Hi Bob,
please keep the mailing list in the loop.
Can you also please share your stderrout log?
Is the one containing info about whether GDAL has been properly loaded or
not.
I have no feedbacks about the URL conversion DEBUG message but I think is a
simple DEBUG message reported by some callback mechanism which is not
reporting anything critical (moreover it isn't related to the GDAL loading
issue)
Hoping some other developers can chime in to provide more info on that if
needed.
Cheers,
Daniele
==
GeoServer Professional Services from the experts! Visit
http://goo.gl/NWWaa2 for more information.
==
Ing. Daniele Romagnoli
Senior Software Engineer
GeoSolutions S.A.S.
Via Poggio alle Viti 1187
55054 Massarosa (LU)
Italy
phone: +39 0584 962313
fax: +39 0584 1660272
http://www.geo-solutions.it
http://twitter.com/geosolutions_it
-------------------------------------------------------
*AVVERTENZE AI SENSI DEL D.Lgs. 196/2003*
Le informazioni contenute in questo messaggio di posta elettronica e/o
nel/i file/s allegato/i sono da considerarsi strettamente riservate. Il
loro utilizzo è consentito esclusivamente al destinatario del messaggio,
per le finalità indicate nel messaggio stesso. Qualora riceviate questo
messaggio senza esserne il destinatario, Vi preghiamo cortesemente di
darcene notizia via e-mail e di procedere alla distruzione del messaggio
stesso, cancellandolo dal Vostro sistema. Conservare il messaggio stesso,
divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo, od
utilizzarlo per finalità diverse, costituisce comportamento contrario ai
principi dettati dal D.Lgs. 196/2003.
The information in this message and/or attachments, is intended solely for
the attention and use of the named addressee(s) and may be confidential or
proprietary in nature or covered by the provisions of privacy act
(Legislative Decree June, 30 2003, no.196 - Italy's New Data Protection
Code).Any use not in accord with its purpose, any disclosure, reproduction,
copying, distribution, or either dissemination, either whole or partial, is
strictly forbidden except previous formal approval of the named
addressee(s). If you are not the intended recipient, please contact
immediately the sender by telephone, fax or e-mail and delete the
information in this message that has been received in error. The sender
does not give any warranty or accept liability as the content, accuracy or
completeness of sent messages and accepts no responsibility for changes
made after they were sent or for other risks which arise as a result of
e-mail transmission, viruses, etc.
On Tue, Jan 20, 2015 at 3:59 PM, Bistrais, Bob <bob.bistr...@maine.gov>
wrote:
> Hello Daniele,
>
>
>
> Sorry I did not reply sooner, I was out of the office for the past few
> days. I have added the GDAL DLL’s to the Path variable. I still get
> errors, but I see this at the beginning of the stack trace. This seems to
> indicate that GeoSever is not able to convert a URL? Here is the beginning
> of the error message, I have attached the complete message.
>
>
>
> Thank you again,
>
> Bob
>
>
>
> 2015-01-20 09:50:29,311 TRACE [org.geoserver.ows.OWSHandlerMapping] - No
> handler mapping found for [/web/]
>
> 2015-01-20 09:50:29,311 TRACE [org.geoserver.ows.OWSHandlerMapping] - No
> handler mapping found for [/web/]
>
> 2015-01-20 09:50:29,311 TRACE [org.geoserver.ows.OWSHandlerMapping] - No
> handler mapping found for [/web/]
>
> 2015-01-20 09:50:29,311 TRACE [org.geoserver.ows.OWSHandlerMapping] - No
> handler mapping found for [/web/]
>
> 2015-01-20 09:50:29,312 DEBUG [org.geoserver] - Thread 12 locking in mode
> WRITE
>
> 2015-01-20 09:50:29,312 DEBUG [org.geoserver] - Thread 12 got the lock in
> mode WRITE
>
> 2015-01-20 09:50:29,323 DEBUG [org.geoserver.web] - cannot convert url:
> jar:file:/C:/Program%20Files%20(x86)/Boundless/OpenGeo/jetty/webapps/geoserver/WEB-INF/lib/gs-web-core-2.6-SNAPSHOT.jar!/org/geoserver/web/css/blueprint/screen.css
> to file (URI is not hierarchical), falling back to the inputstream for
> polling
>
> 2015-01-20 09:50:29,324 DEBUG [org.geoserver.web] - cannot convert url:
> jar:file:/C:/Program%20Files%20(x86)/Boundless/OpenGeo/jetty/webapps/geoserver/WEB-INF/lib/gs-web-core-2.6-SNAPSHOT.jar!/org/geoserver/web/css/blueprint/print.css
> to file (URI is not hierarchical), falling back to the inputstream for
> polling
>
> 2015-01-20 09:50:29,325 DEBUG [org.geoserver.web] - cannot convert url:
> jar:file:/C:/Program%20Files%20(x86)/Boundless/OpenGeo/jetty/webapps/geoserver/WEB-INF/lib/gs-web-core-2.6-SNAPSHOT.jar!/org/geoserver/web/css/geoserver.css
> to file (URI is not hierarchical), falling back to the inputstream for
> polling
>
>
>
>
>
>
>
> *From:* dany.geoto...@gmail.com [mailto:dany.geoto...@gmail.com] *On
> Behalf Of *Daniele Romagnoli
> *Sent:* Friday, January 16, 2015 3:29 AM
> *To:* Bistrais, Bob
> *Subject:* Re: [Geoserver-users] jp2 images will not load
>
>
>
> Hi Bob,
>
> ah ok. I was thinking you was using Tomcat.
>
> You are using Jetty instead.
>
> from your stderrout file, I see that:
>
>
>
>
>
> * Jan 15, 2015 11:36:12 AM
> it.geosolutions.imageio.gdalframework.GDALUtilities loadGDAL WARNING:
> Failed to load the GDAL native libs. This is not a problem unless you need
> to use the GDAL plugins: they won't be enabled.
> java.lang.UnsatisfiedLinkError: no gdaljni in java.library.path *
>
> Which states that the GDAL libraries aren't successfully loaded/found.
>
> I'm not familiar with Jetty so I don't know if it needs any specific
> configuration or settings.
>
> Anyway, at this point I would try adding GDAL_DRIVER_PATH (as suggested
> before) to the System environment variables (I was thinking you did this in
> some initialization script, but I don't know how things work with Jetty).
> As well as adding the GDAL DLLs folder to the main PATH environment
> variable of the system.
>
> Please, let me know.
>
> Daniele
>
>
>
>
> ==
> GeoServer Professional Services from the experts! Visit
> http://goo.gl/NWWaa2 for more information.
> ==
>
> Ing. Daniele Romagnoli
> Senior Software Engineer
>
> GeoSolutions S.A.S.
> Via Poggio alle Viti 1187
> 55054 Massarosa (LU)
> Italy
> phone: +39 0584 962313
> fax: +39 0584 1660272
>
> http://www.geo-solutions.it
> http://twitter.com/geosolutions_it
>
> -------------------------------------------------------
>
> *AVVERTENZE AI SENSI DEL D.Lgs. 196/2003*
>
> Le informazioni contenute in questo messaggio di posta elettronica e/o
> nel/i file/s allegato/i sono da considerarsi strettamente riservate. Il
> loro utilizzo è consentito esclusivamente al destinatario del messaggio,
> per le finalità indicate nel messaggio stesso. Qualora riceviate questo
> messaggio senza esserne il destinatario, Vi preghiamo cortesemente di
> darcene notizia via e-mail e di procedere alla distruzione del messaggio
> stesso, cancellandolo dal Vostro sistema. Conservare il messaggio stesso,
> divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo, od
> utilizzarlo per finalità diverse, costituisce comportamento contrario ai
> principi dettati dal D.Lgs. 196/2003.
>
>
>
> The information in this message and/or attachments, is intended solely for
> the attention and use of the named addressee(s) and may be confidential or
> proprietary in nature or covered by the provisions of privacy act
> (Legislative Decree June, 30 2003, no.196 - Italy's New Data Protection
> Code).Any use not in accord with its purpose, any disclosure, reproduction,
> copying, distribution, or either dissemination, either whole or partial, is
> strictly forbidden except previous formal approval of the named
> addressee(s). If you are not the intended recipient, please contact
> immediately the sender by telephone, fax or e-mail and delete the
> information in this message that has been received in error. The sender
> does not give any warranty or accept liability as the content, accuracy or
> completeness of sent messages and accepts no responsibility for changes
> made after they were sent or for other risks which arise as a result of
> e-mail transmission, viruses, etc.
>
>
>
>
>
> On Thu, Jan 15, 2015 at 7:00 PM, Bistrais, Bob <bob.bistr...@maine.gov>
> wrote:
>
> Hi Daniele,
>
>
>
> Here are logs from GeoServer. I am looking for Catalina log, but I’m not
> finding it. Where would I find this?
>
>
>
> Thank you very much for helping me.
>
>
>
> Bob
>
>
>
> *From:* dany.geoto...@gmail.com [mailto:dany.geoto...@gmail.com] *On
> Behalf Of *Daniele Romagnoli
> *Sent:* Thursday, January 15, 2015 11:43 AM
> *To:* Bistrais, Bob
> *Cc:* geoserver-users@lists.sourceforge.net
> *Subject:* Re: [Geoserver-users] jp2 images will not load
>
>
>
> Hi Bob,
> Could you please send me your geoserver and catalina logs?
>
> Cheers,
> Daniele
>
>
>
>
> ==
> GeoServer Professional Services from the experts! Visit
> http://goo.gl/NWWaa2 for more information.
> ==
>
> Ing. Daniele Romagnoli
> Senior Software Engineer
>
> GeoSolutions S.A.S.
> Via Poggio alle Viti 1187
> 55054 Massarosa (LU)
> Italy
> phone: +39 0584 962313
> fax: +39 0584 1660272
>
> http://www.geo-solutions.it
> http://twitter.com/geosolutions_it
>
> -------------------------------------------------------
>
> *AVVERTENZE AI SENSI DEL D.Lgs. 196/2003*
>
> Le informazioni contenute in questo messaggio di posta elettronica e/o
> nel/i file/s allegato/i sono da considerarsi strettamente riservate. Il
> loro utilizzo è consentito esclusivamente al destinatario del messaggio,
> per le finalità indicate nel messaggio stesso. Qualora riceviate questo
> messaggio senza esserne il destinatario, Vi preghiamo cortesemente di
> darcene notizia via e-mail e di procedere alla distruzione del messaggio
> stesso, cancellandolo dal Vostro sistema. Conservare il messaggio stesso,
> divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo, od
> utilizzarlo per finalità diverse, costituisce comportamento contrario ai
> principi dettati dal D.Lgs. 196/2003.
>
>
>
> The information in this message and/or attachments, is intended solely for
> the attention and use of the named addressee(s) and may be confidential or
> proprietary in nature or covered by the provisions of privacy act
> (Legislative Decree June, 30 2003, no.196 - Italy's New Data Protection
> Code).Any use not in accord with its purpose, any disclosure, reproduction,
> copying, distribution, or either dissemination, either whole or partial, is
> strictly forbidden except previous formal approval of the named
> addressee(s). If you are not the intended recipient, please contact
> immediately the sender by telephone, fax or e-mail and delete the
> information in this message that has been received in error. The sender
> does not give any warranty or accept liability as the content, accuracy or
> completeness of sent messages and accepts no responsibility for changes
> made after they were sent or for other risks which arise as a result of
> e-mail transmission, viruses, etc.
>
>
>
------------------------------------------------------------------------------
New Year. New Location. New Benefits. New Data Center in Ashburn, VA.
GigeNET is offering a free month of service with a new server in Ashburn.
Choose from 2 high performing configs, both with 100TB of bandwidth.
Higher redundancy.Lower latency.Increased capacity.Completely compliant.
http://p.sf.net/sfu/gigenet
_______________________________________________
Geoserver-users mailing list
Geoserver-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/geoserver-users
