See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bsc/a1=default,a2=default,a3=default,label=osmocom-master-debian9/3966/display/redirect>
------------------------------------------ [...truncated 846.89 KB...] list write terminal write file write memory write show running-config exit end network country code <1-999> mobile network code <0-999> encryption a5 <0-3> [<0-3>] [<0-3>] [<0-3>] timezone <-19-19> (0|15|30|45) timezone <-19-19> (0|15|30|45) <0-2> no timezone periodic location update <6-1530> no periodic location update meas-feed destination ADDR <0-65535> meas-feed scenario NAME timer TNNNN (default|<1-65535>) neci (0|1) paging any use tch (0|1) bts <0-255> handover (0|1|default) handover algorithm (1|2|default) handover1 window rxlev averaging (<1-10>|default) handover1 window rxqual averaging (<1-10>|default) handover1 window rxlev neighbor averaging (<1-10>|default) handover1 power budget interval (<1-99>|default) handover1 power budget hysteresis (<0-999>|default) handover1 maximum distance (<0-9999>|default) handover2 window rxlev averaging (<1-10>|default) handover2 window rxqual averaging (<1-10>|default) handover2 window rxlev neighbor averaging (<1-10>|default) handover2 power budget interval (<1-99>|default) handover2 power budget hysteresis (<0-999>|default) handover2 maximum distance (<0-9999>|default) handover2 assignment (0|1|default) handover2 tdma-measurement (full|subset|default) handover2 min rxlev (<-110--50>|default) handover2 min rxqual (<0-7>|default) handover2 afs-bias rxlev (<0-20>|default) handover2 afs-bias rxqual (<0-7>|default) handover2 min-free-slots tch/f (<0-9999>|default) handover2 min-free-slots tch/h (<0-9999>|default) handover2 max-handovers (<1-9999>|default) handover2 penalty-time max-distance (<0-99999>|default) handover2 penalty-time failed-ho (<0-99999>|default) handover2 penalty-time failed-assignment (<0-99999>|default) handover2 retries (<0-9>|default) handover2 congestion-check (disabled|<1-999>|now) OsmoBSC(config-net)# meas-feed destination 127.0.0.23 4223 OsmoBSC(config-net)# meas-feed scenario foo23 OsmoBSC(config-net)# show running-config Current configuration: ! ! log stderr logging filter all 1 logging color 1 logging print category 0 logging timestamp 0 logging print file 1 logging level rll notice logging level mm notice logging level rr notice logging level rsl notice logging level nm info logging level pag notice logging level meas notice logging level msc notice logging level ho notice logging level hodec notice logging level ref notice logging level nat notice logging level ctrl notice logging level filter debug logging level pcu debug logging level lcls notice logging level chan notice logging level ts notice logging level as notice logging level lglobal notice logging level llapd notice logging level linp notice logging level lmux notice logging level lmi notice logging level lmib notice logging level lsms notice logging level lctrl notice logging level lgtp notice logging level lstats notice logging level lgsup notice logging level loap notice logging level lss7 notice logging level lsccp notice logging level lsua notice logging level lm3ua notice logging level lmgcp notice logging level ljibuf notice ! stats interval 5 ! line vty no login ! e1_input e1_line 0 driver ipa e1_line 0 port 0 no e1_line 0 keepalive cs7 instance 0 point-code 0.23.3 network network country code 901 mobile network code 70 encryption a5 1 3 neci 0 paging any use tch 0 meas-feed destination 127.0.0.23 4223 meas-feed scenario foo23 bts 0 type sysmobts band DCS1800 cell_identity 0 location_area_code 23 base_station_id_code 63 ms max power 15 cell reselection hysteresis 4 rxlev access min 0 radio-link-timeout 32 channel allocator ascending rach tx integer 9 rach max transmission 7 channel-descrption attach 1 channel-descrption bs-pa-mfrms 5 channel-descrption bs-ag-blks-res 1 no access-control-class-ramping access-control-class-ramping-step-interval dynamic access-control-class-ramping-step-size 1 early-classmark-sending forbidden early-classmark-sending-3g allowed ip.access unit_id 1800 0 oml ip.access stream_id 255 line 0 neighbor-list mode automatic codec-support fr hr efr amr amr tch-f modes 1 2 6 7 amr tch-f threshold ms 32 32 32 amr tch-f hysteresis ms 8 8 8 amr tch-f threshold bts 32 32 32 amr tch-f hysteresis bts 8 8 8 amr tch-f start-mode auto amr tch-h modes 1 2 4 5 amr tch-h threshold ms 32 32 32 amr tch-h hysteresis ms 8 8 8 amr tch-h threshold bts 32 32 32 amr tch-h hysteresis bts 8 8 8 amr tch-h start-mode auto gprs mode none no force-combined-si trx 0 rf_locked 0 arfcn 868 nominal power 23 max_power_red 0 rsl e1 tei 0 timeslot 0 phys_chan_config CCCH+SDCCH4 hopping enabled 0 timeslot 1 phys_chan_config SDCCH8 hopping enabled 0 timeslot 2 phys_chan_config TCH/F hopping enabled 0 timeslot 3 phys_chan_config TCH/F hopping enabled 0 timeslot 4 phys_chan_config TCH/F hopping enabled 0 timeslot 5 phys_chan_config TCH/F hopping enabled 0 timeslot 6 phys_chan_config TCH/F hopping enabled 0 timeslot 7 phys_chan_config TCH/F hopping enabled 0 msc 0 ip.access rtp-base 4000 no bsc-welcome-text no bsc-msc-lost-text no bsc-grace-text codec-list hr3 type normal allow-emergency deny amr-config 12_2k forbidden amr-config 10_2k forbidden amr-config 7_95k forbidden amr-config 7_40k forbidden amr-config 6_70k forbidden amr-config 5_90k allowed amr-config 5_15k forbidden amr-config 4_75k forbidden asp-protocol m3ua lcls-mode disabled lcls-codec-mismatch forbidden bsc mid-call-timeout 0 no missing-msc-text end [1;36m<0004> bsc_init.c:49 shutting down OML for BTS 0 [0;mlogging level cc (debug|info|notice|error|fatal) logging level mgcp (debug|info|notice|error|fatal) signal 15 received Terminating took 2.679s RESULTS: pass: ./handover_cfg.vty FAIL: ./neighbor_ident.vty pass: ./osmo-bsc.vty make[6]: *** [vty-test] Error 1 Makefile:696: recipe for target 'vty-test' failed make[6]: Leaving directory '/build/tests' Makefile:683: recipe for target 'python-tests' failed make[5]: Leaving directory '/build/tests' make[5]: *** [python-tests] Error 2 Makefile:702: recipe for target 'check-local' failed make[4]: Leaving directory '/build/tests' make[4]: *** [check-local] Error 2 Makefile:545: recipe for target 'check-am' failed make[3]: Leaving directory '/build/tests' make[3]: *** [check-am] Error 2 make[2]: *** [check-recursive] Error 1 Makefile:397: recipe for target 'check-recursive' failed make[2]: Leaving directory '/build/tests' Makefile:434: recipe for target 'check-recursive' failed make[1]: Leaving directory '/build' make[1]: *** [check-recursive] Error 1 Makefile:725: recipe for target 'check' failed make: *** [check] Error 2 + cat-testlogs.sh Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE