Hi Marcus, Well there is nothing wrong in setting up a symlink for gluster binary location, but there is a geo-rep command to set it so that gsyncd will search there.
To set on master #gluster vol geo-rep <mastervol> <slave-vol> config gluster-command-dir <gluster-binary-location> To set on slave #gluster vol geo-rep <mastervol> <slave-vol> config slave-gluster-command-dir <gluster-binary-location> Thanks, Kotresh HR On Wed, Jul 18, 2018 at 9:28 AM, Kotresh Hiremath Ravishankar < khire...@redhat.com> wrote: > Hi Marcus, > > I am testing out 4.1 myself and I will have some update today. > For this particular traceback, gsyncd is not able to find the library. > Is it the rpm install? If so, gluster libraries would be in /usr/lib. > Please run the cmd below. > > #ldconfig /usr/lib > #ldconfig -p /usr/lib | grep libgf (This should list libgfchangelog.so) > > Geo-rep should be fixed automatically. > > Thanks, > Kotresh HR > > On Wed, Jul 18, 2018 at 1:27 AM, Marcus Pedersén <marcus.peder...@slu.se> > wrote: > >> Hi again, >> >> I continue to do some testing, but now I have come to a stage where I >> need help. >> >> >> gsyncd.log was complaining about that /usr/local/sbin/gluster was missing >> so I made a link. >> >> After that /usr/local/sbin/glusterfs was missing so I made a link there >> as well. >> >> Both links were done on all slave nodes. >> >> >> Now I have a new error that I can not resolve myself. >> >> It can not open libgfchangelog.so >> >> >> Many thanks! >> >> Regards >> >> Marcus Pedersén >> >> >> Part of gsyncd.log: >> >> OSError: libgfchangelog.so: cannot open shared object file: No such file >> or directory >> [2018-07-17 19:32:06.517106] I [repce(agent >> /urd-gds/gluster):89:service_loop] >> RepceServer: terminating on reaching EOF. >> [2018-07-17 19:32:07.479553] I [monitor(monitor):272:monitor] Monitor: >> worker died in startup phase brick=/urd-gds/gluster >> [2018-07-17 19:32:17.500709] I [monitor(monitor):158:monitor] Monitor: >> starting gsyncd worker brick=/urd-gds/gluster slave_node=urd-gds-geo-000 >> [2018-07-17 19:32:17.541547] I [gsyncd(agent /urd-gds/gluster):297:main] >> <top>: Using session config file path=/var/lib/glusterd/geo-rep >> lication/urd-gds-volume_urd-gds-geo-001_urd-gds-volume/gsyncd.conf >> [2018-07-17 19:32:17.541959] I [gsyncd(worker /urd-gds/gluster):297:main] >> <top>: Using session config file path=/var/lib/glusterd/geo-rep >> lication/urd-gds-volume_urd-gds-geo-001_urd-gds-volume/gsyncd.conf >> [2018-07-17 19:32:17.542363] I [changelogagent(agent >> /urd-gds/gluster):72:__init__] ChangelogAgent: Agent listining... >> [2018-07-17 19:32:17.550894] I [resource(worker >> /urd-gds/gluster):1348:connect_remote] SSH: Initializing SSH connection >> between master and slave... >> [2018-07-17 19:32:19.166246] I [resource(worker >> /urd-gds/gluster):1395:connect_remote] SSH: SSH connection between >> master and slave established. duration=1.6151 >> [2018-07-17 19:32:19.166806] I [resource(worker >> /urd-gds/gluster):1067:connect] GLUSTER: Mounting gluster volume >> locally... >> [2018-07-17 19:32:20.257344] I [resource(worker >> /urd-gds/gluster):1090:connect] GLUSTER: Mounted gluster volume >> duration=1.0901 >> [2018-07-17 19:32:20.257921] I [subcmds(worker >> /urd-gds/gluster):70:subcmd_worker] <top>: Worker spawn successful. >> Acknowledging back to monitor >> [2018-07-17 19:32:20.274647] E [repce(agent /urd-gds/gluster):114:worker] >> <top>: call failed: >> Traceback (most recent call last): >> File "/usr/libexec/glusterfs/python/syncdaemon/repce.py", line 110, in >> worker >> res = getattr(self.obj, rmeth)(*in_data[2:]) >> File "/usr/libexec/glusterfs/python/syncdaemon/changelogagent.py", >> line 37, in init >> return Changes.cl_init() >> File "/usr/libexec/glusterfs/python/syncdaemon/changelogagent.py", >> line 21, in __getattr__ >> from libgfchangelog import Changes as LChanges >> File "/usr/libexec/glusterfs/python/syncdaemon/libgfchangelog.py", >> line 17, in <module> >> class Changes(object): >> File "/usr/libexec/glusterfs/python/syncdaemon/libgfchangelog.py", >> line 19, in Changes >> use_errno=True) >> File "/usr/lib64/python2.7/ctypes/__init__.py", line 360, in __init__ >> self._handle = _dlopen(self._name, mode) >> OSError: libgfchangelog.so: cannot open shared object file: No such file >> or directory >> [2018-07-17 19:32:20.275093] E [repce(worker >> /urd-gds/gluster):206:__call__] RepceClient: call failed >> call=6078:139982918485824:1531855940.27 method=init error=OSError >> [2018-07-17 19:32:20.275192] E [syncdutils(worker >> /urd-gds/gluster):330:log_raise_exception] <top>: FAIL: >> Traceback (most recent call last): >> File "/usr/libexec/glusterfs/python/syncdaemon/gsyncd.py", line 311, >> in main >> func(args) >> File "/usr/libexec/glusterfs/python/syncdaemon/subcmds.py", line 72, >> in subcmd_worker >> local.service_loop(remote) >> File "/usr/libexec/glusterfs/python/syncdaemon/resource.py", line >> 1236, in service_loop >> changelog_agent.init() >> File "/usr/libexec/glusterfs/python/syncdaemon/repce.py", line 225, in >> __call__ >> return self.ins(self.meth, *a) >> File "/usr/libexec/glusterfs/python/syncdaemon/repce.py", line 207, in >> __call__ >> raise res >> OSError: libgfchangelog.so: cannot open shared object file: No such file >> or directory >> [2018-07-17 19:32:20.286787] I [repce(agent >> /urd-gds/gluster):89:service_loop] >> RepceServer: terminating on reaching EOF. >> [2018-07-17 19:32:21.259891] I [monitor(monitor):272:monitor] Monitor: >> worker died in startup phase brick=/urd-gds/gluster >> >> >> >> ------------------------------ >> *Från:* gluster-users-boun...@gluster.org <gluster-users-bounces@gluster >> .org> för Marcus Pedersén <marcus.peder...@slu.se> >> *Skickat:* den 16 juli 2018 21:59 >> *Till:* khire...@redhat.com >> >> *Kopia:* gluster-users@gluster.org >> *Ämne:* Re: [Gluster-users] Upgrade to 4.1.1 geo-replication does not >> work >> >> >> Hi Kotresh, >> >> I have been testing for a bit and as you can see from the logs I sent >> before permission is denied for geouser on slave node on file: >> >> /var/log/glusterfs/cli.log >> >> I have turned selinux off and just for testing I changed permissions on >> /var/log/glusterfs/cli.log so geouser can access it. >> >> Starting geo-replication after that gives response successful but all >> nodes get status Faulty. >> >> >> If I run: gluster-mountbroker status >> >> I get: >> >> +-----------------------------+-------------+--------------- >> ------------+--------------+--------------------------+ >> | NODE | NODE STATUS | MOUNT ROOT >> | GROUP | USERS | >> +-----------------------------+-------------+--------------- >> ------------+--------------+--------------------------+ >> | urd-gds-geo-001.hgen.slu.se | UP | /var/mountbroker-root(OK) >> | geogroup(OK) | geouser(urd-gds-volume) | >> | urd-gds-geo-002 | UP | /var/mountbroker-root(OK) | >> geogroup(OK) | geouser(urd-gds-volume) | >> | localhost | UP | /var/mountbroker-root(OK) | >> geogroup(OK) | geouser(urd-gds-volume) | >> +-----------------------------+-------------+--------------- >> ------------+--------------+--------------------------+ >> >> >> and that is all nodes on slave cluster, so mountbroker seems ok. >> >> >> gsyncd.log logs an error about /usr/local/sbin/gluster is missing. >> >> That is correct cos gluster is in /sbin/gluster and /urs/sbin/gluster >> >> Another error is that SSH between master and slave is broken, >> >> but now when I have changed permission on /var/log/glusterfs/cli.log I >> can run: >> >> ssh -oPasswordAuthentication=no -oStrictHostKeyChecking=no -i >> /var/lib/glusterd/geo-replication/secret.pem -p 22 >> geouser@urd-gds-geo-001 gluster --xml --remote-host=localhost volume >> info urd-gds-volume >> >> as geouser and that works, which means that the ssh connection works. >> >> >> Is the permissions on /var/log/glusterfs/cli.log changed when >> geo-replication is setup? >> >> Is gluster supposed to be in /usr/local/sbin/gluster? >> >> >> Do I have any options or should I remove current geo-replication and >> create a new? >> >> How much do I need to clean up before creating a new geo-replication? >> >> In that case can I pause geo-replication, mount slave cluster on master >> cluster and run rsync , just to speed up transfer of files? >> >> >> Many thanks in advance! >> >> Marcus Pedersén >> >> >> Part from the gsyncd.log: >> >> [2018-07-16 19:34:56.26287] E [syncdutils(worker >> /urd-gds/gluster):749:errlog] Popen: command returned error cmd=ssh >> -oPasswordAuthentication=no -oStrictHostKeyChecking=no -i >> /var/lib/glusterd/geo-replicatio\ >> n/secret.pem -p 22 -oControlMaster=auto -S /tmp/gsyncd-aux-ssh-WrbZ22/bf6 >> 0c68f1a195dad59573a8dbaa309f2.sock geouser@urd-gds-geo-001 >> /nonexistent/gsyncd slave urd-gds-volume geouser@urd-gds-geo-001::urd-g >> ds-volu\ >> me --master-node urd-gds-001 --master-node-id >> 912bebfd-1a7f-44dc-b0b7-f001a20d58cd --master-brick /urd-gds/gluster >> --local-node urd-gds-geo-000 --local-node-id >> 03075698-2bbf-43e4-a99a-65fe82f61794 >> --slave-timeo\ >> ut 120 --slave-log-level INFO --slave-gluster-log-level INFO >> --slave-gluster-command-dir /usr/local/sbin/ error=1 >> [2018-07-16 19:34:56.26583] E [syncdutils(worker >> /urd-gds/gluster):753:logerr] Popen: ssh> failure: execution of >> "/usr/local/sbin/gluster" failed with ENOENT (No such file or directory) >> [2018-07-16 19:34:56.33901] I [repce(agent /urd-gds/gluster):89:service_loop] >> RepceServer: terminating on reaching EOF. >> [2018-07-16 19:34:56.34307] I [monitor(monitor):262:monitor] Monitor: >> worker died before establishing connection brick=/urd-gds/gluster >> [2018-07-16 19:35:06.59412] I [monitor(monitor):158:monitor] Monitor: >> starting gsyncd worker brick=/urd-gds/gluster slave_node=urd-gds-geo-000 >> [2018-07-16 19:35:06.99509] I [gsyncd(worker /urd-gds/gluster):297:main] >> <top>: Using session config file path=/var/lib/glusterd/geo-rep >> lication/urd-gds-volume_urd-gds-geo-001_urd-gds-volume/gsyncd.conf >> [2018-07-16 19:35:06.99561] I [gsyncd(agent /urd-gds/gluster):297:main] >> <top>: Using session config file path=/var/lib/glusterd/geo-rep >> lication/urd-gds-volume_urd-gds-geo-001_urd-gds-volume/gsyncd.conf >> [2018-07-16 19:35:06.100481] I [changelogagent(agent >> /urd-gds/gluster):72:__init__] ChangelogAgent: Agent listining... >> [2018-07-16 19:35:06.108834] I [resource(worker >> /urd-gds/gluster):1348:connect_remote] SSH: Initializing SSH connection >> between master and slave... >> [2018-07-16 19:35:06.762320] E [syncdutils(worker >> /urd-gds/gluster):303:log_raise_exception] <top>: connection to peer is >> broken >> [2018-07-16 19:35:06.763103] E [syncdutils(worker >> /urd-gds/gluster):749:errlog] Popen: command returned error cmd=ssh >> -oPasswordAuthentication=no -oStrictHostKeyChecking=no -i >> /var/lib/glusterd/geo-replicatio\ >> n/secret.pem -p 22 -oControlMaster=auto -S /tmp/gsyncd-aux-ssh-K9mB6Q/bf6 >> 0c68f1a195dad59573a8dbaa309f2.sock geouser@urd-gds-geo-001 >> /nonexistent/gsyncd slave urd-gds-volume geouser@urd-gds-geo-001::urd-g >> ds-volu\ >> me --master-node urd-gds-001 --master-node-id >> 912bebfd-1a7f-44dc-b0b7-f001a20d58cd --master-brick /urd-gds/gluster >> --local-node urd-gds-geo-000 --local-node-id >> 03075698-2bbf-43e4-a99a-65fe82f61794 >> --slave-timeo\ >> ut 120 --slave-log-level INFO --slave-gluster-log-level INFO >> --slave-gluster-command-dir /usr/local/sbin/ error=1 >> [2018-07-16 19:35:06.763398] E [syncdutils(worker >> /urd-gds/gluster):753:logerr] Popen: ssh> failure: execution of >> "/usr/local/sbin/gluster" failed with ENOENT (No such file or directory) >> [2018-07-16 19:35:06.771905] I [repce(agent >> /urd-gds/gluster):89:service_loop] >> RepceServer: terminating on reaching EOF. >> [2018-07-16 19:35:06.772272] I [monitor(monitor):262:monitor] Monitor: >> worker died before establishing connection brick=/urd-gds/gluster >> [2018-07-16 19:35:16.786387] I [monitor(monitor):158:monitor] Monitor: >> starting gsyncd worker brick=/urd-gds/gluster slave_node=urd-gds-geo-000 >> [2018-07-16 19:35:16.828056] I [gsyncd(worker /urd-gds/gluster):297:main] >> <top>: Using session config file path=/var/lib/glusterd/geo-rep >> lication/urd-gds-volume_urd-gds-geo-001_urd-gds-volume/gsyncd.conf >> [2018-07-16 19:35:16.828066] I [gsyncd(agent /urd-gds/gluster):297:main] >> <top>: Using session config file path=/var/lib/glusterd/geo-rep >> lication/urd-gds-volume_urd-gds-geo-001_urd-gds-volume/gsyncd.conf >> [2018-07-16 19:35:16.828912] I [changelogagent(agent >> /urd-gds/gluster):72:__init__] ChangelogAgent: Agent listining... >> [2018-07-16 19:35:16.837100] I [resource(worker >> /urd-gds/gluster):1348:connect_remote] SSH: Initializing SSH connection >> between master and slave... >> [2018-07-16 19:35:17.260257] E [syncdutils(worker >> /urd-gds/gluster):303:log_raise_exception] <top>: connection to peer is >> broken >> >> ------------------------------ >> *Från:* gluster-users-boun...@gluster.org <gluster-users-bounces@gluster >> .org> för Marcus Pedersén <marcus.peder...@slu.se> >> *Skickat:* den 13 juli 2018 14:50 >> *Till:* Kotresh Hiremath Ravishankar >> *Kopia:* gluster-users@gluster.org >> *Ämne:* Re: [Gluster-users] Upgrade to 4.1.1 geo-replication does not >> work >> >> Hi Kotresh, >> Yes, all nodes have the same version 4.1.1 both master and slave. >> All glusterd are crashing on the master side. >> Will send logs tonight. >> >> Thanks, >> Marcus >> >> ################ >> Marcus Pedersén >> Systemadministrator >> Interbull Centre >> ################ >> Sent from my phone >> ################ >> >> Den 13 juli 2018 11:28 skrev Kotresh Hiremath Ravishankar < >> khire...@redhat.com>: >> >> Hi Marcus, >> >> Is the gluster geo-rep version is same on both master and slave? >> >> Thanks, >> Kotresh HR >> >> On Fri, Jul 13, 2018 at 1:26 AM, Marcus Pedersén <marcus.peder...@slu.se> >> wrote: >> >> Hi Kotresh, >> >> i have replaced both files (gsyncdconfig.py >> <https://review.gluster.org/#/c/20207/1/geo-replication/syncdaemon/gsyncdconfig.py> >> and repce.py >> <https://review.gluster.org/#/c/20207/1/geo-replication/syncdaemon/repce.py>) >> in all nodes both master and slave. >> >> I rebooted all servers but geo-replication status is still Stopped. >> >> I tried to start geo-replication with response Successful but status >> still show Stopped on all nodes. >> >> Nothing has been written to geo-replication logs since I sent the tail of >> the log. >> >> So I do not know what info to provide? >> >> >> Please, help me to find a way to solve this. >> >> >> Thanks! >> >> >> Regards >> >> Marcus >> >> >> ------------------------------ >> *Från:* gluster-users-boun...@gluster.org <gluster-users-bounces@gluster >> .org> för Marcus Pedersén <marcus.peder...@slu.se> >> *Skickat:* den 12 juli 2018 08:51 >> *Till:* Kotresh Hiremath Ravishankar >> *Kopia:* gluster-users@gluster.org >> *Ämne:* Re: [Gluster-users] Upgrade to 4.1.1 geo-replication does not >> work >> >> Thanks Kotresh, >> I installed through the official centos channel, centos-release-gluster41. >> Isn't this fix included in centos install? >> I will have a look, test it tonight and come back to you! >> >> Thanks a lot! >> >> Regards >> Marcus >> >> ################ >> Marcus Pedersén >> Systemadministrator >> Interbull Centre >> ################ >> Sent from my phone >> ################ >> >> Den 12 juli 2018 07:41 skrev Kotresh Hiremath Ravishankar < >> khire...@redhat.com>: >> >> Hi Marcus, >> >> I think the fix [1] is needed in 4.1 >> Could you please this out and let us know if that works for you? >> >> [1] https://review.gluster.org/#/c/20207/ >> >> Thanks, >> Kotresh HR >> >> On Thu, Jul 12, 2018 at 1:49 AM, Marcus Pedersén <marcus.peder...@slu.se> >> wrote: >> >> Hi all, >> >> I have upgraded from 3.12.9 to 4.1.1 and been following upgrade >> instructions for offline upgrade. >> >> I upgraded geo-replication side first 1 x (2+1) and the master side after >> that 2 x (2+1). >> >> Both clusters works the way they should on their own. >> >> After upgrade on master side status for all geo-replication nodes >> is Stopped. >> >> I tried to start the geo-replication from master node and response back >> was started successfully. >> >> Status again .... Stopped >> >> Tried to start again and get response started successfully, after that >> all glusterd crashed on all master nodes. >> >> After a restart of all glusterd the master cluster was up again. >> >> Status for geo-replication is still Stopped and every try to start it >> after this gives the response successful but still status Stopped. >> >> >> Please help me get the geo-replication up and running again. >> >> >> Best regards >> >> Marcus Pedersén >> >> >> Part of geo-replication log from master node: >> >> [2018-07-11 18:42:48.941760] I [changelogagent(/urd-gds/gluster):73:__init__] >> ChangelogAgent: Agent listining... >> [2018-07-11 18:42:48.947567] I >> [resource(/urd-gds/gluster):1780:connect_remote] >> SSH: Initializing SSH connection between master and slave... >> [2018-07-11 18:42:49.363514] E >> [syncdutils(/urd-gds/gluster):304:log_raise_exception] >> <top>: connection to peer is broken >> [2018-07-11 18:42:49.364279] E [resource(/urd-gds/gluster):210:errlog] >> Popen: command returned error cmd=ssh -oPasswordAuthentication=no >> -oStrictHostKeyChecking=no -i /var/lib/glusterd/geo-replication/secret\ >> .pem -p 22 -oControlMaster=auto -S /tmp/gsyncd-aux-ssh-hjRhBo/7e5 >> 534547f3675a710a107722317484f.sock geouser@urd-gds-geo-000 >> /nonexistent/gsyncd --session-owner 5e94eb7d-219f-4741-a179-d4ae6b50c7ee >> --local-id .%\ >> 2Furd-gds%2Fgluster --local-node urd-gds-001 -N --listen --timeout 120 >> gluster://localhost:urd-gds-volume error=2 >> [2018-07-11 18:42:49.364586] E [resource(/urd-gds/gluster):214:logerr] >> Popen: ssh> usage: gsyncd.py [-h] >> [2018-07-11 18:42:49.364799] E [resource(/urd-gds/gluster):214:logerr] >> Popen: ssh> >> [2018-07-11 18:42:49.364989] E [resource(/urd-gds/gluster):214:logerr] >> Popen: ssh> {monitor-status,monitor,worker >> ,agent,slave,status,config-check,config-get,config-set,confi >> g-reset,voluuidget,d\ >> elete} >> [2018-07-11 18:42:49.365210] E [resource(/urd-gds/gluster):214:logerr] >> Popen: ssh> ... >> [2018-07-11 18:42:49.365408] E [resource(/urd-gds/gluster):214:logerr] >> Popen: ssh> gsyncd.py: error: argument subcmd: invalid choice: >> '5e94eb7d-219f-4741-a179-d4ae6b50c7ee' (choose from 'monitor-status', >> 'monit\ >> or', 'worker', 'agent', 'slave', 'status', 'config-check', 'config-get', >> 'config-set', 'config-reset', 'voluuidget', 'delete') >> [2018-07-11 18:42:49.365919] I [syncdutils(/urd-gds/gluster):271:finalize] >> <top>: exiting. >> [2018-07-11 18:42:49.369316] I [repce(/urd-gds/gluster):92:service_loop] >> RepceServer: terminating on reaching EOF. >> [2018-07-11 18:42:49.369921] I [syncdutils(/urd-gds/gluster):271:finalize] >> <top>: exiting. >> [2018-07-11 18:42:49.369694] I [monitor(monitor):353:monitor] Monitor: >> worker died before establishing connection brick=/urd-gds/gluster >> [2018-07-11 18:42:59.492762] I [monitor(monitor):280:monitor] Monitor: >> starting gsyncd worker brick=/urd-gds/gluster >> slave_node=ssh://geouser@urd-gds-geo-000:gluster://localhost >> :urd-gds-volume >> [2018-07-11 18:42:59.558491] I >> [resource(/urd-gds/gluster):1780:connect_remote] >> SSH: Initializing SSH connection between master and slave... >> [2018-07-11 18:42:59.559056] I [changelogagent(/urd-gds/gluster):73:__init__] >> ChangelogAgent: Agent listining... >> [2018-07-11 18:42:59.945693] E >> [syncdutils(/urd-gds/gluster):304:log_raise_exception] >> <top>: connection to peer is broken >> [2018-07-11 18:42:59.946439] E [resource(/urd-gds/gluster):210:errlog] >> Popen: command returned error cmd=ssh -oPasswordAuthentication=no >> -oStrictHostKeyChecking=no -i /var/lib/glusterd/geo-replication/secret\ >> .pem -p 22 -oControlMaster=auto -S /tmp/gsyncd-aux-ssh-992bk7/7e5 >> 534547f3675a710a107722317484f.sock geouser@urd-gds-geo-000 >> /nonexistent/gsyncd --session-owner 5e94eb7d-219f-4741-a179-d4ae6b50c7ee >> --local-id .%\ >> 2Furd-gds%2Fgluster --local-node urd-gds-001 -N --listen --timeout 120 >> gluster://localhost:urd-gds-volume error=2 >> [2018-07-11 18:42:59.946748] E [resource(/urd-gds/gluster):214:logerr] >> Popen: ssh> usage: gsyncd.py [-h] >> [2018-07-11 18:42:59.946962] E [resource(/urd-gds/gluster):214:logerr] >> Popen: ssh> >> [2018-07-11 18:42:59.947150] E [resource(/urd-gds/gluster):214:logerr] >> Popen: ssh> {monitor-status,monitor,worker >> ,agent,slave,status,config-check,config-get,config-set,confi >> g-reset,voluuidget,d\ >> elete} >> [2018-07-11 18:42:59.947369] E [resource(/urd-gds/gluster):214:logerr] >> Popen: ssh> ... >> [2018-07-11 18:42:59.947552] E [resource(/urd-gds/gluster):214:logerr] >> Popen: ssh> gsyncd.py: error: argument subcmd: invalid choice: >> '5e94eb7d-219f-4741-a179-d4ae6b50c7ee' (choose from 'monitor-status', >> 'monit\ >> or', 'worker', 'agent', 'slave', 'status', 'config-check', 'config-get', >> 'config-set', 'config-reset', 'voluuidget', 'delete') >> [2018-07-11 18:42:59.948046] I [syncdutils(/urd-gds/gluster):271:finalize] >> <top>: exiting. >> [2018-07-11 18:42:59.951392] I [repce(/urd-gds/gluster):92:service_loop] >> RepceServer: terminating on reaching EOF. >> [2018-07-11 18:42:59.951760] I [syncdutils(/urd-gds/gluster):271:finalize] >> <top>: exiting. >> [2018-07-11 18:42:59.951817] I [monitor(monitor):353:monitor] Monitor: >> worker died before establishing connection brick=/urd-gds/gluster >> [2018-07-11 18:43:10.54580] I [monitor(monitor):280:monitor] Monitor: >> starting gsyncd worker brick=/urd-gds/gluster >> slave_node=ssh://geouser@urd-gds-geo-000:gluster://localhost >> :urd-gds-volume >> [2018-07-11 18:43:10.88356] I [monitor(monitor):345:monitor] Monitor: >> Changelog Agent died, Aborting Worker brick=/urd-gds/gluster >> [2018-07-11 18:43:10.88613] I [monitor(monitor):353:monitor] Monitor: >> worker died before establishing connection brick=/urd-gds/gluster >> [2018-07-11 18:43:20.112435] I [gsyncdstatus(monitor):242:set_worker_status] >> GeorepStatus: Worker Status Change status=inconsistent >> [2018-07-11 18:43:20.112885] E [syncdutils(monitor):331:log_raise_exception] >> <top>: FAIL: >> Traceback (most recent call last): >> File "/usr/libexec/glusterfs/python/syncdaemon/syncdutils.py", line >> 361, in twrap >> except: >> File "/usr/libexec/glusterfs/python/syncdaemon/monitor.py", line 428, >> in wmon >> sys.exit() >> TypeError: 'int' object is not iterable >> [2018-07-11 18:43:20.114610] I [syncdutils(monitor):271:finalize] <top>: >> exiting. >> >> --- >> När du skickar e-post till SLU så innebär detta att SLU behandlar dina >> personuppgifter. För att läsa mer om hur detta går till, klicka här >> <https://www.slu.se/om-slu/kontakta-slu/personuppgifter/> >> E-mailing SLU will result in SLU processing your personal data. For more >> information on how this is done, click here >> <https://www.slu.se/en/about-slu/contact-slu/personal-data/> >> >> _______________________________________________ >> Gluster-users mailing list >> Gluster-users@gluster.org >> https://lists.gluster.org/mailman/listinfo/gluster-users >> >> >> >> >> -- >> Thanks and Regards, >> Kotresh H R >> >> >> --- >> När du skickar e-post till SLU så innebär detta att SLU behandlar dina >> personuppgifter. För att läsa mer om hur detta går till, klicka här >> <https://www.slu.se/om-slu/kontakta-slu/personuppgifter/> >> E-mailing SLU will result in SLU processing your personal data. For more >> information on how this is done, click here >> <https://www.slu.se/en/about-slu/contact-slu/personal-data/> >> >> --- >> När du skickar e-post till SLU så innebär detta att SLU behandlar dina >> personuppgifter. För att läsa mer om hur detta går till, klicka här >> <https://www.slu.se/om-slu/kontakta-slu/personuppgifter/> >> E-mailing SLU will result in SLU processing your personal data. For more >> information on how this is done, click here >> <https://www.slu.se/en/about-slu/contact-slu/personal-data/> >> >> >> >> >> -- >> Thanks and Regards, >> Kotresh H R >> >> >> --- >> När du skickar e-post till SLU så innebär detta att SLU behandlar dina >> personuppgifter. För att läsa mer om hur detta går till, klicka här >> <https://www.slu.se/om-slu/kontakta-slu/personuppgifter/> >> E-mailing SLU will result in SLU processing your personal data. For more >> information on how this is done, click here >> <https://www.slu.se/en/about-slu/contact-slu/personal-data/> >> >> --- >> När du skickar e-post till SLU så innebär detta att SLU behandlar dina >> personuppgifter. För att läsa mer om hur detta går till, klicka här >> <https://www.slu.se/om-slu/kontakta-slu/personuppgifter/> >> E-mailing SLU will result in SLU processing your personal data. For more >> information on how this is done, click here >> <https://www.slu.se/en/about-slu/contact-slu/personal-data/> >> >> --- >> När du skickar e-post till SLU så innebär detta att SLU behandlar dina >> personuppgifter. För att läsa mer om hur detta går till, klicka här >> <https://www.slu.se/om-slu/kontakta-slu/personuppgifter/> >> E-mailing SLU will result in SLU processing your personal data. For more >> information on how this is done, click here >> <https://www.slu.se/en/about-slu/contact-slu/personal-data/> >> > > > > -- > Thanks and Regards, > Kotresh H R > -- Thanks and Regards, Kotresh H R
_______________________________________________ Gluster-users mailing list Gluster-users@gluster.org https://lists.gluster.org/mailman/listinfo/gluster-users