See
<https://jenkins.osmocom.org/jenkins/job/master-osmo-bsc/a1=default,a2=default,a3=default,label=osmocom-master-debian9/3960/display/redirect>
------------------------------------------
[...truncated 823.46 KB...]
list
write terminal
write file
write memory
write
show running-config
exit
end
network country code <1-999>
mobile network code <0-999>
encryption a5 <0-3> [<0-3>] [<0-3>] [<0-3>]
timezone <-19-19> (0|15|30|45)
timezone <-19-19> (0|15|30|45) <0-2>
no timezone
periodic location update <6-1530>
no periodic location update
meas-feed destination ADDR <0-65535>
meas-feed scenario NAME
timer TNNNN (default|<1-65535>)
neci (0|1)
paging any use tch (0|1)
bts <0-255>
handover (0|1|default)
handover algorithm (1|2|default)
handover1 window rxlev averaging (<1-10>|default)
handover1 window rxqual averaging (<1-10>|default)
handover1 window rxlev neighbor averaging (<1-10>|default)
handover1 power budget interval (<1-99>|default)
handover1 power budget hysteresis (<0-999>|default)
handover1 maximum distance (<0-9999>|default)
handover2 window rxlev averaging (<1-10>|default)
handover2 window rxqual averaging (<1-10>|default)
handover2 window rxlev neighbor averaging (<1-10>|default)
handover2 power budget interval (<1-99>|default)
handover2 power budget hysteresis (<0-999>|default)
handover2 maximum distance (<0-9999>|default)
handover2 assignment (0|1|default)
handover2 tdma-measurement (full|subset|default)
handover2 min rxlev (<-110--50>|default)
handover2 min rxqual (<0-7>|default)
handover2 afs-bias rxlev (<0-20>|default)
handover2 afs-bias rxqual (<0-7>|default)
handover2 min-free-slots tch/f (<0-9999>|default)
handover2 min-free-slots tch/h (<0-9999>|default)
handover2 max-handovers (<1-9999>|default)
handover2 penalty-time max-distance (<0-99999>|default)
handover2 penalty-time failed-ho (<0-99999>|default)
handover2 penalty-time failed-assignment (<0-99999>|default)
handover2 retries (<0-9>|default)
handover2 congestion-check (disabled|<1-999>|now)
OsmoBSC(config-net)# meas-feed destination 127.0.0.23 4223
OsmoBSC(config-net)# meas-feed scenario foo23
OsmoBSC(config-net)# show running-config
Current configuration:
!
!
log stderr
logging filter all 1
logging color 1
logging print category 0
logging timestamp 0
logging print file 1
logging level rll notice
logging level mm notice
logging level rr notice
logging level rsl notice
logging level nm info
logging level pag notice
logging level meas notice
logging level msc notice
logging level ho notice
logging level hodec notice
logging level ref notice
logging level nat notice
logging level ctrl notice
logging level filter debug
logging level pcu debug
logging level lcls notice
logging level chan notice
logging level ts notice
logging level as notice
logging level lglobal notice
logging level llapd notice
logging level linp notice
logging level lmux notice
logging level lmi notice
logging level lmib notice
logging level lsms notice
logging level lctrl notice
logging level lgtp notice
logging level lstats notice
logging level lgsup notice
logging level loap notice
logging level lss7 notice
logging level lsccp notice
logging level lsua notice
logging level lm3ua notice
logging level lmgcp notice
logging level ljibuf notice
!
stats interval 5
!
line vty
no login
!
e1_input
e1_line 0 driver ipa
e1_line 0 port 0
no e1_line 0 keepalive
cs7 instance 0
point-code 0.23.3
network
network country code 901
mobile network code 70
encryption a5 1 3
neci 0
paging any use tch 0
meas-feed destination 127.0.0.23 4223
meas-feed scenario foo23
bts 0
type sysmobts
band DCS1800
cell_identity 0
location_area_code 23
base_station_id_code 63
ms max power 15
cell reselection hysteresis 4
rxlev access min 0
radio-link-timeout 32
channel allocator ascending
rach tx integer 9
rach max transmission 7
channel-descrption attach 1
channel-descrption bs-pa-mfrms 5
channel-descrption bs-ag-blks-res 1
no access-control-class-ramping
access-control-class-ramping-step-interval dynamic
access-control-class-ramping-step-size 1
early-classmark-sending forbidden
early-classmark-sending-3g allowed
ip.access unit_id 1800 0
oml ip.access stream_id 255 line 0
neighbor-list mode automatic
codec-support fr hr efr amr
amr tch-f modes 1 2 6 7
amr tch-f threshold ms 32 32 32
amr tch-f hysteresis ms 8 8 8
amr tch-f threshold bts 32 32 32
amr tch-f hysteresis bts 8 8 8
amr tch-f start-mode auto
amr tch-h modes 1 2 4 5
amr tch-h threshold ms 32 32 32
amr tch-h hysteresis ms 8 8 8
amr tch-h threshold bts 32 32 32
amr tch-h hysteresis bts 8 8 8
amr tch-h start-mode auto
gprs mode none
no force-combined-si
trx 0
rf_locked 0
arfcn 868
nominal power 23
max_power_red 0
rsl e1 tei 0
timeslot 0
phys_chan_config CCCH+SDCCH4
hopping enabled 0
timeslot 1
phys_chan_config SDCCH8
hopping enabled 0
timeslot 2
phys_chan_config TCH/F
hopping enabled 0
timeslot 3
phys_chan_config TCH/F
hopping enabled 0
timeslot 4
phys_chan_config TCH/F
hopping enabled 0
timeslot 5
phys_chan_config TCH/F
hopping enabled 0
timeslot 6
phys_chan_config TCH/F
hopping enabled 0
timeslot 7
phys_chan_config TCH/F
hopping enabled 0
msc 0
ip.access rtp-base 4000
no bsc-welcome-text
no bsc-msc-lost-text
no bsc-grace-text
codec-list hr3
type normal
allow-emergency deny
amr-config 12_2k forbidden
amr-config 10_2k forbidden
amr-config 7_95k forbidden
amr-config 7_40k forbidden
amr-config 6_70k forbidden
amr-config 5_90k allowed
amr-config 5_15k forbidden
amr-config 4_75k forbidden
asp-protocol m3ua
lcls-mode disabled
lcls-codec-mismatch forbidden
bsc
mid-call-timeout 0
no missing-msc-text
end
[1;36m<0004> bsc_init.c:49 shutting down OML for BTS 0
[0;mlogging level cc (debug|info|notice|error|fatal)
logging level mgcp (debug|info|notice|error|fatal)
signal 15 received
Terminating took 2.679s
RESULTS:
pass: ./handover_cfg.vty
FAIL: ./neighbor_ident.vty
pass: ./osmo-bsc.vty
make[6]: *** [vty-test] Error 1
Makefile:696: recipe for target 'vty-test' failed
make[6]: Leaving directory '/build/tests'
Makefile:683: recipe for target 'python-tests' failed
make[5]: Leaving directory '/build/tests'
make[5]: *** [python-tests] Error 2
Makefile:702: recipe for target 'check-local' failed
make[4]: Leaving directory '/build/tests'
make[4]: *** [check-local] Error 2
Makefile:545: recipe for target 'check-am' failed
make[3]: Leaving directory '/build/tests'
make[3]: *** [check-am] Error 2
Makefile:397: recipe for target 'check-recursive' failed
make[2]: *** [check-recursive] Error 1
make[2]: Leaving directory '/build/tests'
Makefile:434: recipe for target 'check-recursive' failed
make[1]: Leaving directory '/build'
make[1]: *** [check-recursive] Error 1
make: *** [check] Error 2
Makefile:725: recipe for target 'check' failed
+ cat-testlogs.sh
Build step 'Execute shell' marked build as failure
[WARNINGS]Skipping publisher since build result is FAILURE
