Gvgis work well but I have a last bug! when I open Gvgis sometime (a lot!) I haven't the "layer name" in Table of content (no title "layer name" and non name of my layer) It's a problem because when I try to edit my vector layer I can't because I can't select a layer....
It' a bug of GVsig? JVM? I use finally the 0.2 version (because the 0.3 have not the pan tool). 2012/7/5 Sumit K1 <[email protected]> > Hello Francois, > > I have also faced the same problem so, supposing that you have Terrasync > installed on your Trimble JUNO 3B you can follow these steps or even if you > don't have it you can follow the steps written below because the reason why > it happens is sometimes the NMEA output is switched off by default. We will > use a different software "GPS controller" available with Trimble and they > will provide it free of cost if you ask them or even it can be found online > on their website. > > For this you please follow the following steps: > 1. Unistall gvSIGMobile from Trimble Juno3B. > 2. Copy the "phoneme" folder to the root of the device, i.e. at My Device. > (if you have downloaded the zipped of phoneme). > 3. Go to "My Device\phoneme\pesonal\bin" and click on config file, a new > form shall come. Check all the checkboxes there. Click ok and get out of > there. > 4. Install the GPS Controller and go to the setup menu there in that > software. Go to GNSS settings and you can see an oiption to switch on or > off the NMEA output which need to be set ON there. > 5. Then install gvSIGMobile 0.3 and restart the Trimble device. > 6. Now it should work fine. > > If not, please do let me know. > > Thanks, > Sumit > > [email protected] wrote: ----- > > To: [email protected] > From: fboussug <[email protected]> > Sent by: [email protected] > Date: 07/05/2012 12:53PM > Subject: [Gvsig_english] install Gvsig Mobile 0.3 on Trimble Juno 3B > > > Hello, yesterday I have purchase an Trimble Juno 3B PDA/GPS. > this PDA work on windows 6.5 (Windows Embedded Handheld 6.5 Professionnal). > I want to instal gvsig mobil 0.3 on my Trimble but I have a problem: > -when I use the .CAB installer > "gvSIG_Mobile_Pilot-0.3-WM2003-withPhoneME.cab", installation is OK but > when > I start the application I just can see the start screen (the application > crash). > > -when I use the PhoneMe and Gvsig mobile separately > (gvSIG_Mobile_Pilot-0.3-WMX-forPhoneME.cab and phoneME Advanced - Personal > Profile b168 rev20547 (2011-11-16) download on > http://davy.preuveneers.be/phoneme/?q=node/10) Gvsig work but with a lots > of > bugs: impossible to navigate in different repositories to select layer, > Manual Pan is not disponible, the connection to the GPS make crash the > application (with a "bip bip bip" sound). > > Have you a solution to instal GVSIG 0.3 correctly on my Trimble GPS? > > Thank you! > > François Boussuges > > -- > View this message in context: > http://osgeo-org.1560.n6.nabble.com/install-Gvsig-Mobile-0-3-on-Trimble-Juno-3B-tp4986173.html > Sent from the gvSIG users mailing list archive at Nabble.com. > _______________________________________________ > Gvsig_internacional mailing list > [email protected] > > To see the archives, edit your preferences or unsubscribe from this > mailing list, please access this url: > > http://listserv.gva.es/cgi-bin/mailman/listinfo/gvsig_internacional > > > =====-----=====-----===== > Notice: The information contained in this e-mail > message and/or attachments to it may contain > confidential or privileged information. If you are > not the intended recipient, any dissemination, use, > review, distribution, printing or copying of the > information contained in this e-mail message > and/or attachments to it are strictly prohibited. If > you have received this communication in error, > please notify us by reply e-mail or telephone and > immediately and permanently delete the message > and any attachments. Thank you > > > _______________________________________________ > Gvsig_internacional mailing list > [email protected] > > To see the archives, edit your preferences or unsubscribe from this > mailing list, please access this url: > > http://listserv.gva.es/cgi-bin/mailman/listinfo/gvsig_internacional > >
_______________________________________________ Gvsig_internacional mailing list [email protected] To see the archives, edit your preferences or unsubscribe from this mailing list, please access this url: http://listserv.gva.es/cgi-bin/mailman/listinfo/gvsig_internacional
