Hi,
That feels odd. Unfortunately without URL to that server it is hard to help you
farther. Try to find some public ShapMap server which behaves similarly, or
test if you can repeat the issue with http://demo.opengeo.org/geoserver/wms or
http://demo.mapserver.org/wms.
Do not test with Geoserver 2.6-RC1 because it has other problems with cascading
WMS. GS 2.5.2 has worked OK in my limited tests.
-Jukka Rahkonen-
Edward Mac Gillavry wrote:
That's right: the GetMap URL does not contain any reference to a version
number, not even 1.1.1.
Edward
________________________________
From: jukka.rahko...@mmmtike.fi<mailto:jukka.rahko...@mmmtike.fi>
To: emacgilla...@hotmail.com<mailto:emacgilla...@hotmail.com>
CC:
geoserver-users@lists.sourceforge.net<mailto:geoserver-users@lists.sourceforge.net>
Subject: Re: [Geoserver-users] Config cascading WMS 1.3: Capabilities req
params overruled
Date: Thu, 4 Sep 2014 13:51:16 +0000
And the GetMap url in server GetCapabilities does not contain that
&version=1.1.1 part?
-Jukka Rahkonen-
Lähettäjä: Edward Mac Gillavry [mailto:emacgilla...@hotmail.com]
Lähetetty: 4. syyskuuta 2014 16:48
Vastaanottaja: Andrea Aime; Rahkonen Jukka (Tike)
Kopio:
Geoserver-users@lists.sourceforge.net<mailto:Geoserver-users@lists.sourceforge.net>
Aihe: RE: [Geoserver-users] Config cascading WMS 1.3: Capabilities req params
overruled
Hi,
Thanks for your pointers. The upstream WMS server (SharpMap) ONLY supports WMS
1.3. Sending a proper, full GetCapabilities request version 1.3 to the upstream
WMS server using wget or the web browser, I get the proper document in response.
The "client" here is GeoServer, as I am configuring the upstream WMS as a store
in the GS management interface with the exact same GetCapabilities URL for
version 1.3. Upon adding layers, GS appears to hijack the request tagging
version 1.1.1 onto the end of the request.
No INSPIRE metadata is involved in the exchange.
Hope this makes it more clear.
Thanks in advance,
Edward
________________________________
Date: Thu, 4 Sep 2014 15:25:04 +0200
Subject: Re: [Geoserver-users] Config cascading WMS 1.3: Capabilities req
params overruled
From: andrea.a...@geo-solutions.it<mailto:andrea.a...@geo-solutions.it>
To: jukka.rahko...@mmmtike.fi<mailto:jukka.rahko...@mmmtike.fi>
CC: emacgilla...@hotmail.com<mailto:emacgilla...@hotmail.com>;
geoserver-users@lists.sourceforge.net<mailto:geoserver-users@lists.sourceforge.net>
On Thu, Sep 4, 2014 at 3:12 PM, Rahkonen Jukka (Tike)
<jukka.rahko...@mmmtike.fi<mailto:jukka.rahko...@mmmtike.fi>> wrote:
Hi,
Please check what you get back from the remote server if you send a
GetCapabilities request with &VERSION=1.3.0. I bet it is sending back a
document in WMS 1.1.1 format because it does not support WMS 1.3.0. After that
Geoserver continues discussion with the WFS 1.1.1 protocol. This is by design
and build in into WMS standard. Read more about version negotiation from the
WMS 1.3.0 standard, it begins from page 10.
It may also be that the client fails to deal with the 1.3.0 capabilities
document returned, and falls back to 1.1.1.
I remember issues cascading servers exposing the INSPIRE extra metadata for
example, that was solved at some point, but can't exactly remember when
Cheers
Andrea
--
==
GeoServer Professional Services from the experts! Visit
http://goo.gl/NWWaa2 for more information.
==
Ing. Andrea Aime
@geowolf
Technical Lead
GeoSolutions S.A.S.
Via Poggio alle Viti 1187
55054 Massarosa (LU)
Italy
phone: +39 0584 962313
fax: +39 0584 1660272
mob: +39 339 8844549
http://www.geo-solutions.it
http://twitter.com/geosolutions_it
-------------------------------------------------------
------------------------------------------------------------------------------
Slashdot TV.
Video for Nerds. Stuff that matters.
http://tv.slashdot.org/
_______________________________________________
Geoserver-users mailing list
Geoserver-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/geoserver-users