Like earlier patchsets, I want to implement a feature that involves
modifications to the test suite. Since that feature will probably take a
while to polish up, however, let's clean up the test suite in a separate
patchset first so it's not blocked by the feature work.
1/15 is a cleanup to an unrelated test that I found while addressing
some of Eric's comments.
2/15 is a general improvement to test_rev_cmp() that will be used later
in the series.
Changes since v1:
* Incorporate Eric's feedback
Denton Liu (15):
t7408: replace `test_must_fail test_path_is_file`
t: teach test_cmp_rev to accept ! for not-equals
t5520: improve test style
t5520: use sq for test case names
t5520: let sed open its own input
t5520: replace test -f with test-lib functions
t5520: remove spaces after redirect operator
t5520: use test_line_count where possible
t5520: replace test -{n,z} with test-lib functions
t5520: use test_cmp_rev where possible
t5520: test single-line files by git with test_cmp
t5520: don't put git in upstream of pipe
t5520: replace subshell cat comparison with test_cmp
t5520: remove redundant lines in test cases
t5520: replace `! git` with `test_must_fail git`
t/t2400-worktree-add.sh | 4 +-
t/t3400-rebase.sh | 2 +-
t/t3421-rebase-topology-linear.sh | 6 +-
t/t3430-rebase-merges.sh | 2 +-
t/t3432-rebase-fast-forward.sh | 2 +-
t/t3501-revert-cherry-pick.sh | 2 +-
t/t3508-cherry-pick-many-commits.sh | 2 +-
t/t5520-pull.sh | 343 +++++++++++++++++-----------
t/t7408-submodule-reference.sh | 2 +-
t/test-lib-functions.sh | 13 +-
10 files changed, 227 insertions(+), 151 deletions(-)
Range-diff against v1:
-: ---------- > 1: 987fee4652 t7408: replace `test_must_fail
test_path_is_file`
-: ---------- > 2: 417e808466 t: teach test_cmp_rev to accept ! for
not-equals
1: 0bc54dd330 = 3: 0a56980857 t5520: improve test style
2: a5dee82ecc = 4: dfa89ba1cb t5520: use sq for test case names
3: 58cc2fcda3 = 5: 9fac3dff83 t5520: let sed open its own input
4: d2946208d3 ! 6: c6ca45eb17 t5520: replace test -f with test_path_is_file
@@ Metadata
Author: Denton Liu <[email protected]>
## Commit message ##
- t5520: replace test -f with test_path_is_file
+ t5520: replace test -f with test-lib functions
Although `test -f` has the same functionality as test_path_is_file(),
in
the case where test_path_is_file() fails, we get much better debugging
- information. Replace `test -f` with test_path_is_file so that future
- developers will have a better experience debugging these test cases.
+ information.
+
+ Replace `test -f` with test_path_is_file() so that future developers
+ will have a better experience debugging these test cases.
+
+ Also, in the case of `! test -f`, not only should that path not be a
+ file, it shouldn't exist at all so replace it with
+ test_path_is_missing().
Signed-off-by: Denton Liu <[email protected]>
@@ t/t5520-pull.sh: test_expect_success 'pulling into void must not create
an octop
cd cloned-octopus &&
test_must_fail git pull .. master master &&
- ! test -f file
-+ test_must_fail test_path_is_file file
++ test_path_is_missing file
)
'
5: 5b4c1dd291 = 7: 830a8212ae t5520: remove spaces after redirect operator
6: 26fea15950 = 8: 3d982230be t5520: use test_line_count where possible
7: 3fc0354c9c ! 9: 2bca4f046d t5520: replace test -{n,z} with test-lib
functions
@@ Metadata
## Commit message ##
t5520: replace test -{n,z} with test-lib functions
+ When wrapping a Git command in a subshell within another command, we
+ throw away the Git command's exit code. In case the Git command fails,
+ we would like to know about it rather than the failure being silent.
+ Extract Git commands so that their exit codes are not lost.
+
Instead of using `test -n` or `test -z`, replace them respectively with
- invocations of test_file_not_empty() and test_must_be_empty().
+ invocations of test_file_not_empty() and test_must_be_empty() so that
we
+ get better debugging information in the case of a failure.
Signed-off-by: Denton Liu <[email protected]>
8: f4eb80c9ac ! 10: 1a54db1d5c t5520: use test_cmp_rev where possible
@@ Commit message
s/test "$(git rev-parse.* \([^)]*\))" = "$(git rev-parse
\([^)]*\))"/test_cmp_rev \1 \2/
s/test \([^ ]*\) = "$(git rev-parse.* \([^)]*\))"/test_cmp_rev
\1 \2/
- s/test "$(git rev-parse.* \([^)]*\))" != "$(git rev-parse.*
\([^)]*\))"/test_must_fail test_cmp_rev \1 \2/
- s/test \([^ ]*\) != "$(git rev-parse.*
\([^)]*\))"/test_must_fail test_cmp_rev \1 \2/
+ s/test "$(git rev-parse.* \([^)]*\))" != "$(git rev-parse.*
\([^)]*\))"/test_cmp_rev ! \1 \2/
+ s/test \([^ ]*\) != "$(git rev-parse.*
\([^)]*\))"/test_cmp_rev ! \1 \2/
Signed-off-by: Denton Liu <[email protected]>
@@ t/t5520-pull.sh: test_expect_success 'branch.to-rebase.rebase should
override pu
test_config branch.to-rebase.rebase false &&
git pull . copy &&
- test "$(git rev-parse HEAD^)" != "$(git rev-parse copy)" &&
-+ test_must_fail test_cmp_rev HEAD^ copy &&
++ test_cmp_rev ! HEAD^ copy &&
test new = "$(git show HEAD:file2)"
'
@@ t/t5520-pull.sh: test_expect_success 'pull --rebase dies early with
dirty workin
git checkout HEAD -- file &&
git pull &&
- test "$COPY" != "$(git rev-parse --verify me/copy)"
-+ test_must_fail test_cmp_rev "$COPY" me/copy
++ test_cmp_rev ! "$COPY" me/copy
'
test_expect_success 'pull --rebase works on branch yet to be born' '
9: bd3ec4239c ! 11: 52cf4f0d0f t5520: test single-line files by git with
test_cmp
@@ Commit message
s/\(\s*\)test \([^ ]*\) = "$(\(git [^)]*\))"/\1echo \2 >expect
\&\&\n\1\3 >actual \&\&\n\1test_cmp expect actual/
s/\(\s*\)test "$(\(git [^)]*\))" = \([^ ]*\)/\1echo \3 >expect
\&\&\n\1\2 >actual \&\&\n\1test_cmp expect actual/
+ A future patch will clean up situations where we have multiple
duplicate
+ statements within a test case. This is done to keep this patch purely
+ mechanical.
+
Signed-off-by: Denton Liu <[email protected]>
## t/t5520-pull.sh ##
@@ t/t5520-pull.sh: test_expect_success 'branch.to-rebase.rebase' '
@@ t/t5520-pull.sh: test_expect_success 'branch.to-rebase.rebase should
override pull.rebase' '
test_config branch.to-rebase.rebase false &&
git pull . copy &&
- test_must_fail test_cmp_rev HEAD^ copy &&
+ test_cmp_rev ! HEAD^ copy &&
- test new = "$(git show HEAD:file2)"
+ echo new >expect &&
+ git show HEAD:file2 >actual &&
10: 61b4df0f7c = 12: 0cfabb201c t5520: don't put git in upstream of pipe
11: f3429bbb57 ! 13: b2d0ce21c8 t5520: replace subshell cat comparison with
test_cmp
@@ Commit message
s/\(\s*\)test \([^=]*\)= "$(cat \([^)]*\))"/\1echo \2>expect
\&\&\n\1test_cmp expect \3/
s/\(\s*\)test "$(cat \([^)]*\))" = \([^&]*\)\( &&\)\?$/\1echo
\3 >expect \&\&\n\1test_cmp expect \2\4/
+ A future patch will clean up situations where we have multiple
duplicate
+ statements within a test case. This is done to keep this patch purely
+ mechanical.
+
Signed-off-by: Denton Liu <[email protected]>
## t/t5520-pull.sh ##
-: ---------- > 14: 5aac40a029 t5520: remove redundant lines in test cases
12: 3e6c591b2b = 15: 2c0d3ac416 t5520: replace `! git` with `test_must_fail
git`
--
2.23.0.897.g0a19638b1e
