: cannot open directory /mnt/VolGroup00/LogVol00/home/thufir/: Permission denied [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ whoami thufir [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ ll /home/thufir/Desktop/ total 0 [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ date Mon Oct 8 01:16:52 PDT 2007 [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ arrakis ~ # arrakis ~ # fdisk /dev/hda The number of cylinders for this disk is set to 9729. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Command (m for help): p Disk /dev/hda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hda1 1 1912 15358108+ 83 Linux /dev/hda2 1913 1925 104422+ 83 Linux /dev/hda3 1926 9729 62685630 8e Linux LVM Command (m for help): q arrakis ~ # arrakis ~ # fdisk /dev/hdb The number of cylinders for this disk is set to 59582. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Command (m for help): p Disk /dev/hdb: 30.7 GB, 30750031872 bytes 16 heads, 63 sectors/track, 59582 cylinders Units = cylinders of 1008 * 512 = 516096 bytes Device Boot Start End Blocks Id System /dev/hdb1 1 203 102280+ 83 Linux /dev/hdb2 204 2109 960624 82 Linux swap / Solaris /dev/hdb3 2110 59579 28964880 83 Linux Command (m for help): q arrakis ~ # arrakis ~ # cat lvm.txt #load device module modprobe dm-mod #change the volumes that exist to active vgchange -ay #mount the logical partition mkdir -p /mnt/VolGroup00/LogVol00 mount /dev/VolGroup00/LogVol00 /mnt/VolGroup00/LogVol00 arrakis ~ # arrakis ~ # cat /etc/fstab /dev/hdb1 /boot ext2 defaults 1 2 /dev/hdb2 none swap sw 0 0 /dev/hdb3 / ext3 noatime 0 1 none /proc proc defaults 0 0 none /dev/shm tmpfs defaults 0 0 /dev/VolGroup00/LogVol00 /mnt/VolGroup00/LogVol00 ext3 users,rw 0 0 arrakis ~ # arrakis ~ # su thufir [EMAIL PROTECTED] /root $ cd [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ ll /mnt/VolGroup00/LogVol00/home/thufir/ ls: cannot open directory /mnt/VolGroup00/LogVol00/home/thufir/: Permission denied [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ whoami thufir [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ ll /home/thufir/Desktop/ total 0 [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ date Mon Oct 8 01:16:52 PDT 2007 [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ arrakis ~ # arrakis ~ # fdisk /dev/hda The number of cylinders for this disk is set to 9729. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Command (m for help): p Disk /dev/hda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hda1 1 1912 15358108+ 83 Linux /dev/hda2 1913 1925 104422+ 83 Linux /dev/hda3 1926 9729 62685630 8e Linux LVM Command (m for help): q arrakis ~ # arrakis ~ # fdisk /dev/hdb The number of cylinders for this disk is set to 59582. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Command (m for help): p Disk /dev/hdb: 30.7 GB, 30750031872 bytes 16 heads, 63 sectors/track, 59582 cylinders Units = cylinders of 1008 * 512 = 516096 bytes Device Boot Start End Blocks Id System /dev/hdb1 1 203 102280+ 83 Linux /dev/hdb2 204 2109 960624 82 Linux swap / Solaris /dev/hdb3 2110 59579 28964880 83 Linux Command (m for help): q arrakis ~ # arrakis ~ # cat lvm.txt #load device module modprobe dm-mod #change the volumes that exist to active vgchange -ay #mount the logical partition mkdir -p /mnt/VolGroup00/LogVol00 mount /dev/VolGroup00/LogVol00 /mnt/VolGroup00/LogVol00 arrakis ~ # arrakis ~ # cat /etc/fstab /dev/hdb1 /boot ext2 defaults 1 2 /dev/hdb2 none swap sw 0 0 /dev/hdb3 / ext3 noatime 0 1 none /proc proc defaults 0 0 none /dev/shm tmpfs defaults 0 0 /dev/VolGroup00/LogVol00 /mnt/VolGroup00/LogVol00 ext3 users,rw 0 0 arrakis ~ # arrakis ~ # su thufir [EMAIL PROTECTED] /root $ cd [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ ll /mnt/VolGroup00/LogVol00/home/thufir/ ls: cannot open directory /mnt/VolGroup00/LogVol00/home/thufir/: Permission denied [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ whoami thufir [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ date Mon Oct 8 01:16:52 PDT 2007 [EMAIL PROTECTED] ~ $ [EMAIL PROTECTED] ~ $ thanks, Thufir -- [EMAIL PROTECTED] mailing list