On 08/19/2010 05:55 PM, Rodolfo Martínez wrote:
Es raro que no reconozca los discos, el soporte de
SAS/SATA/Controladoras de arreglos es muy bueno en Linux.
Imagino que el servidor trae una controladora de arreglos. Si la trae,
entra al BIOS de la tarjeta y verifica que por lo menos los detecte.
Recomiendo crear un arreglo de nivel 1.
Cuando llegues al punto de crear las particiones y no detecte los
discos presiona Ctrl + Alt + F3 para ver si ha reportado algún error.
También seria útil ver la salida de lspci, list-harddrives, fdisk -l y
lsmod (lo puedes hacer desde Ctrl + Alt + F2).
¿Estás completamente seguro que el CD/DVD no contiene errores?
Saludos
--
Rodolfo
2010/8/19 Fernando Rojas de la Torre<fernandoro...@eneut.org>:
Al tratar de instalar centos 5.5 no me detecta ningún disco.
No se nada de hardware especial como servidor, trae 2 discos sata de 500 gb
y en el bios en el apartado de system settings/Network hay un apartado de
iscsi configuration.
¿se supone que deba buscar documentación para instalar por iscsi, aún cuando
están integrados los discos duros en elmismo gabinete o le busco mas bien
para cargar un controlador desde un disco cargando el disco de instalacion
con linux dd?
Ya tengo rato en RTFM y no he encontrado nada concreto aún, es por ello que
pregunto a la lista.
Gracias.
El dvd está correcto, ejecuté la autoprueba que trae y no reportó errores...
No puedo ingresar a la configuración del raid.. ¿en qué momento es el
que debe de presionarse ctrl+r?
de lspci sale:
00:00.0 Host bridge: Intel Corporation 5520 I/O Hub to ESI Port (rev 13)
00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express
Root Port 1 (rev 13)
00:02.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express
Root Port 2 (rev 13)
00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express
Root Port 3 (rev 13)
00:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express
Root Port 7 (rev 13)
00:10.0 PIC: Intel Corporation 5520/5500/X58 Physical and Link Layer
Registers Port 0 (rev 13)
00:10.1 PIC: Intel Corporation 5520/5500/X58 Routing and Protocol Layer
Registers Port 0 (rev 13)
00:11.0 PIC: Intel Corporation 5520/5500 Physical and Link Layer
Registers Port 1 (rev 13)
00:11.1 PIC: Intel Corporation 5520/5500 Routing & Protocol Layer
Register Port 1 (rev 13)
00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management
Registers (rev 13)
00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch
Pad Registers (rev 13)
00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and
RAS Registers (rev 13)
00:14.3 PIC: Intel Corporation 5520/5500/X58 I/O Hub Throttle Registers
(rev 13)
00:15.0 PIC: Intel Corporation 5520/5500/X58 Trusted Execution
Technology Registers (rev 13)
00:16.0 System peripheral: Intel Corporation 5520/5500/X58 Chipset
QuickData Technology Device (rev 13)
00:16.1 System peripheral: Intel Corporation 5520/5500/X58 Chipset
QuickData Technology Device (rev 13)
00:16.2 System peripheral: Intel Corporation 5520/5500/X58 Chipset
QuickData Technology Device (rev 13)
00:16.3 System peripheral: Intel Corporation 5520/5500/X58 Chipset
QuickData Technology Device (rev 13)
00:16.4 System peripheral: Intel Corporation 5520/5500/X58 Chipset
QuickData Technology Device (rev 13)
00:16.5 System peripheral: Intel Corporation 5520/5500/X58 Chipset
QuickData Technology Device (rev 13)
00:16.6 System peripheral: Intel Corporation 5520/5500/X58 Chipset
QuickData Technology Device (rev 13)
00:16.7 System peripheral: Intel Corporation 5520/5500/X58 Chipset
QuickData Technology Device (rev 13)
00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #4
00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #5
00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2
EHCI Controller #2
00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express
Root Port 1
00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express
Root Port 5
00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #1
00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #2
00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #3
00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2
EHCI Controller #1
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
00:1f.0 ISA bridge: Intel Corporation 82801JIB (ICH10) LPC Interface
Controller
00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port
SATA IDE Controller #1 <-------------
00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port
SATA IDE Controller #2 <--------------
01:00.0 RAID bus controller: LSI Logic / Symbios Logic LSI MegaSAS 9260
(rev 03) <----------
06:00.0 PCI bridge: Vitesse Semiconductor VSC452 [SuperBMC] (rev 01)
07:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200EV
0b:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5709
Gigabit Ethernet (rev 20)
0b:00.1 Ethernet controller: Broadcom Corporation NetXtreme II BCM5709
Gigabit Ethernet (rev 20)
de lsmod:
Module Size Used by Not tainted
sha256 15297 0
aes_generic 31745 0
dm_crypt 16581 0
dm_emc 9921 0
dm_round_robin 7617 0
dm_multipath 25421 2 dm_emc,dm_round_robin
scsi_dh 12097 1 dm_multipath
dm_snapshot 23269 0
dm_mirror 24393 0
dm_zero 6337 0
lock_nolock 7489 0
gfs2 349833 1 lock_nolock
ext3 125897 0
jbd 57577 1 ext3
ext4 243693 0
crc16 6209 1 ext4
jbd2 58329 1 ext4
msdos 12737 0
dm_raid45 67145 0
dm_message 6977 1 dm_raid45
dm_mem_cache 9537 1 dm_raid45
dm_region_hash 15681 1 dm_raid45
dm_log 14785 3 dm_mirror,dm_raid45,dm_region_hash
dm_mod 63481 8
dm_crypt,dm_multipath,dm_snapshot,dm_mirror,dm_zero,dm_raid45,dm_log
raid456 120657 0
xor 18249 1 raid456
raid10 26049 0
raid1 25537 0
raid0 11841 0
ata_piix 23749 1
libata 157445 1 ata_piix
megaraid_sas 41593 0
bnx2 179021 0
uhci_hcd 25421 0
ehci_hcd 33997 0
iscsi_ibft 11217 0
iscsi_tcp 19785 0
libiscsi_tcp 21957 1 iscsi_tcp
libiscsi2 42693 2 iscsi_tcp,libiscsi_tcp
scsi_transport_iscsi2 37709 2 iscsi_tcp,libiscsi2
scsi_transport_iscsi 6085 1 scsi_transport_iscsi2
sr_mod 19941 1
sd_mod 25281 0
scsi_mod 142485 8
scsi_dh,libata,megaraid_sas,iscsi_tcp,libiscsi2,scsi_transport_iscsi2,sr_mod,sd_mod
ide_cd 40161 0
cdrom 36577 2 sr_mod,ide_cd
ipv6 270305 22
xfrm_nalgo 13381 1 ipv6
crypto_api 12609 1 xfrm_nalgo
squashfs 45253 1
pcspkr 7104 0
edd 12805 0
loop 18761 2
nfs 234433 0
nfs_acl 7617 1 nfs
fscache 20321 1 nfs
lockd 63337 1 nfs
sunrpc 146685 3 nfs,nfs_acl,lockd
vfat 15937 0
fat 51165 2 msdos,vfat
cramfs 46261 0
de dmesg:
has been reserved
<6>pnp: 00:0b: ioport range 0xca0-0xca1 has been reserved
<6>pnp: 00:0b: ioport range 0xca4-0xca9 has been reserved
<6>pnp: 00:0b: ioport range 0xcaa-0xcab has been reserved
<6>pnp: 00:0b: ioport range 0xcac-0xccb has been reserved
<6>pnp: 00:0c: ioport range 0xca2-0xca2 has been reserved
<6>pnp: 00:0c: ioport range 0xca3-0xca3 has been reserved
<6>PCI: Bridge: 0000:00:01.0
<6> IO window: disabled.
<6> MEM window: 92000000-00000000
<6> PREFETCH window: disabled.
<6>PCI: Bridge: 0000:00:02.0
<6> IO window: disabled.
<6> MEM window: disabled.
<6> PREFETCH window: disabled.
<6>PCI: Bridge: 0000:00:03.0
<6> IO window: disabled.
<6> MEM window: disabled.
<6> PREFETCH window: disabled.
<6>PCI: Bridge: 0000:00:07.0
<6> IO window: disabled.
<6> MEM window: disabled.
<6> PREFETCH window: disabled.
<6>PCI: Bridge: 0000:00:1c.0
<6> IO window: 1000-0000
<6> MEM window: 97900000-00000000
<6> PREFETCH window 0x0000000098000000-0x00000000980fffff
<6>PCI: Bridge: 0000:06:00.0
<6> IO window: disabled.
<6> MEM window: 97000000-00000000
<6> PREFETCH window 0x0000000096000000-0x0000000096ffffff
<6>PCI: Bridge: 0000:00:1c.4
<6> IO window: disabled.
<6> MEM window: 97000000-00000000
<6> PREFETCH window 0x0000000096000000-0x0000000096ffffff
<6>PCI: Bridge: 0000:00:1e.0
<6> IO window: disabled.
<6> MEM window: disabled.
<6> PREFETCH window: disabled.
<6>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 28 (level, low) -> IRQ 169
<7>PCI: Setting latency timer of device 0000:00:01.0 to 64
<6>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 29 (level, low) -> IRQ 177
<7>PCI: Setting latency timer of device 0000:00:02.0 to 64
<6>ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 24 (level, low) -> IRQ 185
<7>PCI: Setting latency timer of device 0000:00:03.0 to 64
<6>ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 30 (level, low) -> IRQ 193
<7>PCI: Setting latency timer of device 0000:00:07.0 to 64
<6>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 201
<7>PCI: Setting latency timer of device 0000:00:1c.0 to 64
<6>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 201
<7>PCI: Setting latency timer of device 0000:00:1c.4 to 64
<6>ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 16 (level, low) -> IRQ 201
<7>PCI: Setting latency timer of device 0000:06:00.0 to 64
<7>PCI: Setting latency timer of device 0000:00:1e.0 to 64
<6>NET: Registered protocol family 2
<4>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
<4>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
<4>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
<6>TCP: Hash tables configured (established 131072 bind 65536)
<6>TCP reno registered
<6>IBM machine detected. Enabling interrupts during APM calls.
<6>apm: BIOS not found.
<6>audit: initializing netlink socket (disabled)
<5>type=2000 audit(1282244242.549:1): initialized
<4>highmem bounce pool size: 64 pages
<4>Total HugeTLB memory allocated, 0
<5>VFS: Disk quotas dquot_6.5.1
<4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<7>SELinux: Registering netfilter hooks
<6>Initializing Cryptographic API
<6>alg: No test for crc32c (crc32c-generic)
<4>ksign: Installing public key data
<4>Loading keyring
<4>- Added public key 285B5C47ED7A1E8E
<4>- User ID: CentOS (Kernel Module GPG key)
<6>io scheduler noop registered
<6>io scheduler anticipatory registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered (default)
<7>Boot video device is 0000:07:00.0
<7>PCI: Setting latency timer of device 0000:00:01.0 to 64
<7>PCI: Setting latency timer of device 0000:00:02.0 to 64
<7>PCI: Setting latency timer of device 0000:00:03.0 to 64
<7>PCI: Setting latency timer of device 0000:00:07.0 to 64
<7>PCI: Setting latency timer of device 0000:00:1c.0 to 64
<7>PCI: Setting latency timer of device 0000:00:1c.4 to 64
<6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
<6>Real Time Clock Driver v1.12ac
<7>hpet_resources: 0xfed00000 is busy
<6>Non-volatile memory driver v1.2
<6>Linux agpgart interface v0.101 (c) Dave Jones
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
<6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
<6>00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
<6>brd: module loaded
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
<7>Probing IDE interface ide0...
<7>Probing IDE interface ide1...
<4>ide-floppy driver 0.99.newide
<6>usbcore: registered new driver hiddev
<6>usbcore: registered new driver usbhid
<6>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
<6>PNP: No PS/2 controller found. Probing ports directly.
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>mice: PS/2 mouse device common for all mice
<6>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>md: bitmap version 4.39
<6>TCP bic registered
<6>Initializing IPsec netlink socket
<6>NET: Registered protocol family 1
<6>NET: Registered protocol family 17
<4>Using IPI No-Shortcut mode
<6>ACPI: (supports S0 S1 S5)
<6>Initalizing network drop monitor service
<6>Freeing unused kernel memory: 228k freed
<4>Write protecting the kernel read-only data: 409k
<6>Time: tsc clocksource has been installed.
<5>FS-Cache: Loaded
<6>loop: loaded (max 8 devices)
<4>floppy0: no floppy controllers found
<6>BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
<6>EDD information not available.
<6>input: PC Speaker as /class/input/input0
<6>squashfs: version 3.2-alpha (2006/12/12) Phillip Lougher
<6>NET: Registered protocol family 10
<6>lo: Disabled Privacy Extensions
<6>IPv6 over IPv4 tunneling driver
<5>SCSI subsystem initialized
<6>Loading iSCSI transport class v2.0-871.
<5>iscsi: registered transport (tcp)
<6>No iBFT detected.
<6>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 19 (level, low) -> IRQ 74
<7>PCI: Setting latency timer of device 0000:00:1a.7 to 64
<6>ehci_hcd 0000:00:1a.7: EHCI Host Controller
<6>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
<6>ehci_hcd 0000:00:1a.7: debug port 1
<7>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
<6>ehci_hcd 0000:00:1a.7: irq 74, io mem 0x97a21000
<6>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
<6>usb usb1: configuration #1 chosen from 1 choice
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 6 ports detected
<6>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 17 (level, low) -> IRQ 82
<7>PCI: Setting latency timer of device 0000:00:1d.7 to 64
<6>ehci_hcd 0000:00:1d.7: EHCI Host Controller
<6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
<6>ehci_hcd 0000:00:1d.7: debug port 1
<7>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
<6>ehci_hcd 0000:00:1d.7: irq 82, io mem 0x97a20000
<6>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
<6>usb usb2: configuration #1 chosen from 1 choice
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 6 ports detected
<6>USB Universal Host Controller Interface driver v3.0
<6>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 17 (level, low) -> IRQ 82
<7>PCI: Setting latency timer of device 0000:00:1a.0 to 64
<6>uhci_hcd 0000:00:1a.0: UHCI Host Controller
<6>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
<6>uhci_hcd 0000:00:1a.0: irq 82, io base 0x000020a0
<6>usb usb3: configuration #1 chosen from 1 choice
<6>hub 3-0:1.0: USB hub found
<6>hub 3-0:1.0: 2 ports detected
<6>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 18 (level, low) -> IRQ 90
<7>PCI: Setting latency timer of device 0000:00:1a.1 to 64
<6>uhci_hcd 0000:00:1a.1: UHCI Host Controller
<6>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
<6>uhci_hcd 0000:00:1a.1: irq 90, io base 0x00002080
<6>usb usb4: configuration #1 chosen from 1 choice
<6>hub 4-0:1.0: USB hub found
<6>hub 4-0:1.0: 2 ports detected
<6>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 17 (level, low) -> IRQ 82
<7>PCI: Setting latency timer of device 0000:00:1d.0 to 64
<6>uhci_hcd 0000:00:1d.0: UHCI Host Controller
<6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
<6>uhci_hcd 0000:00:1d.0: irq 82, io base 0x00002060
<6>usb usb5: configuration #1 chosen from 1 choice
<6>hub 5-0:1.0: USB hub found
<6>hub 5-0:1.0: 2 ports detected
<6>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 18 (level, low) -> IRQ 90
<7>PCI: Setting latency timer of device 0000:00:1d.1 to 64
<6>uhci_hcd 0000:00:1d.1: UHCI Host Controller
<6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
<6>uhci_hcd 0000:00:1d.1: irq 90, io base 0x00002040
<6>usb usb6: configuration #1 chosen from 1 choice
<6>hub 6-0:1.0: USB hub found
<6>hub 6-0:1.0: 2 ports detected
<6>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 19 (level, low) -> IRQ 74
<7>PCI: Setting latency timer of device 0000:00:1d.2 to 64
<6>uhci_hcd 0000:00:1d.2: UHCI Host Controller
<6>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
<6>uhci_hcd 0000:00:1d.2: irq 74, io base 0x00002020
<6>usb usb7: configuration #1 chosen from 1 choice
<6>hub 7-0:1.0: USB hub found
<6>hub 7-0:1.0: 2 ports detected
<6>usb 3-1: new low speed USB device using uhci_hcd and address 2
<6>usb 3-1: configuration #1 chosen from 1 choice
<6>input: USB Optical Mouse as /class/input/input1
<6>input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.0-1
<6>usb 3-2: new low speed USB device using uhci_hcd and address 3
<6>usb 3-2: configuration #1 chosen from 1 choice
<6>input: Chicony USB Keyboard as /class/input/input2
<6>input: USB HID v1.11 Keyboard [Chicony USB Keyboard] on
usb-0000:00:1a.0-2
<6>input: Chicony USB Keyboard as /class/input/input3
<6>input,hiddev96: USB HID v1.11 Device [Chicony USB Keyboard] on
usb-0000:00:1a.0-2
<6>usb 5-2: new full speed USB device using uhci_hcd and address 2
<6>usb 5-2: configuration #1 chosen from 2 choices
<6>Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.2 (Aug 21, 2009)
<6>ACPI: PCI Interrupt 0000:0b:00.0[A] -> GSI 28 (level, low) -> IRQ 169
<7>PCI: Setting latency timer of device 0000:0b:00.0 to 64
<6>eth0: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found
at mem 92000000, IRQ 169, node addr e41f1342a244
<6>ACPI: PCI Interrupt 0000:0b:00.1[B] -> GSI 40 (level, low) -> IRQ 98
<7>PCI: Setting latency timer of device 0000:0b:00.1 to 64
<6>eth1: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found
at mem 94000000, IRQ 98, node addr e41f1342a246
<6>megasas: 00.00.04.17-RH1 Wed. Nov. 25, 11:41:51 PST 2009
<6>megasas: 0x1000:0x0079:0x1014:0x03b2: bus 1:slot 0:func 0
<6>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 201
<7>PCI: Setting latency timer of device 0000:01:00.0 to 64
<6>megasas: FW now in Ready state
<6>scsi0 : LSI SAS based MegaRAID driver
<5> Vendor: ATA Model: ST9500530NS Rev: BE16
<5> Type: Direct-Access ANSI SCSI revision: 05
<5> Vendor: ATA Model: ST9500530NS Rev: BE16
<5> Type: Direct-Access ANSI SCSI revision: 05
<7>libata version 3.00 loaded.
<7>ata_piix 0000:00:1f.2: version 2.12
<6>ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 16 (level, low) -> IRQ 201
<6>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
<7>PCI: Setting latency timer of device 0000:00:1f.2 to 64
<6>scsi1 : ata_piix
<6>scsi2 : ata_piix
<6>ata1: SATA max UDMA/133 cmd 0x2118 ctl 0x212c bmdma 0x20f0 irq 201
<6>ata2: SATA max UDMA/133 cmd 0x2110 ctl 0x2128 bmdma 0x20f8 irq 201
<6>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<7>ata1.01: NODEV after polling detection
<6>ata1.00: ATAPI: DVD-ROM UJDA782, WA84, max UDMA/33
<6>ata1.00: configured for UDMA/33
<6>ata2: SATA link down (SStatus 0 SControl 300)
<5> Vendor: MATSHITA Model: DVD-ROM UJDA782 Rev: WA84
<5> Type: CD-ROM ANSI SCSI revision: 05
<4>sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
<6>Uniform CD-ROM driver Revision: 3.20
<7>sr 1:0:0:0: Attached scsi CD-ROM sr0
<6>ACPI: PCI Interrupt 0000:00:1f.5[C] -> GSI 21 (level, low) -> IRQ 106
<6>ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
<7>PCI: Setting latency timer of device 0000:00:1f.5 to 64
<6>scsi3 : ata_piix
<6>scsi4 : ata_piix
<6>ata3: SATA max UDMA/133 cmd 0x2108 ctl 0x2124 bmdma 0x20d0 irq 106
<6>ata4: SATA max UDMA/133 cmd 0x2100 ctl 0x2120 bmdma 0x20d8 irq 106
<6>ata3: SATA link down (SStatus 0 SControl 300)
<6>ata4: SATA link down (SStatus 0 SControl 300)
<7>ISO 9660 Extensions: Microsoft Joliet Level 3
<4>Unable to load NLS charset utf8
<4>Unable to load NLS charset utf8
<7>ISO 9660 Extensions: RRIP_1991A
<4>Unable to identify CD-ROM format.
<4>VFS: Can't find an ext2 filesystem on dev loop0.
<7>security: 3 users, 6 roles, 1951 types, 257 bools, 1 sens, 1024 cats
<7>security: 61 classes, 77097 rules
<7>SELinux: Completing initialization.
<7>SELinux: Setting up existing superblocks.
<7>SELinux: initialized (dev loop0, type squashfs), not configured for
labeling
<7>SELinux: initialized (dev sr0, type iso9660), uses genfs_contexts
<7>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
<7>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
<7>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
<7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
<7>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
<7>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
<7>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
<7>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
<7>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
<7>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
<7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
<7>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses
genfs_contexts
<7>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
<7>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
<7>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
<7>SELinux: initialized (dev proc, type proc), uses genfs_contexts
<7>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
<7>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
<7>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
<5>type=1403 audit(1282244265.033:2): policy loaded auid=4294967295
ses=4294967295
<6>md: raid0 personality registered for level 0
<6>md: raid1 personality registered for level 1
<6>md: raid10 personality registered for level 10
<6>raid5: automatically using best checksumming function: pIII_sse
<4> pIII_sse : 10140.000 MB/sec
<4>raid5: using function: pIII_sse (10140.000 MB/sec)
<4>raid6: int32x1 1097 MB/s
<4>raid6: int32x2 1175 MB/s
<4>raid6: int32x4 1000 MB/s
<4>raid6: int32x8 968 MB/s
<4>raid6: mmxx1 3554 MB/s
<4>raid6: mmxx2 4250 MB/s
<4>raid6: sse1x1 3277 MB/s
<4>raid6: sse1x2 3843 MB/s
<4>raid6: sse2x1 6445 MB/s
<4>raid6: sse2x2 7574 MB/s
<4>raid6: using algorithm sse2x2 (7574 MB/s)
<6>md: raid6 personality registered for level 6
<6>md: raid5 personality registered for level 5
<6>md: raid4 personality registered for level 4
<6>device-mapper: uevent: version 1.0.3
<6>device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised:
dm-de...@redhat.com
<6>device-mapper: dm-raid45: initialized v0.2594l
<4>GFS2 (built Apr 2 2010 15:00:14) installed
<6>Lock_Nolock (built Apr 2 2010 15:00:24) installed
<6>device-mapper: multipath: version 1.0.5 loaded
<6>device-mapper: multipath round-robin: version 1.0.0 loaded
<6>device-mapper: multipath emc: version 0.0.3 loaded
<6>mtrr: no more MTRRs available
<6>mtrr: no more MTRRs available
<6>mtrr: no more MTRRs available
<6>mtrr: no more MTRRs available
<6>mtrr: no more MTRRs available
<6>mtrr: no more MTRRs available
<6>bnx2: eth0: using MSIX
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>bnx2: eth0 NIC Copper Link is Up, 100 Mbps full duplex, receive &
transmit flow control ON
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<7>eth0: no IPv6 routers present
