I have seen that happen when a Cisco has packet filters turned on and is blocking your ssh attempt.
- Marc On Thu, 12 Dec 2002 [EMAIL PROTECTED] wrote: > > Does this make sense to *anyone*? > > This information is from a system currently not responding to pings > (as described previously in the thread). > > # ifconfig > eth0 Link encap:Ethernet HWaddr 00:D0:A8:00:D6:DE > inet addr:192.168.10.11 Bcast:192.168.10.255 Mask:255.255.255.0 > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:275555 errors:0 dropped:0 overruns:0 frame:0 > TX packets:276739 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:100 > RX bytes:52875228 (50.4 MiB) TX bytes:331924088 (316.5 MiB) > Interrupt:10 > > eth1 Link encap:Ethernet HWaddr 00:D0:A8:00:D6:DF > inet addr:10.241.38.11 Bcast:10.241.38.255 Mask:255.255.255.0 > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:10902420 errors:0 dropped:0 overruns:0 frame:0 > TX packets:8356304 errors:0 dropped:0 overruns:10 carrier:0 > collisions:0 txqueuelen:100 > RX bytes:2088329274 (1.9 GiB) TX bytes:1876519092 (1.7 GiB) > Interrupt:5 Base address:0x2000 > > lo Link encap:Local Loopback > inet addr:127.0.0.1 Mask:255.0.0.0 > UP LOOPBACK RUNNING MTU:16436 Metric:1 > RX packets:9818 errors:0 dropped:0 overruns:0 frame:0 > TX packets:9818 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:0 > RX bytes:21383856 (20.3 MiB) TX bytes:21383856 (20.3 MiB) > > # netstat -rn > Kernel IP routing table > Destination Gateway Genmask Flags MSS Window irtt Iface > 10.241.38.0 0.0.0.0 255.255.255.0 U 40 0 0 eth1 > 192.168.10.0 0.0.0.0 255.255.255.0 U 40 0 0 eth0 > 0.0.0.0 10.241.38.1 0.0.0.0 UG 40 0 0 eth1 > 0.0.0.0 192.168.10.1 0.0.0.0 UG 40 0 0 eth0 > > # ping 168.159.36.90 > PING 168.159.36.90 (168.159.36.90): 56 data bytes > 64 bytes from 168.159.36.90: icmp_seq=0 ttl=254 time=0.4 ms > 64 bytes from 168.159.36.90: icmp_seq=1 ttl=254 time=0.2 ms > > --- 168.159.36.90 ping statistics --- > 2 packets transmitted, 2 packets received, 0% packet loss > round-trip min/avg/max = 0.2/0.3/0.4 ms > bldsvr:~# ssh -l pll 168.159.36.90 > ssh: connect to address 168.159.36.90 port 22: No route to host > > # traceroute 168.159.36.90 > traceroute to 168.159.36.90 (168.159.36.90), 30 hops max, 38 byte packets > 1 10.241.38.2 (10.241.38.2) 2.563 ms 0.452 ms 0.346 ms > 2 168.159.36.90 (168.159.36.90) 0.191 ms 0.208 ms 0.177 ms > > -- > > Seeya, > Paul > -- > Key fingerprint = 1660 FECC 5D21 D286 F853 E808 BB07 9239 53F1 28EE > > It may look like I'm just sitting here doing nothing, > but I'm really actively waiting for all my problems to go away. > > If you're not having fun, you're not doing it right! > > > _______________________________________________ > gnhlug-discuss mailing list > [EMAIL PROTECTED] > http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss > _______________________________________________ gnhlug-discuss mailing list [EMAIL PROTECTED] http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss
