Hello Christophe Geuzaine and Jean-François Remacle,
1) Load the STEP file in Fig_1 into Gmsh and Fig_2 is displayed after rotating the image. 2) Run 3D mesh and Fig_3 is displayed (Looks OK). 3) Save the Geo file and close Gmsh. 4) Reload Gmsh and load the saved Geo file and Fig_4 is displayed after rotating the image. 5) 3D mesh the loaded Geo file and Fig_5 is displayed. 6) Rotate Fig_5 and Fig_6 is displayed. 7) Fig_6 looks nothing like Fig_1 or Fig_3. [cid:[email protected]][cid:[email protected]] Please advise. Thank you, Erroll Brady
_______________________________________________ gmsh mailing list [email protected] http://www.geuz.org/mailman/listinfo/gmsh
