Thank you!
________________________________
From: Jonathan Moules <jonathanmou...@warwickshire.gov.uk>
To: Mark Loper <mark_a_lo...@yahoo.com>
Cc: Geoserver <Geoserver-users@lists.sourceforge.net>
Sent: Thursday, July 25, 2013 5:56 AM
Subject: Re: [Geoserver-users] Hardware Recomendations
Hi Mark,
This question gets asked a lot. You can browse previous answers here:
http://osgeo-org.1560.x6.nabble.com/template/NamlServlet.jtp?query=hardware&node=3786390¯o=search_page
They should hopefully give you a broader picture.
Cheers,
Jonathan
On 24 July 2013 19:22, Mark Loper <mark_a_lo...@yahoo.com> wrote:
All,
>
>
> I'm trying to write a small white paper covering most everything to do with
>a Open Geo installation. The installation will be in an environment basically
>focused on WFS rendering. The plan is to use Open Geo to render the features
>to improve performance in OpenLayers. Currently we're using KML responses
>directly from the WFS servers which can take several minutes to render. We're
>getting around 100K to 200K features in a response so asking OpenLayers to
>render that is slow. I need to know what the recommended hardware
>configuration would be to optimize performance. The initial install will be a
>a single node much like MassGIS has set up. If it does the job functionally
>we would scale out to several nodes. That said, I need to be successful up
>front. All the documentation I can find talks about the minimum needed. I
>want to know the best, not the minimum. I'm looking for Cores, Ram, Disk
>Space.
>Parameters:
>Requests are generally around 75K features.
> Responses are usually Tiled WMS-C or WMTS.
> Features consist of Polygons and points,
> 30 concurrent users.
> Caching is valid for 30 minutes.
> No more than an initial 100 layers of data.
> Windows 2008R2 Servers (virtual)
>
>
>My Thoughts:
> 4 Cores
> 16GB Ram
> 800GB Disk
>
>
>Thoughts?Mark
>------------------------------------------------------------------------------
>See everything from the browser to the database with AppDynamics
>Get end-to-end visibility with application monitoring from AppDynamics
>Isolate bottlenecks and diagnose root cause in seconds.
>Start your free trial of AppDynamics Pro today!
>http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk
>_______________________________________________
>Geoserver-users mailing list
>Geoserver-users@lists.sourceforge.net
>https://lists.sourceforge.net/lists/listinfo/geoserver-users
>
>
This transmission is intended for the named addressee(s) only and may contain
sensitive or protectively marked material up to RESTRICTED and should be
handled accordingly. Unless you are the named addressee (or authorised to
receive it for the addressee) you may not copy or use it, or disclose it to
anyone else. If you have received this transmission in error please notify the
sender immediately. All email traffic sent to or from us, including without
limitation all GCSX traffic, may be subject to recording and/or monitoring in
accordance with relevant legislation.
------------------------------------------------------------------------------
See everything from the browser to the database with AppDynamics
Get end-to-end visibility with application monitoring from AppDynamics
Isolate bottlenecks and diagnose root cause in seconds.
Start your free trial of AppDynamics Pro today!
http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk
_______________________________________________
Geoserver-users mailing list
Geoserver-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/geoserver-users
