Hi Marcus, I am testing out 4.1 myself and I will have some update today. For this particular traceback, gsyncd is not able to find the library. Is it the rpm install? If so, gluster libraries would be in /usr/lib. Please run the cmd below.
#ldconfig /usr/lib #ldconfig -p /usr/lib | grep libgf (This should list libgfchangelog.so) Geo-rep should be fixed automatically. Thanks, Kotresh HR On Wed, Jul 18, 2018 at 1:27 AM, Marcus Pedersén <marcus.peder...@slu.se> wrote: > Hi again, > > I continue to do some testing, but now I have come to a stage where I need > help. > > > gsyncd.log was complaining about that /usr/local/sbin/gluster was missing > so I made a link. > > After that /usr/local/sbin/glusterfs was missing so I made a link there as > well. > > Both links were done on all slave nodes. > > > Now I have a new error that I can not resolve myself. > > It can not open libgfchangelog.so > > > Many thanks! > > Regards > > Marcus Pedersén > > > Part of gsyncd.log: > > OSError: libgfchangelog.so: cannot open shared object file: No such file > or directory > [2018-07-17 19:32:06.517106] I [repce(agent /urd-gds/gluster):89:service_loop] > RepceServer: terminating on reaching EOF. > [2018-07-17 19:32:07.479553] I [monitor(monitor):272:monitor] Monitor: > worker died in startup phase brick=/urd-gds/gluster > [2018-07-17 19:32:17.500709] I [monitor(monitor):158:monitor] Monitor: > starting gsyncd worker brick=/urd-gds/gluster slave_node=urd-gds-geo-000 > [2018-07-17 19:32:17.541547] I [gsyncd(agent /urd-gds/gluster):297:main] > <top>: Using session config file path=/var/lib/glusterd/geo- > replication/urd-gds-volume_urd-gds-geo-001_urd-gds-volume/gsyncd.conf > [2018-07-17 19:32:17.541959] I [gsyncd(worker /urd-gds/gluster):297:main] > <top>: Using session config file path=/var/lib/glusterd/geo- > replication/urd-gds-volume_urd-gds-geo-001_urd-gds-volume/gsyncd.conf > [2018-07-17 19:32:17.542363] I [changelogagent(agent > /urd-gds/gluster):72:__init__] ChangelogAgent: Agent listining... > [2018-07-17 19:32:17.550894] I [resource(worker > /urd-gds/gluster):1348:connect_remote] > SSH: Initializing SSH connection between master and slave... > [2018-07-17 19:32:19.166246] I [resource(worker > /urd-gds/gluster):1395:connect_remote] > SSH: SSH connection between master and slave established. > duration=1.6151 > [2018-07-17 19:32:19.166806] I [resource(worker > /urd-gds/gluster):1067:connect] > GLUSTER: Mounting gluster volume locally... > [2018-07-17 19:32:20.257344] I [resource(worker > /urd-gds/gluster):1090:connect] > GLUSTER: Mounted gluster volume duration=1.0901 > [2018-07-17 19:32:20.257921] I [subcmds(worker > /urd-gds/gluster):70:subcmd_worker] > <top>: Worker spawn successful. Acknowledging back to monitor > [2018-07-17 19:32:20.274647] E [repce(agent /urd-gds/gluster):114:worker] > <top>: call failed: > Traceback (most recent call last): > File "/usr/libexec/glusterfs/python/syncdaemon/repce.py", line 110, in > worker > res = getattr(self.obj, rmeth)(*in_data[2:]) > File "/usr/libexec/glusterfs/python/syncdaemon/changelogagent.py", line > 37, in init > return Changes.cl_init() > File "/usr/libexec/glusterfs/python/syncdaemon/changelogagent.py", line > 21, in __getattr__ > from libgfchangelog import Changes as LChanges > File "/usr/libexec/glusterfs/python/syncdaemon/libgfchangelog.py", line > 17, in <module> > class Changes(object): > File "/usr/libexec/glusterfs/python/syncdaemon/libgfchangelog.py", line > 19, in Changes > use_errno=True) > File "/usr/lib64/python2.7/ctypes/__init__.py", line 360, in __init__ > self._handle = _dlopen(self._name, mode) > OSError: libgfchangelog.so: cannot open shared object file: No such file > or directory > [2018-07-17 19:32:20.275093] E [repce(worker /urd-gds/gluster):206:__call__] > RepceClient: call failed call=6078:139982918485824:1531855940.27 > method=init error=OSError > [2018-07-17 19:32:20.275192] E [syncdutils(worker > /urd-gds/gluster):330:log_raise_exception] <top>: FAIL: > Traceback (most recent call last): > File "/usr/libexec/glusterfs/python/syncdaemon/gsyncd.py", line 311, in > main > func(args) > File "/usr/libexec/glusterfs/python/syncdaemon/subcmds.py", line 72, in > subcmd_worker > local.service_loop(remote) > File "/usr/libexec/glusterfs/python/syncdaemon/resource.py", line 1236, > in service_loop > changelog_agent.init() > File "/usr/libexec/glusterfs/python/syncdaemon/repce.py", line 225, in > __call__ > return self.ins(self.meth, *a) > File "/usr/libexec/glusterfs/python/syncdaemon/repce.py", line 207, in > __call__ > raise res > OSError: libgfchangelog.so: cannot open shared object file: No such file > or directory > [2018-07-17 19:32:20.286787] I [repce(agent /urd-gds/gluster):89:service_loop] > RepceServer: terminating on reaching EOF. > [2018-07-17 19:32:21.259891] I [monitor(monitor):272:monitor] Monitor: > worker died in startup phase brick=/urd-gds/gluster > > > > ------------------------------ > *Från:* gluster-users-boun...@gluster.org <gluster-users-bounces@ > gluster.org> för Marcus Pedersén <marcus.peder...@slu.se> > *Skickat:* den 16 juli 2018 21:59 > *Till:* khire...@redhat.com > > *Kopia:* gluster-users@gluster.org > *Ämne:* Re: [Gluster-users] Upgrade to 4.1.1 geo-replication does not work > > > Hi Kotresh, > > I have been testing for a bit and as you can see from the logs I sent > before permission is denied for geouser on slave node on file: > > /var/log/glusterfs/cli.log > > I have turned selinux off and just for testing I changed permissions on > /var/log/glusterfs/cli.log so geouser can access it. > > Starting geo-replication after that gives response successful but all > nodes get status Faulty. > > > If I run: gluster-mountbroker status > > I get: > > +-----------------------------+-------------+--------------- > ------------+--------------+--------------------------+ > | NODE | NODE STATUS | MOUNT ROOT > | GROUP | USERS | > +-----------------------------+-------------+--------------- > ------------+--------------+--------------------------+ > | urd-gds-geo-001.hgen.slu.se | UP | /var/mountbroker-root(OK) | > geogroup(OK) | geouser(urd-gds-volume) | > | urd-gds-geo-002 | UP | /var/mountbroker-root(OK) | > geogroup(OK) | geouser(urd-gds-volume) | > | localhost | UP | /var/mountbroker-root(OK) | > geogroup(OK) | geouser(urd-gds-volume) | > +-----------------------------+-------------+--------------- > ------------+--------------+--------------------------+ > > > and that is all nodes on slave cluster, so mountbroker seems ok. > > > gsyncd.log logs an error about /usr/local/sbin/gluster is missing. > > That is correct cos gluster is in /sbin/gluster and /urs/sbin/gluster > > Another error is that SSH between master and slave is broken, > > but now when I have changed permission on /var/log/glusterfs/cli.log I can > run: > > ssh -oPasswordAuthentication=no -oStrictHostKeyChecking=no -i > /var/lib/glusterd/geo-replication/secret.pem -p 22 geouser@urd-gds-geo-001 > gluster --xml --remote-host=localhost volume info urd-gds-volume > > as geouser and that works, which means that the ssh connection works. > > > Is the permissions on /var/log/glusterfs/cli.log changed when > geo-replication is setup? > > Is gluster supposed to be in /usr/local/sbin/gluster? > > > Do I have any options or should I remove current geo-replication and > create a new? > > How much do I need to clean up before creating a new geo-replication? > > In that case can I pause geo-replication, mount slave cluster on master > cluster and run rsync , just to speed up transfer of files? > > > Many thanks in advance! > > Marcus Pedersén > > > Part from the gsyncd.log: > > [2018-07-16 19:34:56.26287] E [syncdutils(worker > /urd-gds/gluster):749:errlog] Popen: command returned error cmd=ssh > -oPasswordAuthentication=no -oStrictHostKeyChecking=no -i > /var/lib/glusterd/geo-replicatio\ > n/secret.pem -p 22 -oControlMaster=auto -S /tmp/gsyncd-aux-ssh-WrbZ22/ > bf60c68f1a195dad59573a8dbaa309f2.sock geouser@urd-gds-geo-001 > /nonexistent/gsyncd slave urd-gds-volume geouser@urd-gds-geo-001::urd- > gds-volu\ > me --master-node urd-gds-001 --master-node-id > 912bebfd-1a7f-44dc-b0b7-f001a20d58cd > --master-brick /urd-gds/gluster --local-node urd-gds-geo-000 > --local-node-id 03075698-2bbf-43e4-a99a-65fe82f61794 --slave-timeo\ > ut 120 --slave-log-level INFO --slave-gluster-log-level INFO > --slave-gluster-command-dir /usr/local/sbin/ error=1 > [2018-07-16 19:34:56.26583] E [syncdutils(worker > /urd-gds/gluster):753:logerr] Popen: ssh> failure: execution of > "/usr/local/sbin/gluster" failed with ENOENT (No such file or directory) > [2018-07-16 19:34:56.33901] I [repce(agent /urd-gds/gluster):89:service_loop] > RepceServer: terminating on reaching EOF. > [2018-07-16 19:34:56.34307] I [monitor(monitor):262:monitor] Monitor: > worker died before establishing connection brick=/urd-gds/gluster > [2018-07-16 19:35:06.59412] I [monitor(monitor):158:monitor] Monitor: > starting gsyncd worker brick=/urd-gds/gluster slave_node=urd-gds-geo-000 > [2018-07-16 19:35:06.99509] I [gsyncd(worker /urd-gds/gluster):297:main] > <top>: Using session config file path=/var/lib/glusterd/geo- > replication/urd-gds-volume_urd-gds-geo-001_urd-gds-volume/gsyncd.conf > [2018-07-16 19:35:06.99561] I [gsyncd(agent /urd-gds/gluster):297:main] > <top>: Using session config file path=/var/lib/glusterd/geo- > replication/urd-gds-volume_urd-gds-geo-001_urd-gds-volume/gsyncd.conf > [2018-07-16 19:35:06.100481] I [changelogagent(agent > /urd-gds/gluster):72:__init__] ChangelogAgent: Agent listining... > [2018-07-16 19:35:06.108834] I [resource(worker > /urd-gds/gluster):1348:connect_remote] > SSH: Initializing SSH connection between master and slave... > [2018-07-16 19:35:06.762320] E [syncdutils(worker > /urd-gds/gluster):303:log_raise_exception] <top>: connection to peer is > broken > [2018-07-16 19:35:06.763103] E [syncdutils(worker > /urd-gds/gluster):749:errlog] Popen: command returned error cmd=ssh > -oPasswordAuthentication=no -oStrictHostKeyChecking=no -i > /var/lib/glusterd/geo-replicatio\ > n/secret.pem -p 22 -oControlMaster=auto -S /tmp/gsyncd-aux-ssh-K9mB6Q/ > bf60c68f1a195dad59573a8dbaa309f2.sock geouser@urd-gds-geo-001 > /nonexistent/gsyncd slave urd-gds-volume geouser@urd-gds-geo-001::urd- > gds-volu\ > me --master-node urd-gds-001 --master-node-id > 912bebfd-1a7f-44dc-b0b7-f001a20d58cd > --master-brick /urd-gds/gluster --local-node urd-gds-geo-000 > --local-node-id 03075698-2bbf-43e4-a99a-65fe82f61794 --slave-timeo\ > ut 120 --slave-log-level INFO --slave-gluster-log-level INFO > --slave-gluster-command-dir /usr/local/sbin/ error=1 > [2018-07-16 19:35:06.763398] E [syncdutils(worker > /urd-gds/gluster):753:logerr] Popen: ssh> failure: execution of > "/usr/local/sbin/gluster" failed with ENOENT (No such file or directory) > [2018-07-16 19:35:06.771905] I [repce(agent /urd-gds/gluster):89:service_loop] > RepceServer: terminating on reaching EOF. > [2018-07-16 19:35:06.772272] I [monitor(monitor):262:monitor] Monitor: > worker died before establishing connection brick=/urd-gds/gluster > [2018-07-16 19:35:16.786387] I [monitor(monitor):158:monitor] Monitor: > starting gsyncd worker brick=/urd-gds/gluster slave_node=urd-gds-geo-000 > [2018-07-16 19:35:16.828056] I [gsyncd(worker /urd-gds/gluster):297:main] > <top>: Using session config file path=/var/lib/glusterd/geo- > replication/urd-gds-volume_urd-gds-geo-001_urd-gds-volume/gsyncd.conf > [2018-07-16 19:35:16.828066] I [gsyncd(agent /urd-gds/gluster):297:main] > <top>: Using session config file path=/var/lib/glusterd/geo- > replication/urd-gds-volume_urd-gds-geo-001_urd-gds-volume/gsyncd.conf > [2018-07-16 19:35:16.828912] I [changelogagent(agent > /urd-gds/gluster):72:__init__] ChangelogAgent: Agent listining... > [2018-07-16 19:35:16.837100] I [resource(worker > /urd-gds/gluster):1348:connect_remote] > SSH: Initializing SSH connection between master and slave... > [2018-07-16 19:35:17.260257] E [syncdutils(worker > /urd-gds/gluster):303:log_raise_exception] <top>: connection to peer is > broken > > ------------------------------ > *Från:* gluster-users-boun...@gluster.org <gluster-users-bounces@ > gluster.org> för Marcus Pedersén <marcus.peder...@slu.se> > *Skickat:* den 13 juli 2018 14:50 > *Till:* Kotresh Hiremath Ravishankar > *Kopia:* gluster-users@gluster.org > *Ämne:* Re: [Gluster-users] Upgrade to 4.1.1 geo-replication does not work > > Hi Kotresh, > Yes, all nodes have the same version 4.1.1 both master and slave. > All glusterd are crashing on the master side. > Will send logs tonight. > > Thanks, > Marcus > > ################ > Marcus Pedersén > Systemadministrator > Interbull Centre > ################ > Sent from my phone > ################ > > Den 13 juli 2018 11:28 skrev Kotresh Hiremath Ravishankar < > khire...@redhat.com>: > > Hi Marcus, > > Is the gluster geo-rep version is same on both master and slave? > > Thanks, > Kotresh HR > > On Fri, Jul 13, 2018 at 1:26 AM, Marcus Pedersén <marcus.peder...@slu.se> > wrote: > > Hi Kotresh, > > i have replaced both files (gsyncdconfig.py > <https://review.gluster.org/#/c/20207/1/geo-replication/syncdaemon/gsyncdconfig.py> > and repce.py > <https://review.gluster.org/#/c/20207/1/geo-replication/syncdaemon/repce.py>) > in all nodes both master and slave. > > I rebooted all servers but geo-replication status is still Stopped. > > I tried to start geo-replication with response Successful but status still > show Stopped on all nodes. > > Nothing has been written to geo-replication logs since I sent the tail of > the log. > > So I do not know what info to provide? > > > Please, help me to find a way to solve this. > > > Thanks! > > > Regards > > Marcus > > > ------------------------------ > *Från:* gluster-users-boun...@gluster.org <gluster-users-bounces@gluster > .org> för Marcus Pedersén <marcus.peder...@slu.se> > *Skickat:* den 12 juli 2018 08:51 > *Till:* Kotresh Hiremath Ravishankar > *Kopia:* gluster-users@gluster.org > *Ämne:* Re: [Gluster-users] Upgrade to 4.1.1 geo-replication does not work > > Thanks Kotresh, > I installed through the official centos channel, centos-release-gluster41. > Isn't this fix included in centos install? > I will have a look, test it tonight and come back to you! > > Thanks a lot! > > Regards > Marcus > > ################ > Marcus Pedersén > Systemadministrator > Interbull Centre > ################ > Sent from my phone > ################ > > Den 12 juli 2018 07:41 skrev Kotresh Hiremath Ravishankar < > khire...@redhat.com>: > > Hi Marcus, > > I think the fix [1] is needed in 4.1 > Could you please this out and let us know if that works for you? > > [1] https://review.gluster.org/#/c/20207/ > > Thanks, > Kotresh HR > > On Thu, Jul 12, 2018 at 1:49 AM, Marcus Pedersén <marcus.peder...@slu.se> > wrote: > > Hi all, > > I have upgraded from 3.12.9 to 4.1.1 and been following upgrade > instructions for offline upgrade. > > I upgraded geo-replication side first 1 x (2+1) and the master side after > that 2 x (2+1). > > Both clusters works the way they should on their own. > > After upgrade on master side status for all geo-replication nodes > is Stopped. > > I tried to start the geo-replication from master node and response back > was started successfully. > > Status again .... Stopped > > Tried to start again and get response started successfully, after that all > glusterd crashed on all master nodes. > > After a restart of all glusterd the master cluster was up again. > > Status for geo-replication is still Stopped and every try to start it > after this gives the response successful but still status Stopped. > > > Please help me get the geo-replication up and running again. > > > Best regards > > Marcus Pedersén > > > Part of geo-replication log from master node: > > [2018-07-11 18:42:48.941760] I [changelogagent(/urd-gds/gluster):73:__init__] > ChangelogAgent: Agent listining... > [2018-07-11 18:42:48.947567] I > [resource(/urd-gds/gluster):1780:connect_remote] > SSH: Initializing SSH connection between master and slave... > [2018-07-11 18:42:49.363514] E > [syncdutils(/urd-gds/gluster):304:log_raise_exception] > <top>: connection to peer is broken > [2018-07-11 18:42:49.364279] E [resource(/urd-gds/gluster):210:errlog] > Popen: command returned error cmd=ssh -oPasswordAuthentication=no > -oStrictHostKeyChecking=no -i /var/lib/glusterd/geo-replication/secret\ > .pem -p 22 -oControlMaster=auto -S /tmp/gsyncd-aux-ssh-hjRhBo/7e5 > 534547f3675a710a107722317484f.sock geouser@urd-gds-geo-000 > /nonexistent/gsyncd --session-owner 5e94eb7d-219f-4741-a179-d4ae6b50c7ee > --local-id .%\ > 2Furd-gds%2Fgluster --local-node urd-gds-001 -N --listen --timeout 120 > gluster://localhost:urd-gds-volume error=2 > [2018-07-11 18:42:49.364586] E [resource(/urd-gds/gluster):214:logerr] > Popen: ssh> usage: gsyncd.py [-h] > [2018-07-11 18:42:49.364799] E [resource(/urd-gds/gluster):214:logerr] > Popen: ssh> > [2018-07-11 18:42:49.364989] E [resource(/urd-gds/gluster):214:logerr] > Popen: ssh> {monitor-status,monitor,worker > ,agent,slave,status,config-check,config-get,config-set,confi > g-reset,voluuidget,d\ > elete} > [2018-07-11 18:42:49.365210] E [resource(/urd-gds/gluster):214:logerr] > Popen: ssh> ... > [2018-07-11 18:42:49.365408] E [resource(/urd-gds/gluster):214:logerr] > Popen: ssh> gsyncd.py: error: argument subcmd: invalid choice: > '5e94eb7d-219f-4741-a179-d4ae6b50c7ee' (choose from 'monitor-status', > 'monit\ > or', 'worker', 'agent', 'slave', 'status', 'config-check', 'config-get', > 'config-set', 'config-reset', 'voluuidget', 'delete') > [2018-07-11 18:42:49.365919] I [syncdutils(/urd-gds/gluster):271:finalize] > <top>: exiting. > [2018-07-11 18:42:49.369316] I [repce(/urd-gds/gluster):92:service_loop] > RepceServer: terminating on reaching EOF. > [2018-07-11 18:42:49.369921] I [syncdutils(/urd-gds/gluster):271:finalize] > <top>: exiting. > [2018-07-11 18:42:49.369694] I [monitor(monitor):353:monitor] Monitor: > worker died before establishing connection brick=/urd-gds/gluster > [2018-07-11 18:42:59.492762] I [monitor(monitor):280:monitor] Monitor: > starting gsyncd worker brick=/urd-gds/gluster > slave_node=ssh://geouser@urd-gds-geo-000:gluster://localhost > :urd-gds-volume > [2018-07-11 18:42:59.558491] I > [resource(/urd-gds/gluster):1780:connect_remote] > SSH: Initializing SSH connection between master and slave... > [2018-07-11 18:42:59.559056] I [changelogagent(/urd-gds/gluster):73:__init__] > ChangelogAgent: Agent listining... > [2018-07-11 18:42:59.945693] E > [syncdutils(/urd-gds/gluster):304:log_raise_exception] > <top>: connection to peer is broken > [2018-07-11 18:42:59.946439] E [resource(/urd-gds/gluster):210:errlog] > Popen: command returned error cmd=ssh -oPasswordAuthentication=no > -oStrictHostKeyChecking=no -i /var/lib/glusterd/geo-replication/secret\ > .pem -p 22 -oControlMaster=auto -S /tmp/gsyncd-aux-ssh-992bk7/7e5 > 534547f3675a710a107722317484f.sock geouser@urd-gds-geo-000 > /nonexistent/gsyncd --session-owner 5e94eb7d-219f-4741-a179-d4ae6b50c7ee > --local-id .%\ > 2Furd-gds%2Fgluster --local-node urd-gds-001 -N --listen --timeout 120 > gluster://localhost:urd-gds-volume error=2 > [2018-07-11 18:42:59.946748] E [resource(/urd-gds/gluster):214:logerr] > Popen: ssh> usage: gsyncd.py [-h] > [2018-07-11 18:42:59.946962] E [resource(/urd-gds/gluster):214:logerr] > Popen: ssh> > [2018-07-11 18:42:59.947150] E [resource(/urd-gds/gluster):214:logerr] > Popen: ssh> {monitor-status,monitor,worker > ,agent,slave,status,config-check,config-get,config-set,confi > g-reset,voluuidget,d\ > elete} > [2018-07-11 18:42:59.947369] E [resource(/urd-gds/gluster):214:logerr] > Popen: ssh> ... > [2018-07-11 18:42:59.947552] E [resource(/urd-gds/gluster):214:logerr] > Popen: ssh> gsyncd.py: error: argument subcmd: invalid choice: > '5e94eb7d-219f-4741-a179-d4ae6b50c7ee' (choose from 'monitor-status', > 'monit\ > or', 'worker', 'agent', 'slave', 'status', 'config-check', 'config-get', > 'config-set', 'config-reset', 'voluuidget', 'delete') > [2018-07-11 18:42:59.948046] I [syncdutils(/urd-gds/gluster):271:finalize] > <top>: exiting. > [2018-07-11 18:42:59.951392] I [repce(/urd-gds/gluster):92:service_loop] > RepceServer: terminating on reaching EOF. > [2018-07-11 18:42:59.951760] I [syncdutils(/urd-gds/gluster):271:finalize] > <top>: exiting. > [2018-07-11 18:42:59.951817] I [monitor(monitor):353:monitor] Monitor: > worker died before establishing connection brick=/urd-gds/gluster > [2018-07-11 18:43:10.54580] I [monitor(monitor):280:monitor] Monitor: > starting gsyncd worker brick=/urd-gds/gluster > slave_node=ssh://geouser@urd-gds-geo-000:gluster://localhost > :urd-gds-volume > [2018-07-11 18:43:10.88356] I [monitor(monitor):345:monitor] Monitor: > Changelog Agent died, Aborting Worker brick=/urd-gds/gluster > [2018-07-11 18:43:10.88613] I [monitor(monitor):353:monitor] Monitor: > worker died before establishing connection brick=/urd-gds/gluster > [2018-07-11 18:43:20.112435] I [gsyncdstatus(monitor):242:set_worker_status] > GeorepStatus: Worker Status Change status=inconsistent > [2018-07-11 18:43:20.112885] E [syncdutils(monitor):331:log_raise_exception] > <top>: FAIL: > Traceback (most recent call last): > File "/usr/libexec/glusterfs/python/syncdaemon/syncdutils.py", line > 361, in twrap > except: > File "/usr/libexec/glusterfs/python/syncdaemon/monitor.py", line 428, > in wmon > sys.exit() > TypeError: 'int' object is not iterable > [2018-07-11 18:43:20.114610] I [syncdutils(monitor):271:finalize] <top>: > exiting. > > --- > När du skickar e-post till SLU så innebär detta att SLU behandlar dina > personuppgifter. För att läsa mer om hur detta går till, klicka här > <https://www.slu.se/om-slu/kontakta-slu/personuppgifter/> > E-mailing SLU will result in SLU processing your personal data. For more > information on how this is done, click here > <https://www.slu.se/en/about-slu/contact-slu/personal-data/> > > _______________________________________________ > Gluster-users mailing list > Gluster-users@gluster.org > https://lists.gluster.org/mailman/listinfo/gluster-users > > > > > -- > Thanks and Regards, > Kotresh H R > > > --- > När du skickar e-post till SLU så innebär detta att SLU behandlar dina > personuppgifter. För att läsa mer om hur detta går till, klicka här > <https://www.slu.se/om-slu/kontakta-slu/personuppgifter/> > E-mailing SLU will result in SLU processing your personal data. For more > information on how this is done, click here > <https://www.slu.se/en/about-slu/contact-slu/personal-data/> > > --- > När du skickar e-post till SLU så innebär detta att SLU behandlar dina > personuppgifter. För att läsa mer om hur detta går till, klicka här > <https://www.slu.se/om-slu/kontakta-slu/personuppgifter/> > E-mailing SLU will result in SLU processing your personal data. For more > information on how this is done, click here > <https://www.slu.se/en/about-slu/contact-slu/personal-data/> > > > > > -- > Thanks and Regards, > Kotresh H R > > > --- > När du skickar e-post till SLU så innebär detta att SLU behandlar dina > personuppgifter. För att läsa mer om hur detta går till, klicka här > <https://www.slu.se/om-slu/kontakta-slu/personuppgifter/> > E-mailing SLU will result in SLU processing your personal data. For more > information on how this is done, click here > <https://www.slu.se/en/about-slu/contact-slu/personal-data/> > > --- > När du skickar e-post till SLU så innebär detta att SLU behandlar dina > personuppgifter. För att läsa mer om hur detta går till, klicka här > <https://www.slu.se/om-slu/kontakta-slu/personuppgifter/> > E-mailing SLU will result in SLU processing your personal data. For more > information on how this is done, click here > <https://www.slu.se/en/about-slu/contact-slu/personal-data/> > > --- > När du skickar e-post till SLU så innebär detta att SLU behandlar dina > personuppgifter. För att läsa mer om hur detta går till, klicka här > <https://www.slu.se/om-slu/kontakta-slu/personuppgifter/> > E-mailing SLU will result in SLU processing your personal data. For more > information on how this is done, click here > <https://www.slu.se/en/about-slu/contact-slu/personal-data/> > -- Thanks and Regards, Kotresh H R
_______________________________________________ Gluster-users mailing list Gluster-users@gluster.org https://lists.gluster.org/mailman/listinfo/gluster-users