Hi Mattias, No, currently it is not possible to change this behaviour. It may be that the previous behaviour was considered a bug.
Cheers, Graham From: Mattias Andrén <mattias.and...@varberg.se> Sent: Friday, 10 June 2022 5:38 PM To: Humphries, Graham <graham.humphr...@stategrowth.tas.gov.au>; geoserver-users@lists.sourceforge.net Subject: Sv: GeoServer 2.21 - Admin and Proxy Base Url Thanks Graham, I will try this. I would prefer to have a global setting for this since I have 62 workspaces which I really don't want to enable local settings for. Is it possible to add a global setting to enable the old behavior regarding this? Regards Mattias Andrén Från: Humphries, Graham <graham.humphr...@stategrowth.tas.gov.au<mailto:graham.humphr...@stategrowth.tas.gov.au>> Skickat: den 9 juni 2022 23:45 Till: Mattias Andrén <mattias.and...@varberg.se<mailto:mattias.and...@varberg.se>>; geoserver-users@lists.sourceforge.net<mailto:geoserver-users@lists.sourceforge.net> Ämne: RE: GeoServer 2.21 - Admin and Proxy Base Url Hi Mattias, FYI I have deployed Geoserver 2.21.0 into my test environment. This has a similar setup to what you describe, except the reverse proxying is handled by Apache HTTPD running on Unix. To stop the admin pages being redirected I removed the Global setting for the Proxy base URL and have only applied it in the individual workspace settings. Cheers, Graham From: Mattias Andrén via Geoserver-users <geoserver-users@lists.sourceforge.net<mailto:geoserver-users@lists.sourceforge.net>> Sent: Thursday, 9 June 2022 10:54 PM To: geoserver-users@lists.sourceforge.net<mailto:geoserver-users@lists.sourceforge.net> Subject: [Geoserver-users] GeoServer 2.21 - Admin and Proxy Base Url Hi, I'm trying to upgrade from Geoserver 2.18 to 2.21 on my test server. I have been using this version on my dev server without issue. I'm using IIS URL Rewrite as a reverse proxy. As a consequence I have set the Proxy Base URL in the Geoserver Global Settings to match. This has been working without issue in previous versions and the Admin interface uses the local URL. My production server is running version 2.18.0 with this configuration. If I have the Proxy Base URL set in my test instance the Admin interface applies the Proxy Base URL (from the Global Settings page) to all the pages in the Admin interface. In previous version (i.e 2.18) the Admin interface did not apply the Proxy Base URL and you could use the Admin interface on the server using http://localhost:8080/geoserver Is it possible to alter this behavior and revert it back to how it worked before? Se also the question posted by Graham Humphries https://sourceforge.net/p/geoserver/mailman/message/37250476/<https://aus01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fsourceforge.net%2Fp%2Fgeoserver%2Fmailman%2Fmessage%2F37250476%2F&data=05%7C01%7CGraham.Humphries%40stategrowth.tas.gov.au%7Ccbb4057e9c7d4731485a08da4ab44003%7C64ebab8accf44b5ca2d32b4e972d96b2%7C0%7C0%7C637904435286323338%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=Q7m%2FzAPDUjaDIvBa44YaWxTydw1c1FrBBSmdGSiWxT0%3D&reserved=0> Regards Mattias Andrén ________________________________ CONFIDENTIALITY NOTICE AND DISCLAIMER The information in this transmission may be confidential and/or protected by legal professional privilege, and is intended only for the person or persons to whom it is addressed. If you are not such a person, you are warned that any disclosure, copying or dissemination of the information is unauthorised. If you have received the transmission in error, please immediately contact this office by telephone, fax or email, to inform us of the error and to enable arrangements to be made for the destruction of the transmission, or its return at our cost. No liability is accepted for any unauthorised use of the information contained in this transmission. ________________________________ CONFIDENTIALITY NOTICE AND DISCLAIMER The information in this transmission may be confidential and/or protected by legal professional privilege, and is intended only for the person or persons to whom it is addressed. If you are not such a person, you are warned that any disclosure, copying or dissemination of the information is unauthorised. If you have received the transmission in error, please immediately contact this office by telephone, fax or email, to inform us of the error and to enable arrangements to be made for the destruction of the transmission, or its return at our cost. No liability is accepted for any unauthorised use of the information contained in this transmission.
_______________________________________________ Geoserver-users mailing list Please make sure you read the following two resources before posting to this list: - Earning your support instead of buying it, but Ian Turton: http://www.ianturton.com/talks/foss4g.html#/ - The GeoServer user list posting guidelines: http://geoserver.org/comm/userlist-guidelines.html If you want to request a feature or an improvement, also see this: https://github.com/geoserver/geoserver/wiki/Successfully-requesting-and-integrating-new-features-and-improvements-in-GeoServer Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
