> On 14 Oct 2016, at 08:59, Alessandro Vicini <alessandro.vic...@sitael.com>
> wrote:
>
>
> Hullo Christophe,
>
> here are the .geo and step files I am using.
> In this case yes, I am starting from a .geo kind of geometry, and I want to
> merge a step file into it.
>
Here's what's happening:
1) Delete { Surface{122, 124, 126, 120}; } : you cannot delete these surfaces
- they are embedded in the volume. The error message is bad - this is now fixed
in SVN.
2) Disappearing entities when you merge the .step file in the .geo file : this
is "normal" in the current version, you need to explicitly call "SyncModel;"
before the "Merge", so that the .geo model gets imported right away in the
model database. Otherwise the .step gets imported with entity tags that can
clash with those used in the .geo mode. This explicit sync step is indeed a bit
annoying - the SVN version now does it automatically.
Christophe
> Regards,
>
> Alessandro
>
>
> -----Messaggio originale-----
> Da: Christophe Geuzaine [mailto:cgeuza...@ulg.ac.be]
> Inviato: giovedì 13 ottobre 2016 21.58
> A: Alessandro Vicini
> Cc: gmsh@onelab.info
> Oggetto: Re: [Gmsh] Problems with version 2.14.0 - Part 2
>
>
> It would help if you would send the actual files, and maybe describe what you
> want to do? Do you want to mix .brep and .geo entities in the same model?
>
>> On 12 Oct 2016, at 11:43, Alessandro Vicini <alessandro.vic...@sitael.com>
>> wrote:
>>
>>
>> This is another problem I have with version 2.14.0:
>>
>> 1) I open an existing .geo file and it looks fine, see attached
>> geometry.jpg picture;
>> 2) I interactively delete a few surfaces, obtaining geometry_2.jpg. If I
>> look at the geo file, I have these lines at the end:
>>
>> Delete {
>> Surface{122, 124, 126, 120};
>> }
>>
>> 3) The problem is that, when I issue the “delete” command, I get these
>> (apparent) error messages in the console:
>>
>> Error : Unknown surface 515812064
>> Error : Unknown surface 515812632
>> Error : Unknown surface 515826792
>> Error : Unknown surface 515813200
>> Error : Unknown surface 515812064
>> Error : Unknown surface 515812632
>> Error : Unknown surface 515826792
>> Error : Unknown surface 515813200
>>
>> 4) I see the same kind of (apparent) errors also if I reload the .geo file
>> (I say apparent because in the graphics window the geometry looks ok).
>>
>> Where is the problem? Thank you.
>>
>> Alessandro
>>
>>
>>
>>
>> <geometry.jpg><geometry_2.jpg>________________________________________
>> _______
>> gmsh mailing list
>> gmsh@onelab.info
>> http://onelab.info/mailman/listinfo/gmsh
>
> --
> Prof. Christophe Geuzaine
> University of Liege, Electrical Engineering and Computer Science
> http://www.montefiore.ulg.ac.be/~geuzaine
>
> Free software: http://gmsh.info | http://getdp.info | http://onelab.info
>
> <example.geo><brick.stp>
--
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science
http://www.montefiore.ulg.ac.be/~geuzaine
Free software: http://gmsh.info | http://getdp.info | http://onelab.info
_______________________________________________
gmsh mailing list
gmsh@onelab.info
http://onelab.info/mailman/listinfo/gmsh
