On Wed, 2010-10-06 at 11:43 +0800, Guo-Fu Tseng wrote: > On Mon, 4 Oct 2010 23:46:27 -0400, Michael A. Collins wrote > > This is offically driving me mad! I just setup a iSCSI-SCST box with > > the put_page patches applied and verified that it works by installing > > Fedora 13 from a box to a target. Now when I go to boot the dang > > thing it doesn't seem to want to. my iqn is right and whether I type > > it in from the gPXE command-line or set it with option 17, the result > > is the same. I can see the box connect to my target, but after a few > > back and forths I get the following in my target logs: iscsi-scst: > > __iscsi_state_change:437:***ERROR***: Connection with initiator > > iqn.2000-09.org.etherboot:UNKNOWN unexpectedly closed! > > > > This is the only error message that I can make out. I tried capturing > > the traffic at the target box, but that's even more confusing. The > > last few packets were the following: target -> client : SCSI: Data In > > LUN: 0x00 (Read Capacity(10) Response Data) client -> target : [PSH, ACK] > > client -> target : [FIN, PSH, ACK] > > target -> client : [FIN, ACK] > > target -> client : [FIN, ACK] > > target -> client : [FIN, ACK] > > target -> client : [FIN, ACK] > > target -> client : [FIN, ACK] > > > > So, my question is what the heck is going on here. Obviously, the > > target must be working or I wouldn't have been able to install the > > client box in the first place. The partition is bootable and there, > > checked by mounting locally and verifying with fdisk and lvm. Where > > can I start looking from the gPXE side, is there a way to dump a bunch > > of iscsi logs to the screen during sanboot? I want to make sure that > > I'm troubleshooting the right piece. Any help would be great! I have > > attached a capture file and an exerpt from my target logs. Mike > Hi Mike: > This issue looks familiar to me. > It seems related to the TCP stack fix I worked on before. > Could you see if this branch solve the problem: > git clone -b tcpfix2 git://git.etherboot.org/scm/people/cooldavid/gpxe.git > > Guo-Fu Tseng > No change. Still recieving the same error. Mike
_______________________________________________ gPXE mailing list gPXE@etherboot.org http://etherboot.org/mailman/listinfo/gpxe