Since it works for you now, I guess there is no need in my picture.
Best,
Mikhail
On 10/13/2014 09:26 AM, Alessandro Vicini wrote:
For some reason I'm not able to open your image, could you sent it in jpg or
tif?
Anyway, I have probably found the reason: It doesn't work with version
2.7.0, while it does with version 2.8.5 (just tried it on windows). Thank
you!
Regards,
Alessandro
-----Messaggio originale-----
Da: Mikhail Artemyev [mailto:[email protected]]
Inviato: lunedì 13 ottobre 2014 16.22
A: Alessandro Vicini; [email protected]
Oggetto: Re: Surface embedded in volume
Attached is what I have. It looks conforming.
I use Gmsh 2.8.5 on Linux Mint. Meshing algorithms:
2D: Frontal
3D: Delaunay
Best,
Mikhail
On 10/13/2014 09:04 AM, Alessandro Vicini wrote:
Take a look at the attached pictures. If I get it right, the faces of
the 2D surface mesh should also be faces of 3d tetrahedrons, but it
doesn't seem so...
Alessandro
-----Messaggio originale-----
Da: Mikhail Artemyev [mailto:[email protected]]
Inviato: lunedì 13 ottobre 2014 15.38
A: Alessandro Vicini; [email protected]
Oggetto: Re: R: Surface embedded in volume
It looks conforming for me. Why do you think it is not?
Best,
Mikhail
On 10/13/2014 08:17 AM, Alessandro Vicini wrote:
Hullo Mikhail,
you're right, there was a mistake in the example. But take the
attached geo file, now the surface is completely embedded, but still
the 3D mesh doesn't look conformal...
Regards,
Alessandro
-----Messaggio originale-----
Da: Mikhail Artemyev [mailto:[email protected]]
Inviato: lunedì 13 ottobre 2014 15.12
A: [email protected]; [email protected]
Oggetto: Re: Surface embedded in volume
Hi Alessandro,
I think the reason why it doesn't work is because Surface In Volume
will work for surfaces which are totally inside a volume. Your
surface
#30 is not, because of the lines #14 and #16 crossing surfaces #26
and
#22 of the volume. Therefore, try to embed those lines in the
surfaces
first:
Line {14} In Surface {26};
Line {16} In Surface {22};
That seems to work.
Best,
Mikhail
On 10/11/2014 05:00 AM, [email protected] wrote:
With reference to the attached .geo file, I am trying to embed
surface
#30 in the volume so that the 3D mesh will conform to the 2d mesh of
the surface. However, it doesn't seem to work. What am I doing wrong?
Thank you.
Regards,
Alessandro
_______________________________________________
gmsh mailing list
[email protected]
http://www.geuz.org/mailman/listinfo/gmsh
