Antonio,
I don't see any errors in the jobmanager log file below. It goes
from
ACTIVE (GRAM_SCRIPT_JOB_STATE = 2) to DONE (8)
I see a time mismatch between the gatekeeper log timestamp (11:50)
and
the jobmanager timestamp (12:16), are you sure these are the logs for
that job submission attempt?
Here is faq on that particular error.
http://www.globus.org/toolkit/docs/2.4/faq_errors.html#transfer
Can you clean out all log files and try again?
-Stu
On Oct 8, 2008, at Oct 8, 5:24 AM, Antonio J. Rossi wrote:
> Hi!
>
> I have got that same problem, I'm trying to install Globus Toolkit
> and Gridway. Gridway has some prerequisites (WS-GRAM and pre-WSGRAM
> included). I have successfuly installed WSGRAM, i submit jobs and
> all of them are executed flawlessly, but i have the same problem as
> you when i try to submit a job with globus-job-run. Exactly:
>
> [EMAIL PROTECTED]:~$ globus-job-run globus-grid3 /bin/date
> GRAM Job submission failed because data transfer to the server
> failed (error code 10)
>
> Globus Gatekeeper seems to be up and running fine:
>
> [EMAIL PROTECTED]:~$ cat /usr/local/globus-4.2.0.1/var/globus-
> gatekeeper.log
> TIME: Wed Oct 8 11:50:34 2008
> PID: 8808 -- Notice: 6: globus-gatekeeper pid=8808 starting at Wed
> Oct 8 11:50:34 2008
>
> TIME: Wed Oct 8 11:50:34 2008
> PID: 8808 -- Notice: 6: GRAM contact: globus-grid3:2119:/O=citic-
> grid/OU=globus-server/OU=SimpleCA-citic/CN=host/globus-grid3
>
> and like in your case, auth seems to work fine too:
>
> [EMAIL PROTECTED]:~$ globusrun -a -r globus-grid3
>
> GRAM Authentication test successful
>
> That is the log generated after globus-job-run command:
>
> [EMAIL PROTECTED]:~$ cat gram_job_mgr_9138.log
> 10/8 12:16:21 JM: TARGET_GLOBUS_LOCATION = /usr/local/
globus-4.2.0.1
> 10/8 12:16:21 JM: Security context imported
> 10/8 12:16:21 JM: Adding new callback contact (url=https://globus-grid3:34548/
> , mask=1048575)
> 10/8 12:16:21 JM: Added successfully
> 10/8 12:16:21 Pre-parsed RSL string: &("rsl_substitution" =
> ("GLOBUSRUN_GASS_URL" "https://globus-grid3:50809"; ) )("stderr" = $
> ("GLOBUSRUN_GASS_URL") # "/dev/stderr" )("stdout" = $
> ("GLOBUSRUN_GASS_URL") # "/dev/stdout" )("executable" = "/bin/
date" )
> 10/8 12:16:21
> <<<<<Job Request RSL
> &("rsl_substitution" = ("GLOBUSRUN_GASS_URL" "https://globus-grid3:50809
> " ) )("stderr" = $("GLOBUSRUN_GASS_URL") # "/dev/stderr" )("stdout"
> = $("GLOBUSRUN_GASS_URL") # "/dev/stdout" )("executable" = "/bin/
> date" )
> >>>>>Job Request RSL
> 10/8 12:16:21
> <<<<<Job Request RSL (canonical)
> &("rslsubstitution" = ("GLOBUSRUN_GASS_URL" "https://globus-grid3:50809
> " ) )("stderr" = $("GLOBUSRUN_GASS_URL") # "/dev/stderr" )("stdout"
> = $("GLOBUSRUN_GASS_URL") # "/dev/stdout" )("executable" = "/bin/
> date" )
> >>>>>Job Request RSL (canonical)
> 10/8 12:16:21 JM: Evaluating RSL Value10/8 12:16:21 JM: Evaluated
> RSL Value to GLOBUSRUN_GASS_URL10/8 12:16:21 JM: Evaluating RSL
> Value10/8 12:16:21 JM: Evaluated RSL Value to https://globus-grid3:5080910/8
> 12:16:21 Job Manager State Machine (entering):
> GLOBUS_GRAM_JOB_MANAGER_STATE_MAKE_SCRATCHDIR
> 10/8 12:16:21
> <<<<<Job RSL
> &("environment" = ("HOME" "/home/templeir" ) ("LOGNAME"
> "templeir" ) )("rslsubstitution" = ("GLOBUSRUN_GASS_URL"
"https://globus-grid3:50809
> " ) )("stderr" = $("GLOBUSRUN_GASS_URL") # "/dev/stderr" )("stdout"
> = $("GLOBUSRUN_GASS_URL") # "/dev/stdout" )("executable" = "/bin/
> date" )
> >>>>>Job RSL
> 10/8 12:16:21
> <<<<<Job RSL (post-eval)
> &("environment" = ("HOME" "/home/templeir" ) ("LOGNAME"
> "templeir" ) )("rslsubstitution" = ("GLOBUSRUN_GASS_URL"
"https://globus-grid3:50809
> " ) )("stderr" = "https://globus-grid3:50809/dev/stderr"; )("stdout"
> = "https://globus-grid3:50809/dev/stdout"; )("executable" = "/bin/
> date" )
> >>>>>Job RSL (post-eval)
> Adding default RSL of proxy_timeout = 60
> Adding default RSL of dry_run = no
> Adding default RSL of gram_my_job = collective
> Adding default RSL of job_type = multiple
> Adding default RSL of count = 1
> Adding default RSL of stdin = /dev/null
> Adding default RSL of directory = $(HOME)
> 10/8 12:16:21
> <<<<<Job RSL (post-validation)
> &("directory" = $("HOME") )("stdin" = "/dev/null" )("count" = "1" )
> ("job_type" = "multiple" )("gram_my_job" = "collective" )("dry_run"
> = "no" )("proxy_timeout" = "60" )("environment" = ("HOME" "/home/
> templeir" ) ("LOGNAME" "templeir" ) )("rslsubstitution" =
> ("GLOBUSRUN_GASS_URL" "https://globus-grid3:50809"; ) )("stderr" =
"https://globus-grid3:50809/dev/stderr
> " )("stdout" = "https://globus-grid3:50809/dev/stdout"; )
> ("executable" = "/bin/date" )
> >>>>>Job RSL (post-validation)
> 10/8 12:16:21
> <<<<<Job RSL (post-validation-eval)
> &("directory" = "/home/templeir" )("stdin" = "/dev/null" )
("count" =
> "1" )("job_type" = "multiple" )("gram_my_job" = "collective" )
> ("dry_run" = "no" )("proxy_timeout" = "60" )("environment" =
("HOME"
> "/home/templeir" ) ("LOGNAME" "templeir" ) )("rslsubstitution" =
> ("GLOBUSRUN_GASS_URL" "https://globus-grid3:50809"; ) )("stderr" =
"https://globus-grid3:50809/dev/stderr
> " )("stdout" = "https://globus-grid3:50809/dev/stdout"; )
> ("executable" = "/bin/date" )
> >>>>>Job RSL (post-validation-eval)
> 10/8 12:16:21 JMI: Getting RSL output value
> 10/8 12:16:21 JMI: Processing output positions
> 10/8 12:16:21 JMI: Getting RSL output value
> 10/8 12:16:21 JMI: Processing output positions
> 10/8 12:16:21 Job Manager State Machine (entering):
> GLOBUS_GRAM_JOB_MANAGER_STATE_REMOTE_IO_FILE_CREATE
> 10/8 12:16:21 JM: Opening output destinations
> 10/8 12:16:21 JM: stdout goes to /home/templeir/.globus/job/globus-
> grid3/9138.1223460981/stdout
> 10/8 12:16:21 JM: stderr goes to /home/templeir/.globus/job/globus-
> grid3/9138.1223460981/stderr
> 10/8 12:16:21 JM: Opening https://globus-grid3:50809/dev/stdout
> 10/8 12:16:21 JM: Opened GASS handle 1.
> 10/8 12:16:21 JM: exiting
> globus_l_gram_job_manager_output_destination_open()
> 10/8 12:16:21 JM: Opening https://globus-grid3:50809/dev/stderr
> 10/8 12:16:21 JM: Opened GASS handle 2.
> 10/8 12:16:21 JM: exiting
> globus_l_gram_job_manager_output_destination_open()
> 10/8 12:16:21 stdout or stderr is being used, starting to poll
> 10/8 12:16:21 JM: Finished opening output destinations
> 10/8 12:16:21 Job Manager State Machine (entering):
> GLOBUS_GRAM_JOB_MANAGER_STATE_OPEN_OUTPUT
> 10/8 12:16:21 JM: GSSAPI type is GSI.. relocating proxy
> 10/8 12:16:21 JMI: testing job manager scripts for type fork exist
> and permissions are ok.
> 10/8 12:16:21 JMI: completed script validation: job manager type is
> fork.
> 10/8 12:16:21 JMI: in
globus_gram_job_manager_script_proxy_relocate()
> 10/8 12:16:21 JMI: cmd = proxy_relocate
> Wed Oct 8 12:16:22 2008 JM_SCRIPT: New Perl JobManager created.
> Wed Oct 8 12:16:22 2008 JM_SCRIPT: Using jm supplied job dir: /
home/
> templeir/.globus/job/globus-grid3/9138.1223460981
> Wed Oct 8 12:16:22 2008 JM_SCRIPT: proxy_relocate(enter)
> 10/8 12:16:22 JMI: while return_buf = GRAM_SCRIPT_X509_USER_PROXY
= /
> home/templeir/.globus/job/globus-grid3/9138.1223460981/x509_up
> 10/8 12:16:22 Job Manager State Machine (entering):
> GLOBUS_GRAM_JOB_MANAGER_STATE_PROXY_RELOCATE
> 10/8 12:16:22 JM: Relocated Proxy to /home/templeir/.globus/job/
> globus-grid3/9138.1223460981/x509_up
> 10/8 12:16:22 JM: before sending to client: rc=0 (Success)
> 10/8 12:16:22 Job Manager State Machine (exiting):
> GLOBUS_GRAM_JOB_MANAGER_STATE_TWO_PHASE
> 10/8 12:16:22 Job Manager State Machine (entering):
> GLOBUS_GRAM_JOB_MANAGER_STATE_TWO_PHASE
> 10/8 12:16:22 Job Manager State Machine (entering):
> GLOBUS_GRAM_JOB_MANAGER_STATE_TWO_PHASE_COMMITTED
> 10/8 12:16:22 Job Manager State Machine (entering):
> GLOBUS_GRAM_JOB_MANAGER_STATE_STAGE_IN
> 10/8 12:16:22 JMI: testing job manager scripts for type fork exist
> and permissions are ok.
> 10/8 12:16:22 JMI: completed script validation: job manager type is
> fork.
> 10/8 12:16:22 JMI: in globus_gram_job_manager_submit()
> 10/8 12:16:22 JMI: local stdout filename = /home/templeir/.globus/
> job/globus-grid3/9138.1223460981/stdout.
> 10/8 12:16:22 JMI: local stderr filename = /home/templeir/.globus/
> job/globus-grid3/9138.1223460981/stderr.
> 10/8 12:16:22 JMI: cmd = submit
> 10/8 12:16:22 JMI: returning with success
> Wed Oct 8 12:16:22 2008 JM_SCRIPT: New Perl JobManager created.
> Wed Oct 8 12:16:22 2008 JM_SCRIPT: Using jm supplied job dir: /
home/
> templeir/.globus/job/globus-grid3/9138.1223460981
> 10/8 12:16:22 JMI: while return_buf = GRAM_SCRIPT_JOB_ID = 9146
> 10/8 12:16:22 JMI: while return_buf = GRAM_SCRIPT_JOB_STATE = 2
> 10/8 12:16:22 Job Manager State Machine (entering):
> GLOBUS_GRAM_JOB_MANAGER_STATE_SUBMIT
> 10/8 12:16:22 JM: in
globus_gram_job_manager_reporting_file_create()
> 10/8 12:16:22 JM: not reporting job information
> 10/8 12:16:22 JM: in globus_gram_job_manager_history_file_create()
> 10/8 12:16:22 JM: NOT empty client callback list.
> 10/8 12:16:22 JM: sending callback of status 2 (failure code 0)
to https://globus-grid3:34548/
> .
> 10/8 12:16:22 Job Manager State Machine (entering):
> GLOBUS_GRAM_JOB_MANAGER_STATE_POLL2
> 10/8 12:16:22 JMI: testing job manager scripts for type fork exist
> and permissions are ok.
> 10/8 12:16:22 JMI: completed script validation: job manager type is
> fork.
> 10/8 12:16:22 JMI: in globus_gram_job_manager_poll()
> 10/8 12:16:22 JMI: local stdout filename = /home/templeir/.globus/
> job/globus-grid3/9138.1223460981/stdout.
> 10/8 12:16:22 JMI: local stderr filename = /home/templeir/.globus/
> job/globus-grid3/9138.1223460981/stderr.
> 10/8 12:16:22 JMI: poll: seeking: https://globus-grid3:48376/9138/1223460981/
> 10/8 12:16:22 JMI: poll_fast: returning -1 = GLOBUS_FAILURE (try
> Perl scripts)
> 10/8 12:16:22 JMI: cmd = poll
> 10/8 12:16:22 JMI: returning with success
> Wed Oct 8 12:16:22 2008 JM_SCRIPT: New Perl JobManager created.
> Wed Oct 8 12:16:22 2008 JM_SCRIPT: Using jm supplied job dir: /
home/
> templeir/.globus/job/globus-grid3/9138.1223460981
> Wed Oct 8 12:16:22 2008 JM_SCRIPT: polling job 9146
> 10/8 12:16:22 JMI: while return_buf = GRAM_SCRIPT_JOB_STATE = 8
> 10/8 12:16:22 Job Manager State Machine (entering):
> GLOBUS_GRAM_JOB_MANAGER_STATE_POLL1
> 10/8 12:16:22 JM: in globus_gram_job_manager_history_file_create()
> 10/8 12:16:22 Job Manager State Machine (entering):
> GLOBUS_GRAM_JOB_MANAGER_STATE_PRE_CLOSE_OUTPUT
> 10/8 12:16:22 closing destination https://globus-grid3:50809/dev/
> stderr
> 10/8 12:16:22 JM: exiting
> globus_l_gram_job_manager_output_destination_close()
>
> I have no idea where the problem is or how to fix it. So i need
some
> help, thanks!
>
> Antonio J. Rossi
>
>
>
>
> El mar, 07-10-2008 a las 14:13 +1100, Yoichi Takayama escribió:
>>
>> $ globus-job-run grid2.ramscommunity.org/jobmanager-fork /bin/
>> hostname
>> GRAM Job submission failed because data transfer to the server
failed
>> (error code 10)
>>
>> $ globus-job-run grid2.ramscommunity.org/jobmanager-condor /bin/
>> hostname
>> GRAM Job submission failed because data transfer to the server
failed
>> (error code 10)
>>
>>
>> Although auth is still successful???
>>
>> $ globusrun -a -r grid2.ramscommunity.org/jobmanager-condor
>> GRAM Authentication test successful
>>
>>
>> $ cat globus-gatekeeper.log
>> ...
>> ...
>> TIME: Tue Oct 7 14:04:30 2008
>> PID: 17159 -- Notice: 6: globus-gatekeeper pid=17159 starting at
>> Tue
>> Oct 7 14:04:30 2008
>>
>> TIME: Tue Oct 7 14:04:30 2008
>> PID: 17159 -- Notice: 6: Got connection 137.111.246.176 at Tue
Oct
>> 7 14:04:30 2008
>>
>> TIME: Tue Oct 7 14:04:30 2008
>> PID: 17159 -- Notice: 5: Authenticated globus user: /O=Grid/
>> OU=GlobusTest/OU=simpleCA-grid2.ramscommunity.org/
>> OU=ramscommunity.org/
>> CN=Yoichi Takayama
>> TIME: Tue Oct 7 14:04:30 2008
>> PID: 17159 -- Notice: 0: GRID_SECURITY_HTTP_BODY_FD=6
>> TIME: Tue Oct 7 14:04:30 2008
>> PID: 17159 -- Notice: 5: Requested service: jobmanager-condor
>> TIME: Tue Oct 7 14:04:30 2008
>> PID: 17159 -- Notice: 5: Authorized as local user: yoichi
>> TIME: Tue Oct 7 14:04:30 2008
>> PID: 17159 -- Notice: 5: Authorized as local uid: 500
>> TIME: Tue Oct 7 14:04:30 2008
>> PID: 17159 -- Notice: 5: and local gid: 500
>> TIME: Tue Oct 7 14:04:30 2008
>> PID: 17159 -- Notice: 0: executing /usr/local/globus/libexec/
>> globus-
>> job-manager
>> TIME: Tue Oct 7 14:04:30 2008
>> PID: 17159 -- Notice: 0: GRID_SECURITY_CONTEXT_FD=9
>> TIME: Tue Oct 7 14:04:30 2008
>> PID: 17159 -- Notice: 0: Child 17160 started
>> Warning: Ignoring unknown argument -seg
>>
>> (I will remove -seg later, but this seems to be harmless)
>>
>>
>> It does not tell me what exactly may be wrong.
>>
>>
>>
>> $ cat globus-condor.log
>> <c>
>> <a n="MyType"><s>SubmitEvent</s></a>
>> <a n="EventTypeNumber"><i>0</i></a>
>> <a n="MyType"><s>SubmitEvent</s></a>
>> <a n="EventTime"><s>2008-10-07T14:04:31</s></a>
>> <a n="Cluster"><i>29</i></a>
>> <a n="Proc"><i>0</i></a>
>> <a n="Subproc"><i>0</i></a>
>> <a n="SubmitHost"><s><137.111.246.176:9670></s></a>
>> </c>
>> <c>
>> <a n="MyType"><s>ShadowExceptionEvent</s></a>
>> <a n="EventTypeNumber"><i>7</i></a>
>> <a n="MyType"><s>ShadowExceptionEvent</s></a>
>> <a n="EventTime"><s>2008-10-07T14:04:45</s></a>
>> <a n="Cluster"><i>29</i></a>
>> <a n="Proc"><i>0</i></a>
>> <a n="Subproc"><i>0</i></a>
>> <a n="Message"><s>Error from starter on
grid4.ramscommunity.org:
>> Failed to open '/home/yoichi/.globus/job/grid2.ramscommunity.org/
>> 17160.1223348670/stdout' as standard output: No such file or
>> directory
>> (errno 2)</s></a>
>> <a n="SentBytes"><r>0.000000000000000E+00</r></a>
>> <a n="ReceivedBytes"><r>0.000000000000000E+00</r></a>
>> </c>
>> <c>
>> <a n="MyType"><s>JobHeldEvent</s></a>
>> <a n="EventTypeNumber"><i>12</i></a>
>> <a n="MyType"><s>JobHeldEvent</s></a>
>> <a n="EventTime"><s>2008-10-07T14:04:45</s></a>
>> <a n="Cluster"><i>29</i></a>
>> <a n="Proc"><i>0</i></a>
>> <a n="Subproc"><i>0</i></a>
>> <a n="HoldReason"><s>Error from starter on
>> grid4.ramscommunity.org: Failed to open '/home/yoichi/.globus/job/
>> grid2.ramscommunity.org/17160.1223348670/stdout' as standard
output:
>> No such file or directory (errno 2)</s></a>
>> <a n="HoldReasonCode"><i>7</i></a>
>> <a n="HoldReasonSubCode"><i>7</i></a>
>> </c>
>>
>> Either I have to create the stdout or jobmanager is having a
>> difficulty creating it???
>>
>>
>>
--------------------------------------------------------------------------
>> Yoichi Takayama, PhD
>> Senior Research Fellow
>> RAMP Project
>> MELCOE (Macquarie E-Learning Centre of Excellence)
>> MACQUARIE UNIVERSITY
>>
>> Phone: +61 (0)2 9850 9073
>> Fax: +61 (0)2 9850 6527
>> www.mq.edu.au
>> www.melcoe.mq.edu.au/projects/RAMP/
>>
--------------------------------------------------------------------------
>> MACQUARIE UNIVERSITY: CRICOS Provider No 00002J
>>
>> This message is intended for the addressee named and may contain
>> confidential information. If you are not the intended recipient,
>> please delete it and notify the sender. Views expressed in this
>> message are those of the individual sender, and are not
necessarily
>> the views of Macquarie E-Learning Centre Of Excellence (MELCOE) or
>> Macquarie University.
>>
>> On 07/10/2008, at 11:55 AM, Charles Bacon wrote:
>>
>> > Using xinetd to start the gatekeeper is fine; nothing in that
page
>> > tells you to put "-xinetd" in the globus-gatekeeper.conf. Valid
>> > settings are either -inetd or nothing. You want -inetd.
>> >
>> >
>> > Charles
>> >
>> > On Oct 6, 2008, at 7:40 PM, Yoichi Takayama wrote:
>> >
>> >> I thought that it was your own manual!
>> >>
>> >>
http://www.globus.org/toolkit/docs/4.2/4.2.0/execution/gram2/admin/gram2-admin-configuring.html#gram2-admin-starting
>> >>
>> >> This page states both as options and I have copied the /etc/
>> >> xinetd.d/globus-gatekeeper example from it.
>> >>
>> >> i.e.
>> >>
>> >> 2. Configure Inetd and Xinetd
>> >>
>> >> While running globus-personal-gatekeeper as a user is a good
test,
>> >> you will want to configure your machine to run globus-
gatekeeper
>> as
>> >> root, so that other people will be able to use your
gatekeeper. If
>> >> you just run the personal gatekeeper, you won't have
authority to
>> >> su to other user accounts. To setup a full gatekeeper, you will
>> >> need to make the following modifications as root:
>> >>
>> >> In /etc/services, add the service name "gsigatekeeper" to port
>> 2119.
>> >>
>> >> gsigatekeeper 2119/tcp # Globus
Gatekeeper
>> >>
>> >> Depending on whether your host is running inetd or xinetd, you
>> will
>> >> need to modify its configuration. If the directory /etc/
xinetd.d/
>> >> exists, then your host is likely running xinetd. If the
directory
>> >> doesn't exist, your host is likely running inetd. Follow the
>> >> appropriate instructions below according to what your host is
>> >> running.
>> >>
>> >> etc. etc.
>> >>
>> >> Xinetd
>> >>
>> >> For xinetd, add a file called "globus-gatekeeper" to the /etc/
>> >> xinetd.d/ directory that has the following contents. Be sure to
>> >> replace GLOBUS_LOCATION below with the actual value of
>> >> $GLOBUS_LOCATION in your environment.
>> >>
>> >> service gsigatekeeper
>> >> {
>> >> socket_type = stream
>> >> protocol = tcp
>> >> wait = no
>> >> user = root
>> >> env = LD_LIBRARY_PATH=GLOBUS_LOCATION/lib
>> >> server = GLOBUS_LOCATION/sbin/globus-gatekeeper
>> >> server_args = -conf GLOBUS_LOCATION/etc/globus-
gatekeeper.conf
>> >> disable = no
>> >> }
>> >>
>> >> In general, I am running xinetd than inetd. for GridFTP and
>> MyProxy:
>> >>
>> >> # ls -l /etc/xinetd.d
>> >> total 168
>> >> -rw-r--r-- 1 root root 333 Oct 5 00:48 globus-gatekeeper
>> >> -rw-r--r-- 1 root root 495 Sep 30 21:19 gridftp
>> >> -rw-r--r-- 1 root root 326 Sep 9 2004 gssftp
>> >> -rw-r--r-- 1 root root 310 Sep 9 2004 klogin
>> >> ...
>> >> -rw-r--r-- 1 root root 279 Sep 24 08:56 myproxy
>> >> ...
>> >>
>> >> Although it does not seem to be wrong to be using xinetd,
should I
>> >> also install inetd???
>> >>
>> >> Thanks,
>> >> Yoichi
>> >>
>> >>
>> >>
>>
--------------------------------------------------------------------------
>> >> Yoichi Takayama, PhD
>> >> Senior Research Fellow
>> >> RAMP Project
>> >> MELCOE (Macquarie E-Learning Centre of Excellence)
>> >> MACQUARIE UNIVERSITY
>> >>
>> >> Phone: +61 (0)2 9850 9073
>> >> Fax: +61 (0)2 9850 6527
>> >> www.mq.edu.au
>> >> www.melcoe.mq.edu.au/projects/RAMP/
>> >>
>>
--------------------------------------------------------------------------
>> >> MACQUARIE UNIVERSITY: CRICOS Provider No 00002J
>> >>
>> >> This message is intended for the addressee named and may
contain
>> >> confidential information. If you are not the intended
recipient,
>> >> please delete it and notify the sender. Views expressed in this
>> >> message are those of the individual sender, and are not
>> necessarily
>> >> the views of Macquarie E-Learning Centre Of Excellence
(MELCOE) or
>> >> Macquarie University.
>> >>
>> >> On 07/10/2008, at 6:45 AM, Charles Bacon wrote:
>> >>
>> >>> xinetd does not appear to be a legal option; what document
>> >>> instructed you to use that? I believe it should just be "-
>> inetd".
>> >>>
>> >>>
>> >>> Charles
>> >>>
>> >>> On Oct 6, 2008, at 10:45 AM, Yoichi Takayama wrote:
>> >>>
>> >>>> Trying the real gatekeeper 2119(tcp):
>> >>>>
>> >>>>
>> >>>> $ globus-job-run "grid2.ramscommunity.org:2119:/O=Grid/
>> >>>> OU=GlobusTest/OU=simpleCA-grid2.ramscommunity.org/
>> >>>> OU=ramscommunity.org/CN=Yoichi Takayama" /bin/date
>> >>>> GRAM Job submission failed because the connection to the
server
>> >>>> failed (check host and port) (error code 12)
>> >>>>
>> >>>>
>> >>>> Trying the real gatekeeper 2119(tcp) with telnet:
>> >>>>
>> >>>> $ telnet -l '/O=Grid/OU=GlobusTest/OU=simpleCA-
>> >>>> grid2.ramscommunity.org/OU=ramscommunity.org/CN=Yoichi
Takayama'
>> >>>> grid2.ramscommunity.org 2119
>> >>>> Trying 137.111.246.176...
>> >>>> Connected to grid2.ramscommunity.org (137.111.246.176).
>> >>>> Escape character is '^]'.
>> >>>> Unknown argument -xinetd
>> >>>> Usage: globus-gatekeeper {-conf parmfile [-test]} | {[-
d[ebug]
>> [-
>> >>>> inetd | -f] [-p[ort] port] [-home path] [-l[ogfile] logfile]
>> [-e
>> >>>> path] [-grid_services file] [-globusid globusid] [-gridmap
>> >>>> file] [-globuspwd file] [-x509_cert_dir path] [-
x509_cert_file
>> >>>> file] [-x509_user_cert file] [-x509_user_key file] [-
>> >>>> x509_user_proxy file] [-k] [-globuskmap file] [-test]}
>> >>>> Connection closed by foreign host.
>> >>>>
>> >>>>
>> >>>>
>> >>>> Yoichi
>> >>>>
>> >>>>
>>
--------------------------------------------------------------------------
>> >>>> Yoichi Takayama, PhD
>> >>>> Senior Research Fellow
>> >>>> RAMP Project
>> >>>> MELCOE (Macquarie E-Learning Centre of Excellence)
>> >>>> MACQUARIE UNIVERSITY
>> >>>>
>> >>>> Phone: +61 (0)2 9850 9073
>> >>>> Fax: +61 (0)2 9850 6527
>> >>>> www.mq.edu.au
>> >>>> www.melcoe.mq.edu.au/projects/RAMP/
>> >>>>
>>
--------------------------------------------------------------------------
>> >>>> MACQUARIE UNIVERSITY: CRICOS Provider No 00002J
>> >>>>
>> >>>> This message is intended for the addressee named and may
contain
>> >>>> confidential information. If you are not the intended
>> recipient,
>> >>>> please delete it and notify the sender. Views expressed in
this
>> >>>> message are those of the individual sender, and are not
>> >>>> necessarily the views of Macquarie E-Learning Centre Of
>> >>>> Excellence (MELCOE) or Macquarie University.
>> >>>>
>> >>>> On 07/10/2008, at 1:49 AM, Charles Bacon wrote:
>> >>>>
>> >>>>> If you have a real gatekeeper on 2119, you can submit to
that
>> as
>> >>>>> a test also, and get a log in the normal location.
>> >>>>>
>> >>>>> globus-personal-gatekeeper also has logs. See the -help for
>> the
>> >>>>> -list and -directory options to find the temporary directory
>> used.
>> >>>>>
>> >>>>>
>> >>>>> Charles
>> >>>>>
>> >>>>> On Oct 6, 2008, at 9:16 AM, Yoichi Takayama wrote:
>> >>>>>
>> >>>>>> Hi
>> >>>>>>
>> >>>>>> Thanks for the reply, but this is the test (personal-
>> >>>>>> gatekeeper) and as I said it does not leave any log entry
in
>> >>>>>> the real log: $GLOBUS_LOCATION/var/globus-gatekeeper.log.
No
>> >>>>>> new entry is there around the time the error occurred. (I
will
>> >>>>>> check earlier error - maybe at the start up time errors).
>> >>>>>>
>> >>>>>> ---------------------------------------------------------
>> >>>>>> $ myproxy-logon -s grid2 (or grid-prpxy-init)
>> >>>>>>
>> >>>>>> $ globus-personal-gatekeeper -start
>> >>>>>>
>> >>>>>> GRAM contact: grid2.ramscommunity.org:37335:/O=Grid/
>> >>>>>> OU=GlobusTest/OU=simpleCA-grid2.ramscommunity.org/
>> >>>>>> OU=ramscommunity.org/CN=Yoichi Takayama
>> >>>>>>
>> >>>>>> $ globus-job-run "grid2.ramscommunity.org:37335:/O=Grid/
>> >>>>>> OU=GlobusTest/OU=simpleCA-grid2.ramscommunity.org/
>> >>>>>> OU=ramscommunity.org/CN=Yoichi Takayama" /bin/date
>> >>>>>>
>> >>>>>> GRAM Job submission failed because data transfer to the
server
>> >>>>>> failed (error code 10)
>> >>>>>>
>> >>>>>> (just trying single quote for the user QN in case)
>> >>>>>> $ globus-job-run grid2.ramscommunity.org:37335:'/O=Grid/
>> >>>>>> OU=GlobusTest/OU=simpleCA-grid2.ramscommunity.org/
>> >>>>>> OU=ramscommunity.org/CN=Yoichi Takayama' /bin/date
>> >>>>>>
>> >>>>>> GRAM Job submission failed because the connection to the
>> server
>> >>>>>> failed (check host and port) (error code 12)
>> >>>>>>
>> >>>>>> $ globus-personal-gatekeeper -killall
>> >>>>>>
>> >>>>>> killing gatekeeper: "grid2.ramscommunity.org:37335:/O=Grid/
>> >>>>>> OU=GlobusTest/OU=simpleCA-grid2.ramscommunity.org/
>> >>>>>> OU=ramscommunity.org/CN=Yoichi Takayama"
>> >>>>>> ---------------------------------------------------------
>> >>>>>>
>> >>>>>>
>> >>>>>>
>> >>>>>> The entry seems to be correct in the /etc/grid-security/
grid-
>> >>>>>> mapfile
>> >>>>>> ---------------------------------------------------------
>> >>>>>> # cat /etc/grid-security/grid-mapfile
>> >>>>>> "/O=Grid/OU=GlobusTest/OU=simpleCA-grid2.ramscommunity.org/
>> >>>>>> OU=ramscommunity.org/CN=Yoichi Takayama" yoichi
>> >>>>>> ---------------------------------------------------------
>> >>>>>>
>> >>>>>>
>> >>>>>>
>> >>>>>> Also, $GLOBUS_LOCATION/etc/globus-gatekeeper.conf seems OK
>> >>>>>> ---------------------------------------------------------
>> >>>>>> # cat $GLOBUS_LOCATION/etc/globus-gatekeeper.conf
>> >>>>>> -x509_cert_dir /etc/grid-security/certificates
>> >>>>>> -x509_user_cert /etc/grid-security/hostcert.pem
>> >>>>>> -x509_user_key /etc/grid-security/hostkey.pem
>> >>>>>> -gridmap /etc/grid-security/grid-mapfile
>> >>>>>> -home /usr/local/globus
>> >>>>>> -e libexec
>> >>>>>> -logfile var/globus-gatekeeper.log
>> >>>>>> -port 2119
>> >>>>>> -grid_services etc/grid-services
>> >>>>>> -xinetd
>> >>>>>> -seg
>> >>>>>> ---------------------------------------------------------
>> >>>>>>
>> >>>>>>
>> >>>>>> xintet.d for the gatekeeper is set up.
>> >>>>>> ---------------------------------------------------------
>> >>>>>> # cat /etc/xinetd.d/globus-gatekeeper
>> >>>>>> service gsigatekeeper
>> >>>>>> {
>> >>>>>> socket_type = stream
>> >>>>>> protocol = tcp
>> >>>>>> wait = no
>> >>>>>> user = root
>> >>>>>> env = LD_LIBRARY_PATH=/usr/local/globus/lib
>> >>>>>> server = /usr/local/globus/sbin/globus-gatekeeper
>> >>>>>> server_args = -conf /usr/local/globus/etc/globus-
>> gatekeeper.conf
>> >>>>>> disable = no
>> >>>>>> }
>> >>>>>> ---------------------------------------------------------
>> >>>>>>
>> >>>>>>
>> >>>>>> Port 2119 is in the /etc/services and it is LISTENning.
>> >>>>>>
>> >>>>>>
>> >>>>>> Thanks,
>> >>>>>> Yoichi
>> >>>>>>
>> >>>>>>
>>
--------------------------------------------------------------------------
>> >>>>>> Yoichi Takayama, PhD
>> >>>>>> Senior Research Fellow
>> >>>>>> RAMP Project
>> >>>>>> MELCOE (Macquarie E-Learning Centre of Excellence)
>> >>>>>> MACQUARIE UNIVERSITY
>> >>>>>>
>> >>>>>> Phone: +61 (0)2 9850 9073
>> >>>>>> Fax: +61 (0)2 9850 6527
>> >>>>>> www.mq.edu.au
>> >>>>>> www.melcoe.mq.edu.au/projects/RAMP/
>> >>>>>>
>>
--------------------------------------------------------------------------
>> >>>>>> MACQUARIE UNIVERSITY: CRICOS Provider No 00002J
>> >>>>>>
>> >>>>>> This message is intended for the addressee named and may
>> >>>>>> contain confidential information. If you are not the
intended
>> >>>>>> recipient, please delete it and notify the sender. Views
>> >>>>>> expressed in this message are those of the individual
sender,
>> >>>>>> and are not necessarily the views of Macquarie E-Learning
>> >>>>>> Centre Of Excellence (MELCOE) or Macquarie University.
>> >>>>>>
>> >>>>>> On 07/10/2008, at 12:33 AM, Charles Bacon wrote:
>> >>>>>>
>> >>>>>>> Googling for that error string returns a copy of the old
GT2
>> >>>>>>> GRAM error FAQ:
>> >>>>>>> http://drupal.star.bnl.gov/STAR/?q=node/424#transfer
>> >>>>>>>
>> >>>>>>> Try following the advice in that entry.
>> >>>>>>>
>> >>>>>>> Charles
>> >>>>>>>
>> >>>>>>> On Oct 6, 2008, at 7:49 AM, Yoichi Takayama wrote:
>> >>>>>>>
>> >>>>>>>> Hi Charles,
>> >>>>>>>>
>> >>>>>>>> I am trying to install Pegasus with Globus 4.2.0 and
Condor
>> >>>>>>>> 7.0.1.
>> >>>>>>>>
>> >>>>>>>> Apparently Pegasus submits a job via port 2119, I think
that
>> >>>>>>>> it is the gatekeeper (GRAM2).
>> >>>>>>>>
>> >>>>>>>> Since GT 4.2.0 contains GRAM2, I have configured the
>> >>>>>>>> gatekeeper and jobmanager as your instructions:
>> >>>>>>>>
>> >>>>>>>> GT 4.2.0 GRAM2: Admin Guide:
http://www.globus.org/toolkit/docs/4.2/4.2.0/execution/gram2/admin/index.html
>> >>>>>>>>
>> >>>>>>>> Although it uses grid-proxy-init, I think that myproxy
>> should
>> >>>>>>>> also work. (I have also installed certs etc. for grid-
proxy-
>> >>>>>>>> init as the instructions told me).
>> >>>>>>>>
>> >>>>>>>> However, the test described in the instructions
(http://www.globus.org/toolkit/docs/4.2/4.2.0/execution/gram2/admin/gram2-admin-testing.html
>> >>>>>>>> ) fails with:
>> >>>>>>>>
>> >>>>>>>>
>>
------------------------------------------------------------------------------
>> >>>>>>>> $ globus-job-run "grid2.ramscommunity.org:42762:/O=Grid/
>> >>>>>>>> OU=GlobusTest/OU=simpleCA-grid2.ramscommunity.org/
>> >>>>>>>> OU=ramscommunity.org/CN=Yoichi Takayama" /bin/date
>> >>>>>>>> Mon Oct 6 23:00:16 EST 2008
>> >>>>>>>> GRAM Job submission failed because data transfer to the
>> >>>>>>>> server failed (error code 10)
>> >>>>>>>>
>>
------------------------------------------------------------------------------
>> >>>>>>>>
>> >>>>>>>> Since the normal log file for gatekeeper (var/globus-
>> >>>>>>>> gatekeeper.log) does not seem to record the globus-
personal-
>> >>>>>>>> gatekeeper, I cannot tell more than this.
>> >>>>>>>>
>> >>>>>>>> My steps are described at:
>> >>>>>>>>
>> >>>>>>>>
http://wiki.ramp.org.au/display/vmware/4.9+Globus+-+Node+2+-+GRAM2+(gsigatekeeper%2C+jobmanager)
>> >>>>>>>>
>> >>>>>>>> Can you think of some possible causes for this?
>> >>>>>>>>
>> >>>>>>>> Your help would be greatly appreciated.
>> >>>>>>>>
>> >>>>>>>> Regards,
>> >>>>>>>> Yoichi
>> >>>>>>>>
>> >>>>>>>>
>>
--------------------------------------------------------------------------
>> >>>>>>>> Yoichi Takayama, PhD
>> >>>>>>>> Senior Research Fellow
>> >>>>>>>> RAMP Project
>> >>>>>>>> MELCOE (Macquarie E-Learning Centre of Excellence)
>> >>>>>>>> MACQUARIE UNIVERSITY
>> >>>>>>>>
>> >>>>>>>> Phone: +61 (0)2 9850 9073
>> >>>>>>>> Fax: +61 (0)2 9850 6527
>> >>>>>>>> www.mq.edu.au
>> >>>>>>>> www.melcoe.mq.edu.au/projects/RAMP/
>> >>>>>>>>
>>
--------------------------------------------------------------------------
>> >>>>>>>> MACQUARIE UNIVERSITY: CRICOS Provider No 00002J
>> >>>>>>>>
>> >>>>>>>> This message is intended for the addressee named and may
>> >>>>>>>> contain confidential information. If you are not the
>> >>>>>>>> intended recipient, please delete it and notify the
sender.
>> >>>>>>>> Views expressed in this message are those of the
individual
>> >>>>>>>> sender, and are not necessarily the views of Macquarie E-
>> >>>>>>>> Learning Centre Of Excellence (MELCOE) or Macquarie
>> University.
>> >>>>>>>>
>> >>>>>>>>
>> >>>>>>>
>> >>>>>>
>> >>>>>
>> >>>>
>> >>>
>> >>
>> >
>>
