Hi Shao, are you know a way of installing device drivers for not connected "phantom" devices with a commandline tool eg. devcon . I allready try the usual comandline switches, but it seems to me that I can only install drivers for connected devices with devcon. If not I have to stay with my AutoIT script for the Device Manager.
Thanks Marc Miller, Shao schrieb: > Good day Marc, > > Excellent news; I'm glad you found the installation that is crashing > you. So: > > At this point, I assume that you've been able to properly shut down the > client after the SAN-boot successfully. If so, then the PCI-to-PCI > bridge is sitting there in the Registry, waiting to be installed. If > you boot this SAN image in a virtual machine as the "real" hard disk > drive, or boot the SAN image on the original computer it came from, you > can then go into Device Manager and install the device. After that, it > will be already-installed for the target system. You'll need to follow > the instructions on the wiki guide you've already referenced[1] to show > the "phantom" device. > > - Shao Miller > > [1] http://www.etherboot.org/wiki/appnotes/port_winnt_sanboot > > _______________________________________________ gPXE mailing list [email protected] http://etherboot.org/mailman/listinfo/gpxe
